• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.10-16
• /
• 2005

This paper suggested the sulfur lamp power supply using Fuzzy Gain Scheduling(FGS), which was designed and confirmed the performance through manufacturing. it was based on Series Resonant Half Bridge Inverter(SRHBI), so that was applied Pulse Frequency Modulation(PFM), Zero Voltage Switching(ZVS), soft switching and soft start for input power variation and output power compensation. In order to get the lengthened life time of magnetron and stabilized output or power, power ratter and efficiency were improved by fuzzy gain algorism. It also made it possible to get not the existing foxed output power but continuous variable output power$(900\~1250[W])$. The manufactured power supply showed good results in input power $220[V]{\pm}15[\%]$ with stabilized output of power, luminous efficiency 97[1m/W] and power factor $96[\%]$.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.348-357
• /
• 2007

One of the major issues in recent researches on wireless sensor networks is to reduce energy consumption of sensor nodes operating with limited battery power, in order to lengthen their lifespan. Among the researches, we are interested in the schemes in which a sensor node periodically turns on and off its radio and requires information on the time when its neighbors will wake up (or turn on). Clock synchronization is essential for wakeup scheduling in such schemes. This paper proposes three methods based on the asynchronous averaging algorithm for clock synchronization in sensor nodes which periodically wake up: (1) a fast clock synchronization method during an initial network construction period, (2) a periodic clock synchronization method for saving energy consumption, and (3) a decision method for switching the operation mode of sensor nodes between the two clock synchronization methods. Through simulation, we analyze maximum clock difference and the number of messages required for clock synchronization.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.405-412
• /
• 2006

Real-time operating systems have been used in various computing environments, where a job must be completed in its deadline, with various conditions, such as effective scheduling policies, the minimum of an interrupt delay, and the solutions of priority inversion problems, that should be perfectly satisfied to design and develop optimal real-time operating systems. Up to now, in order to solve priority inversion problems among several those conditions. There have been two representative protocols: basic priority inheritance protocol and priority ceiling emulation protocol. However, these protocols cannot solve complicated priority inversion problems. In this paper, we design a protocol, called recursive priority inheritance (RPI), protocol that effectively solves the complicated priority inversion problems. Our proposed protocol is also implemented in the Linux kernel and is compared with other existing protocols in the aspect of qualitative analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.88-96
• /
• 2011

Schedule control is an exceedingly fundamental and important construction business function. Even though enormous research efforts have been exerted in this area, there has been no comprehensive and quantitative study exploring detailed cost control practice of construction companies in terms of practical patterns and trends. In this context, this paper surveyed the patterns and trends of schedule control practice of Korean general contractors. Schedule control process as compared to schedule reduction is focused in this paper. The variables for practical schedule control process were identified first. A survey questionnaire was then developed and used in order to collect data from Korean general contractors. Survey results analyzing responses from 45 companies show that scheduling processes in practice have been significantly enhanced in terms of software tools, manuals, and capabilities of engineers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.7
• /
• pp.231-240
• /
• 2014

Video transcoding techniques provide an efficient mechanism to make a video content adaptive to the capabilities of a variety of clients. However, it is hard to provide an appropriate quality-of-service(QoS) to the clients owing to heavy workload on transcoding operations. In light of this fact, this paper presents the dual transcoding method in order to guarantee QoS in streaming services by maximizing resource usage in a transcoding server equipped with both CPU and GPU computing units. The CPU and GPU computing units have different architectural features. The proposed method speculates workload of incoming transcoding requests and then schedules the requests either to the CPU or GPU accordingly. From performance evaluation, the proposed dual transcoding method achieved a speedup of 1.84 compared with traditional transcoding approach.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.232-239
• /
• 2011

This paper investigates the user selection problem of successive zero-forcing precoded multiuser multiple-input multiple-output (MU-MIMO) downlink systems, in which the base station and mobile receivers are equipped with multiple antennas. Assuming full knowledge of the channel state information at the transmitter, dirty paper coding (DPC) is an optimal precoding strategy, but practical implementation is difficult because of its excessive complexity. As a suboptimal DPC solution, successive zero-forcing DPC (SZF-DPC) was recently proposed; it employs partial interference cancellation at the transmitter with dirty paper encoding. Because of a dimensionality constraint, the base station may select a subset of users to serve in order to maximize the total throughput. The exhaustive search algorithm is optimal; however, its computational complexity is prohibitive. In this paper, we develop two low-complexity user scheduling algorithms to maximize the sum rate capacity of MU-MIMO systems with SZF-DPC. Both algorithms add one user at a time. The first algorithm selects the user with the maximum product of the maximum column norm and maximum eigenvalue. The second algorithm selects the user with the maximum product of the minimum column norm and minimum eigenvalue. Simulation results demonstrate that the second algorithm achieves a performance similar to that of a previously proposed capacity-based selection algorithm at a high signal-to-noise (SNR), and the first algorithm achieves performance very similar to that of a capacity-based algorithm at a low SNR, but both do so with much lower complexity.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.892-901
• /
• 2016

In the multi-user multiple-input multiple-output (MIMO) system, orthogonal random beamforming (ORBF) scheme is proposed to serve multiple users simultaneously in order to achieve the multi-user diversity gain. The opportunistic space-division multiple access system (OSDMA-S) scheme performs multiple weighting matrices during the training phase and chooses the best weighting matrix to be used to broadcast data during the transmitting phase. The OSDMA-S scheme works better than the original ORBF by decreasing the inter-user interference during the transmitting phase. To save more time in the training phase, a partly random multiple weighting matrices selection scheme is proposed in this paper. In our proposed scheme, the Base Station does not need to use several unitary matrices to broadcast pilot symbol. Actually, only one broadcasting operation is needed. Each subscriber generates several virtual equivalent channels with a set of pre-saved unitary matrices and the channel status information gained from the broadcasting operation. The signal-to-interference and noise ratio (SINR) of each beam in each virtual equivalent channel is calculated and fed back to the base station for the weighting matrix selection and multi-user scheduling. According to the theoretical analysis, the proposed scheme relatively expands the transmitting phase and reduces the interactive complexity between the Base Station and subscribers. The asymptotic analysis and the simulation results show that the proposed scheme improves the throughput performance of the multi-user MIMO system.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.161-172
• /
• 2007

Vehicles transporting hazardous materials can make huge damage to people, properties and environment by traffic accidents. Therefore, transporting hazardous materials is a big issue with the cutting edge technology of communications in these days. However, despite this situation, Korean government gives limited efforts for systematic management, research and investment about hazardous materials. Accordingly, this research suggests the key path finding algorithm about management of real-time schedule and routes for vehicles transporting hazardous materials. Besides, the case study is progressed in transportation networks of Seoul in order to evaluate the reality of algorithm. Specifically, time-space network transformation is performed for time window attributes. In addition, this study proposes the techniques searching for non-dominated paths considering schedule by the multiobjective shortest path algorithm based on dynamic programming in dynamic transportation networks including multiobjective attributes.

• Journal of Engineering Education Research
• /
• v.16 no.1
• /
• pp.3-14
• /
• 2013

The previously developed practical inquiry activity supporting tools, deduced from the design principles and implementation principles based on the study of precedent researches and theories, applicable to conceptual learning in engineering education were implemented to an on-line learning community, a web-based Windows application, to find out its effectiveness in actual classroom situation through experimental research. The On-line learning community includes the inquiry activity menu to implement learning procedure of inquiry based conceptual learning, the functions supporting the communication among participants, the information sharing function, the scheduling function of class and inquiry activity, the mentoring function, and the evaluation of on-line activities of learners. Experimental study were also conducted in order to analyze the effects of inquiry activity supporting tools on inquiry based conceptual learning in engineering education.