• Journal of Pharmaceutical Investigation
• /
• v.34 no.5
• /
• pp.363-368
• /
• 2004

In order to investigate the effect of bovine serum albumin (BSA), as a pore former, on the controlled release of an antibiotic from a biodegradable polymeric device, polycaprolactone (PCL)-cefadroxil matrices were prepared by the solvent casting method. The amount of cefadroxil released from various formulations at $37^{\circ}C$ was measured by HPLC. The duration of antimicrobial activity of matrices against S. aureus was evaluated by measuring the diameters of the inhibition zone. The morphology of the matrices was investigated by scanning electron microscopy (SEM). The release rate and extent of cefadroxil from PCL matrix increased as the loading dose and particle size of BSA/cefadroxil mixture powder increased. Cefadroxil released from the matrix exhibited antibacterial activity for up to 4 days. SEM of the cross-section of matrix showed the typical channel formation after 3 days of release study. Thus, a biodegradable polymeric matrix loaded with antibiotic/BSA mixture can effectively prevent bacterial infection on its surface, thereby bringing about an enhancement of biocompatibility of biomaterials.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.294-301
• /
• 2013

Polymersomes made of biodegradable triblock copolymers based on poly(fumaric acid-co-sebacoyl chloride)/PEG (PEG-co-P(FA/SC)-co-PEG) were prepared and studied in aqueous solutions. TEM confirmed the formation of vesicles in aqueous media. Aggregation behavior of the copolymers was studied by fluorescence spectroscopy of 8-anilino-1-naphthalenesulfonic acid, and the critical aggregation concentration (c.a.c.) of the copolymer was found to be ${\sim}26.2{\mu}M$ indicating desirable stability of the vesicles. Dynamic light scattering revealed that the size of the vesicles was distributed within the range of 170-270 nm. Turbidity measurements confirmed the relative short-term stability of the polymersomes. Carboxyfluorescein, a hydrophilic compound, was simply encapsulated in the vesicles during polymersome preparation. The release of encapsulant from the polymersomes at 25 and $37^{\circ}C$ lasted about 3 weeks, and the rate of release followed a first-order kinetics. The release is speculated to be primarily carried out through diffusion. These results confirm that these polymersomes are promising as controlled-release carriers of various drugs.

• Carbon letters
• /
• v.10 no.3
• /
• pp.208-212
• /
• 2009

Alginate-chitosan blend containing coconut-based activated carbon was prepared as a drug delivery carrier in order to improve the loading and releasing capacity of the drug. The activated carbon was incorporated as effective adsorbent for drug due to the extremely high surface area and pore volume, high adsorption capacity, micro porous structure and specific surface activity. Alginate-chitosan blend containing coconut-based activated carbon showed the sustained release for a longer period. Alginate-chitosan blend showed higher release of drug as the pH increased and higher release of drug as the content of chitosan decreased due to the pH-dependent solubility of blend components.

• Archives of Pharmacal Research
• /
• v.14 no.4
• /
• pp.298-304
• /
• 1991

Isoprinosine, an antiviral agent with a bitter taste, has been clinically used up to a maximum of 4 g daily in 4-8 doses. In this investigation, isoprinosine was microencapsulated with ethylcellulose 22 cps, 50 cps and 100 cps by means of polymer deposition from cyclohexane through temperature change. Complete removal of cyclohexane from the microcapsules was necessary, since ethylcellulose-coated microcapsules obtained from cyclohexane medium were heavily solvated with cyclohexane and formed lumps even after drying. The displacement of cyclohexane by n-hexane during isolation of microcapsules (Method III) or the freezing of the anal-washed microcapsules before drying (Mothod II) provided the dried products which were more discrete microcapsules than those which were simply dried in the air overnight (Method I). Method III was especially the most effective procedure in preparing finer and more discrete microcapsules. The drug-release from microcapsules was influenced by the ratio of core to wall, the viscosity grade of ethylcellulose and the overall microcapsule size. The release rate was adequately fitted to both the first-order and the diffusion-controlled processes. It is therefore possible to design the release-controlled microcapsules with ethylcellulose of different viscosity along with various core to wall ratio.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.2
• /
• pp.93-98
• /
• 2000

In order to evaluate the effect of fabrication methods on the controlled release of an antibiotic from a polymeric device, two types of polyurethane-cefadroxil matrix were prepared by the solvent casting method or the freeze drying method, using bovine serum albumin as a pore former. The amount of cefadroxil released from various formulations at $37^{\circ}C$ was measured by HPLC. The duration of antimicrobial activity of matrices against S. aureus was evaluated by measuring the diameters of the inhibition zone. The morphology of the matrices was investigated by scanning electron microscopy (SEM). Changing the fabrication method could alter the release rate of cefadroxil from the matrix. The matrix fabricated by the freeze drying method had more porous inner structure and showed higher release rate than that prepared by the solvent casting method. However, the duration of antimicrobial activity was shorter when the matrix was fabricated by the freeze drying method.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.143-154
• /
• 2014

Settlement of artificially released abalone, Haliotis discus hannai at the marine farming area in Jeollanam-do in 2007 was very efficient by showing the recapture of 2.0-5.2 ind./m² and the survival rate of 60-67%. The growth of shell after 1 year was highest in Hwoenggando by 75.9 mm and the lowest in Hwasan by 64.6 mm. Our result especially showed that the effect of the stock recruitment was the most efficient when abalone was released. The shell growth of the released abalone was better when sea mustard (Undaria sp.) was provided as food (shell length was up to 23.9 mm) or predators were periodically removed (shell length was up to 23.8 mm) in order to enhance the effect of the artificial release than the control group. The recapture rate was also higher than the control. However due to the difficulty of managing the release areas, it will be more efficient to release the recruited stocks after considering various biological and ecological factors such as survey of suitable release areas, stock size, release density, and health of stocks.

• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.114-120
• /
• 2022

In this study, a comparative dissolution experiment was conducted between an immediate-release and a controlled-release vitamin C tablet applied with a technology to control the dissolution of vitamin C to maintain the vitamin C level in the human body. In order to confirm the dissolution rate (%) of vitamin C tablets, HPLC determination was conducted based on the dissolution test methods in the 'Korean Pharmacopoeia (No. 2020-88),' 'Guidelines on Specifications of Dissolution Tests for Oral dosage Forms,' and 'Standard and Specifications for Health Functional Foods (No. 2020-63)' from Ministry of Food and Drug Safety (MFDS). In addition, the dissolution pattern between the immediate-release tablet and the controlled-release tablet was comparatively analyzed. The analysis result confirmed that the immediate-release vitamin C tablet was 100% dissolved after 45 minutes, while the controlled-release vitamin C tablet was 100% dissolved after 480 minutes (8 hours). Furthermore, the dissolution rate (%) at 60 minutes was slower than that of the immediate-release vitamin C tablet. Based on these results, this study confirmed that the dissolution rate (%) test and development of controlled-release tablets containing vitamin C as the main component a re possible.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.199-207
• /
• 2002

In order to develop a sustained release formulation of bovine somatotropin (BST), which has been used to increase the body weight of oxen or the milk production of dairy cows, poly(D,L-lactide-co-glyceride)(PLGA) microspheres were made by W/O/W multiple emulsification method and solvent extraction method. Physical properties including particle size, drug entrapment, drug release, protein denaturation, and in vivo body weight increase in rats were characterized. The size of the microspheres was increased as the molecular weight of PLGA increased. When Span 65 and stearic acid during preparation were added, the size was decreased but the amount of surface protein was increased, resulting in a high loading efficiency, with fast release of BST from the microspheres. Aggregation or fragmentation of BST by SDS-PAGE during microsphere preparation and drug release study was not observed. Body weight of Sprague-Dawley's male rats was significantly increased after subcutaneous administrations of BST-loaded PLGA microspheres. There was a good correlation between in vivo weight gain and in vitro release rate of microspheres. PLGA microspheres with a high surface protein ratio could be a good candidate for the sustained delivery of BST.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.661-667
• /
• 2011

The purpose of the study was to compare selected kinematic variables between the female medalists and a Korean female javelin thrower at the IAAF World Championships, Daegu 2011. Three medalists and one Korean javelin thrower that participated in the Championships were videotaped using three high-speed cameras (300 frames/s, EX-F1 Exilim, Casio, Japan). This study identified the performance differences between the two groups. The results showed that the Korean female javelin thrower (KFJT) clearly had a greater delivery phase time than the female medalists. In order to throw farther, a thrower must exert a greater force to accelerate their body in a short time. This study also found that the release velocity of the KFJT was lower than that of the female medalists. The KFJT showed evidence of using her extremities differently to achieve the maximum release velocity. When comparing the inclination angle of the trunk across javelin throwers, the lowest value was recorded in the KFJT. Because the trunk position at release plays a significant role in determining the release height and release velocity, the KFJT should not rely on her upper extremities to achieve as high a release velocity as possible.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.4
• /
• pp.275-282
• /
• 1998

In order to develop a desirable in vitro release which correlates well with in vivo bioavailability, hollow type suppository containing Propranolol HCl(PPH) powder in the cavity and conventional type suppository with dispersed PPH in the base were prepared. Polyvinyl alcohol (PVA) hydrogel as a base and PPH as a model drug were used for the preparation of suppository. The rates of drug release from the suppositories were studied by Paddle method, Muranish method, Dialysis tubing method and Rotating dialysis cell method. The release profiles from suppositories using the four different release tests were compared. After a rectal administration in rat, the mean $C_{max}$ of hollow type suppository was significantly lower than that of conventional type, but $T_{max}$, $AUC_{0{\to}12}$ and MRT of hollow type were significantly higher 1.6 times, 1.2 times and 1.9 times than those of conventional type, respectively. The computer program was used to simulate plasma concentration from in vitro released amounts of drug and in vivo pharmacokinetic parameters. Based on comparison of the simulated bioavailability from computer program with experimental bioavailability in rat we have found out in vitro release test which correlates well with in vivo bioavailability. Our results have shown the best correlation between in vitro release and in vivo bioavailability in PPH-PVA hydrogel hollow type suppository for the paddle method and conventional type suppository for the rotating dialysis cell method. In this work we propose that PPH-PVA hydrogel suppository shows in vitro-in vivo correlation. This data should help to optimize the formulation of the drug and provide a basis for quality control procedures.