• The Journal of Korean Association of Computer Education
• /
• v.11 no.3
• /
• pp.81-89
• /
• 2008

The failure occurrence of resources in the grid computing is higher than in a tradition parallel computing. Since the failure of resources affects job execution fatally, fault tolerance service is essential in computational grids. And grid services are often expected to meet some minimum levels of quality of service (QoS) for desirable operation. However Globus toolkit does not provide fault tolerance service that supports fault detection service and management service and satisfies QoS requirement. Thus this paper proposes fault tolerance service to satisfy QoS requirement in computational grids. In order to provide fault tolerance service and satisfy QoS requirements, we expand the definition of failure, such as process failure, processor failure, and network failure. And we propose resource scheduling service, fault detection service and fault management service and show implement and experiment results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.264-273
• /
• 2009

For IEEE 802.15.3 HR-WPAN, we propose the DABL algorithm that PNC can allocate the channel times to the DEV in super frame in order that system frame throughput is increased and the delay is decreased. In detail, the DABL algorithm allows to dynamically allocate channel time as well as to adaptively apply the modulation and coding scheme based on the link quality of the DEV. In addition, due to the facts that QoS is quite different depending on service types, we provide the DABL algorithm taking into account RT(Real Time) traffic and Non-RT traffic respectively. Finally, we show simulation results of the DABL algorithm compared to the conventional algorithm that the PNC equally allocates channel times to the DEV regardless of the link quality of the DEV.

• Korea Journal of Hospital Management
• /
• v.23 no.3
• /
• pp.87-103
• /
• 2018

Purpose: This study investigates the best appointment pattern which can enhance customer's satisfaction and hospital's efficient management reflecting plastic surgery clinic's service characteristics. Methodology: The data of this study is obtained from Plastic surgery Clinic which is located in the civic center. By collecting and analyzing the data, we build the simulation model using ARENA. Based on 5 appointment patterns that was suggested in formal appointment scheduling studies, we experiment 3 simulation models; 'Basic Appointment Pattern' that has no restriction, 'Restriction on Second Customer' that restricts the number of second customer's in each slot, 'Restriction on Process Time' that restricts the number of second customer who has long process time in each slot. We can check robustness of the appointment patterns by experimenting on off-peak day and peak day, during peak season. Findings: This study confirms that these 2 restrictions can give a better result than 'Basic Appointment Pattern' that just simply distributes customers by number. Especially, the performance of Triangle-like pattern which is the best appointment pattern in the formal study has been improved by adding restrictions. Based on 'DET', 'Restriction on Second Customer' shows a better result. Meanwhile, based on 'E(WT)', 'Restriction on Process Time' shows a better result. Overall, based on 'DET+E(WT)', 'Restriction on Second Customer' shows a better result. Practical Implications: The purpose of each hospital may alter as demand for plastic surgery grows increasingly. Thus, each hospital should be always prepared to introduce appointment pattern for changed purpose. In order to respond flexibly to these changes, it is necessary for medical personnel to improve the awareness or for hospital to create an environment by constructing appointment program so that medical personnel does not need to put more labor on work.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.31-41
• /
• 2011

Since the cases of time extension have continuously transpired in the public construction project, the potential of economical loss and claims is increasing because the concerned parties such as an owner or a contractor have not properly performed their own responsibility for time extension. One of the main reasons is that the present planning and scheduling do not support the method to apportion the proper responsibility to the right party. This problem has repeatedly led to time extension and made it difficult for the concerned parties to perform the responsibility for time extension. In order to overcome this problem, a framework of delay administration is required as the method to apportion the proper responsibility to the right party. To solve this problem, this paper aimed to develop the conceptual model and prototype system as the practical method to administrate delay causation. Furthermore, the verification result for the reliability and applicability throughout the case studies on real construction projects shows that the conceptual model and prototype system developed would help efficiently to administrate the delay causation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.971-976
• /
• 2014

In this paper, we proposed a low power algorithm using state transition ready method. The proposed algorithm defined a sleep state, a idle state and a run state for the task. A state transition occurring at the time due to the delay time created in order to reduce the power consumption state in the middle of each inserted into the ready state. The ready state considering a power consumption and a delay time in state transition. A scheduling step of performing the steps in excess of the increasing problems have the delay time is long. The power consumption increased for the operation step increase. A state transition from a sleep state with the longest delay time in operating state occurs when the state is switched by the time delay caused by the increase in operating time reduces the overall power consumption reduced. Experiments [6] were compared with the results of the power consumption. The experimental results [6] is reduced power consumption than the efficiency of the algorithm has been demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.1-12
• /
• 2005

In wireless personal area networks(PANs), the successful design of channel time allocation algorithm is a key factor in guaranteeing the various quality of service(QoS) requirements for the stringent real-time constraints of multimedia services. In this paper we propose a dynamic channel time allocation algerian for providing delay guarantees to multimedia traffics such as MPEG streams in the IEEE 802.15.3 high-rate WPANs. The dynamic algorithm exploits the characteristics of MPEG stream, wherein the devices (DEVs) send their channel time requests only at the end of superframe boundaries. The algerian uses mini packets for feedback control in order to deliver dynamic parameters for channel time requests from the DEVs to the piconet coordinator (PNC). In this scheme, the duration of channel time allocated to a DEV during a superframe is changed dynamically depending on the MPEG frame type, traffic load and delay bound of the frame, etc. Performance of the proposed scheme is investigated by simulation. Our results show that compared to traditional scheme, the proposed scheme is very effective and has high performance while guaranteeing the delay bound.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.41-48
• /
• 2012

A Vehicular Ad-hoc Network (VANET) is a vehicular specific type of a mobile ad-hoc network, to provide temporary communications among nearby vehicles. Mobile node of VANET consumes energy and resource with participating in the member of network. In a VANET, data replication and cooperative caching have been used as promising solutions to improve system performance. Existing cooperative caching scheme in a VANET mostly focuses on weak consistency is not always satisfactory. In this paper, we propose an efficient cache management scheme to maintain strong data consistency in a VANET. We make an adaptive scheduling scheme to broadcast Invalidation Report (IR) in order to reduce query delay and communication overhead to maintain strong data consistency. The simulation result shows that our proposed method has a strength in terms of query delay and communication overhead.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.39-45
• /
• 2008

High-Rate Wireless Personal Area Networks (HR-WPANs) in IEEE 802.15.3 standard use a TIme Devision Multiple Access (TDMA) protocol to support isochronous traffic. Isochronous traffic requires a delay-bounded service. However, the HR-WPAN standard suffers from long access delay and association delay. In this paper, we propose an enhanced MAC protocol for the delay-bounded traffic. This proposed protocol provides a way that a central node is able to collect traffic status on all member nodes. Furthermore, by utilizing the information, a scheduling algorithm is also proposed in order to synchronize the instant of a packet transmission with that of the packet arrival. With the proposed protocol and algorithm, the delay of access and association can be reduced. Performance analysis is carried out and the significant performance enhancement is observed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.10-16
• /
• 2005

This paper suggested the sulfur lamp power supply using Fuzzy Gain Scheduling(FGS), which was designed and confirmed the performance through manufacturing. it was based on Series Resonant Half Bridge Inverter(SRHBI), so that was applied Pulse Frequency Modulation(PFM), Zero Voltage Switching(ZVS), soft switching and soft start for input power variation and output power compensation. In order to get the lengthened life time of magnetron and stabilized output or power, power ratter and efficiency were improved by fuzzy gain algorism. It also made it possible to get not the existing foxed output power but continuous variable output power$(900\~1250[W])$. The manufactured power supply showed good results in input power $220[V]{\pm}15[\%]$ with stabilized output of power, luminous efficiency 97[1m/W] and power factor $96[\%]$.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.348-357
• /
• 2007

One of the major issues in recent researches on wireless sensor networks is to reduce energy consumption of sensor nodes operating with limited battery power, in order to lengthen their lifespan. Among the researches, we are interested in the schemes in which a sensor node periodically turns on and off its radio and requires information on the time when its neighbors will wake up (or turn on). Clock synchronization is essential for wakeup scheduling in such schemes. This paper proposes three methods based on the asynchronous averaging algorithm for clock synchronization in sensor nodes which periodically wake up: (1) a fast clock synchronization method during an initial network construction period, (2) a periodic clock synchronization method for saving energy consumption, and (3) a decision method for switching the operation mode of sensor nodes between the two clock synchronization methods. Through simulation, we analyze maximum clock difference and the number of messages required for clock synchronization.