• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.231-236
• /
• 2014

In this study, the changes in collection efficiencies due to the time changes of activated carbons were ascertained, and in order to identify the magnitude of adsorption, the before-use and after-use iodine adsorption values were analyzed. In addition, as a result of examining the characteristics of continuous process and non-continuous process and as a result of investigating whether the emission standards would be maintained, the continuous process and printing facilities were seen as not being able to maintain the emission standards. Also were found, in the case of non-continuous process,-taking into consideration the special nature of the job -for 4${\o}$ palletized charcoal, a collection efficiency near 50% was shown even after 96 hours. Also, when the inlet concentration was about 300ppm, it is thought that the emission standards would be maintained if the activated carbons are replaced within at least 96 hours in the case of 4${\o}$ palletized charcoal and the use was deemed pointless in the case of carbon. The results of this study are expected to provide assistance in selecting replacement periods for activated carbons and in selecting absorbents at the project sites, and are expected to be of significant help in the selection of precipitators that can collect total hydrocarbons for compliance of the emission standards.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.4
• /
• pp.287-294
• /
• 2002

Objectives : To examine whether cumulative chronic stress influences the immune status, and to verify the effect of social support on the relationship between these two dimensions in male manufacturing workers. Methods : A total of 39 workers were recruited for this study. A structured-questionnaire was used to assess general characteristics, job characteristics (work demand and decision latitude), psychosocial distress, and social support. The serum levels of CD4 and CD8 were measured as immune markers, and were collected between 8:00 and 10:00am in order to standardize the markers. Nonparametric statistics were used to estimate the differences between job characteristics and the immune markers. Results : General characteristics, and health-related behaviors, were not associated with CD4, CD8 or CD4/CD8. No relationships were found between job characteristics and the mean levels of immune reactivity. These results were consistent, even after controlling for social support. Social support failed to modify the relationship toward work demand, decision latitude or psychosocial distress to CD4, CD8, and CD4/CD8. Conclusion : Cumulative chronic life stress might not influence the immune status, and the effects of social support on the immune function under chronic stress, may not play a crucial role in modifying the relationships. This implication supports that the effect of stress on the immune function may be determined by the characteristics of that stress. further research should effectively considers the type, magnitude and timing of a stress event, and modifiable factors, such as personality traits, coping style, and hormone excretion levels, on the alteration of immune status.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.28-34
• /
• 2017

The vehicle stabilizer link is one of the suspension components that reduces the bumping and rolling during vehicle driving. However, this stabilizer link could be a source of the abnormal noises when its free gaps have higher than normal values. Therefore, the current study aims at investigating the quantitative relationships between the abnormal noises and free gaps of the vehicle stabilizer links, as well as the length of time that the vehicle stabilizer links could be used without generating abnormal noises. In this study, the abnormal noises were measured based on the magnitude of the stabilizer link vibration, while the free gaps were quantified through the force-displacement curves of the stabilizer links. Harsh durability tests were also conducted in order to quantify the operating cycles of the stabilizer links before generating the abnormal noises, along with the concomitant measurements of the free gaps. The current results showed that the abnormal noises of the stabilizer links were detected when its free gaps were larger than 0.12 mm. However, the free gaps of the stabilizer links, which are bigger than 0.1 mm, produced the abnormal noises at 1.5 million cycles under harsh durability test conditions. A parametric study in the future that would reflect the different shapes and sizes of the stabilizer links for diverse vehicles could determine more generalized relationships between the abnormal noises and free gaps of the vehicle stabilizer links.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.117-127
• /
• 1982

In order to analyze the role of axial carbon atoms in rotational barrier of ethane, we take the carbonless ethane, as a model, which is made of six hydrogens in coordinates of ethane. The energy of the system is calculated by McWeeny's open-shell restricted Hartree-Foch selfconsistent-field (RHF-SCF) method, and the transition density on the staggered-to-eclipsed rotation is examined. As being expected, the eclipsed form of the model is more stable than the staggered one. Through the transition density comparison of this model and real ethane, it is found that the existence of the axial carbon atoms induces the electronic density to be diluted in the vicinity of protonic sites and to be attracted to the region of carbon atoms or further to C-C bond region as the barrier is traversed. This migration of electronic charge tell us that the barrier to the internal rotation of ethane originates from the fact that the magnitude of electronic energy depression is not large enough to offset the increased nuclear-nuclear repulsion on the staggered-to-eclipsed rotation.

• Journal of The Korean Astronomical Society
• /
• v.48 no.1
• /
• pp.21-55
• /
• 2015

If the Universe is dominated by cold dark matter and dark energy as in the currently popular ${\Lambda}CDM$ cosmology, it is expected that large scale structures form gradually, with galaxy clusters of mass $M{\geq}10^{14}M_{\odot}$ appearing at around 6 Gyrs after the Big Bang (z ~ 1). Here, we report the discovery of 59 massive structures of galaxies with masses greater than a few times $10^{13}M_{\odot}$ at redshifts between z = 0.6 and 4.5 in the Great Observatories Origins Deep Survey fields. The massive structures are identified by running top-hat filters on the two dimensional spatial distribution of magnitude-limited samples of galaxies using a combination of spectroscopic and photometric redshifts. We analyze the Millennium simulation data in a similar way to the analysis of the observational data in order to test the ${\Lambda}CDM$ cosmology. We find that there are too many massive structures (M > $7{\times}10^{13}M_{\odot}$) observed at z > 2 in comparison with the simulation predictions by a factor of a few, giving a probability of < 1/2500 of the observed data being consistent with the simulation. Our result suggests that massive structures have emerged early, but the reason for the discrepancy with the simulation is unclear. It could be due to the limitation of the simulation such as the lack of key, unrecognized ingredients (strong non-Gaussianity or other baryonic physics), or simply a difficulty in the halo mass estimation from observation, or a fundamental problem of the ${\Lambda}CDM$ cosmology. On the other hand, the over-abundance of massive structures at high redshifts does not favor heavy neutrino mass of ~ 0.3 eV or larger, as heavy neutrinos make the discrepancy between the observation and the simulation more pronounced by a factor of 3 or more.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.4 s.40
• /
• pp.333-342
• /
• 1992

The purpose of this study is to estimate the minimum optimal scale(MOS) of the self-employed health insurance associations. Considering the high proportion of operating expenses, the author have selected 254 regional health insurance associations eon the 1990 Finance Report of the self-employed health insurance programs. Both a quadratic function and a hyperbolic function were chosen for the analysis. The dependent variables are the average maintenance cost per insured person and per household, and the independent variables are the number of insured members and of household The minimum optimal scale was obtained from the differentiation of the quadratic function. Major findings are summarized as follows: 1. The M.O.S. was calculated as 166,174 members (27,442 households) for the rural self-employed health insurance associations and 258,462 members (75,446 households) for the urban. Providing that both the rural and urban health insurance associations would be integrated, the M.O.S. be found to become 231,687 members (68,101 households) 2. Compared with the optimal minimum scale, the magnitude of the current health insurance association found to be much smaller, less than half of the optimal scale. 3. In order to reduce the operating cost, it is necessary to enlarge the operational scale of self-employed health insurance associations.

• Structural Engineering and Mechanics
• /
• v.9 no.3
• /
• pp.241-256
• /
• 2000

The major sources of energy dissipation in steel frames with partially restrained (PR) connections are evaluated. Available experimental results are used to verify the mathematical model used in this study. The verified model is then used to quantify the energy dissipation in PR connections due to hysteretic behavior, due to viscous damping and at plastic hinges if they are formed. Observations are made for two load conditions: a sinusoidal load applied at the top of the frame, and a sinusoidal ground acceleration applied at the base of the frame representing a seismic loading condition. This analytical study confirms the general behavior, observed during experimental investigations, that PR connections reduce the overall stiffness of frames, but add a major source of energy dissipation. As the connections become stiffer, the contribution of PR connections in dissipating energy becomes less significant. A connection with a T ratio (representing its stiffness) of at least 0.9 should not be considered as fully restrained as is commonly assumed, since the energy dissipation characteristics are different. The flexibility of PR connections alters the fundamental frequency of the frame. Depending on the situation, it may bring the frame closer to or further from the resonance condition. If the frame approaches the resonance condition, the effect of damping is expected to be very important. However, if the frame moves away from the resonance condition, the energy dissipation at the PR connections is expected to be significant with an increase in the deformation of the frame, particularly for low damping values. For low damping values, the dissipation of energy at plastic hinges is comparable to that due to viscous damping, and increases as the frame approaches failure. For the range of parameters considered in this study, the energy dissipations at the PR connections and at the plastic hinges are of the same order of magnitude. The study quantitatively confirms the general observations made in experimental investigations for steel frames with PR connections; however, proper consideration of the stiffness of PR connections and other dynamic properties is essential in predicting the dynamic behavior.

• Current Photovoltaic Research
• /
• v.1 no.2
• /
• pp.103-108
• /
• 2013

Epitaxial growth of a high-quality thin Si film is essential for the application to low-cost thin-film Si solar cells. A polycrystalline Si film was grown on a $SiO_2$ substrate at $450^{\circ}C$ by a Al-assisted crystal growth process. For the purpose, a thin Al layer was deposited on the $SiO_2$ substrate for Al-assisted crystal growth. However, the epitaxial growth of Si film resulted in a rough surface with humps. Then, we introduced a thin amorphous Si seed layer on the Al film to minimize the initial roughness of Si film. With the help of the Si seed layer, the surface of the epitaxial Si film was smooth and the crystallinity of the Si film was much improved. The grain size of the $1.5-{\mu}m$-thick Si film was as large as 1 mm. The Al content in the Si film was 3.7% and the hole concentration was estimated to be $3{\times}10^{17}/cm^3$, which was one order of magnitude higher than desirable value for Si base layer. The results suggest that Al-doped Si layer could be use as a seed layer for additional epitaxial growth of intrinsic or boron-doped Si layer because the Al-doped Si layer has large grains.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.98-100
• /
• 2007

Tropical forests have variety of biodiversity values, which provide invaluable services to the living being on earth. In the recent years, tropical forests are regarded as valuable global resources that act as sink for carbon dioxide in order to mitigate global climatic change. In many parts of the world, tropical forests are being rapidly cleared by various means. Soil organic carbon (SOC) is concentrated in the upper 12 inches of the soil. So it is readily depleted owing to the degradation activities. In the present study, it was aimed to assess the magnitude of disturbance in the availability of SOC in a semi- evergreen forest, situated in the Eastern Ghats of Tamil Nadu, India. The forest density of this region was mapped with QuickBird satellite data. Intensive field soil sampling and floristic study were conducted to estimate the SOC status in different density classes and to identify the species availability. The SOC density ranged from 274.06 t/ha to 147.84 t/ha in the very dense and degraded semi-evergreen forest respectively. The SOC content was also varied from 3.70 to 1.83 % in the very dense semi-evergreen and medium semi-evergreen forests respectively. The species composition in different density classes was also varied considerably. As a result of this study, it was identified that the disturbance to forests by various means not only affect the density of forests but also affect the below ground SOC status proportionately.

• Molecules and Cells
• /
• v.26 no.1
• /
• pp.41-47
• /
• 2008

Mitogen-activated protein kinase (MAPK) signaling is a crucial component of eukaryotic cells; it plays an important role in responses to extracelluar stimuli and in the regulation of various cellular activities. The signaling cascade is evolutionarily conserved in the eukaryotic kingdom from yeast to human. In response to a variety of extracellular signals, MAPK activity is known to be regulated via phosphorylation of a conserved $T{\times}Y$ motif at the activation loop in which both threonine and tyrosine residues are phosphorylated by the upstream kinase. However, the mechanism by which both residues are phosphorylated continues to remain elusive. In the budding yeast, Saccharomyces cerevisiae, Fus3 MAPK is involved in the mating signaling pathway. In order to elucidate the functional mechanism of MAPK activation, we quantitatively profiled phosphorylation of the $T{\times}Y$ motif in Fus3 using mass spectrometry (MS). We used synthetic heavy stable isotope-labeled phosphopeptides and nonphosphopeptides corresponding to the proteolytic $T{\times}Y$ motif of Fus3 and accompanying data-dependent tandem MS to quantitatively monitor dynamic changes in the phosphorylation events of MAPK. Phosphospecific immunoblotting and the MS data suggested that the tyrosine residue is dynamically phosphorylated upon stimulation and that this leads to dual phosphorylation. In contrast, the magnitude of threonine phosphorylation did not change significantly. However, the absence of a threonine residue leads to hyperphosphorylation of the tyrosine residue in the unstimulated condition, suggesting that the threonine residue contributes to the control of signaling noise.