• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.153-165
• /
• 1996

This paper presents an order releasing algorithm for an AMS. Order release policy determine order releasing time to shop floor so as to improve order management and shop performance. The proposed order releasing algorithm can cope with the dynamic environment of orders(e.g. change or cancel of order) flexibly and fastly, by processing individual order and exchanging the information(e.g. compeletion time or lateness of order, etc) with customer. And the objective of the order releasing algorithm is the observance of the due-date, therefore, it can provide customer with a reliability of order. Computer simulation is used to obtain the makespan of order which is the input data of the order releasing algorithm. The eight candidate part dispatching rules are simulated to selected an effective part dispatching rule for the computer simulation. By using the best effective part dispatching rule, the computer simulation is conducted to determine order releasing time.

• Industrial Engineering and Management Systems
• /
• 제2권1호
• /
• pp.9-27
• /
• 2003

In a wafer fabrication factory, the completion time of an order is affected by many factors related to the specifics of the order and the status of the system, so is difficult to predict precisely. The level of influence of each factor on the order completion time may also depend on the production system characteristics, such as the rules for releasing and dispatching. This paper presents a method to identify those factors that significantly impact upon the order completion time under various combinations of scheduling rules. Computer simulations and statistical analyses were used to develop effective due date assignment models for improving the due date related performances. The first step of this research was to select the releasing and dispatching rules from those that were cited so frequently in related wafer fabrication factory researches. Simulation and statistical analyses were combined to identify the critical factors for predicting order completion time under various combinations of scheduling rules. In each combination of scheduling rules, two efficient due date assignment models were established by using the regression method for accurately predicting the order due date. Two due date assignment models, called the significant factor prediction model (SFM) and the key factor prediction model (KFM), are proposed to empirically compare the due date assignment rules widely used in practice. The simulation results indicate that SFM and KFM are superior to the other due date assignment rules. The releasing rule, dispatching rule and due date assignment rule have significant impacts on the due date related performances, with larger improvements coming from due date assignment and dispatching rules than from releasing rules.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.483-488
• /
• 2010

Since 2000 fry releasing programs in Korea have significantly expanded in order to support the commercial fishing industry through recruitment enhancement of targeted species. Here we investigate the economic effectiveness of the Olive flounder (Paralichthys olivaceus) fry releasing program in Korean waters. The market survey method was used in our analyses. Results show that the B/C ratio, as an indicator of economic evaluation, is 2.56 in the East Sea region, 9.45 in the South Sea region, and 1.34 in the West Sea region, which indicates that the fry releasing program is economically feasible but the economic effectiveness varies from region to region.

• 경영과학
• /
• 제29권3호
• /
• pp.157-168
• /
• 2012

In this study, we consider an order promising problem at parallel machine shops where orders arrive dynamically. We develop methods for the problem, which instantly quote the due-dates of arrived orders. In this study, we first propose methods which can estimate flow times of orders, in which the current and future inventory status as well as the specific scheduling scheme used in the shop are taken into account, and then the due-dates are set by the order promising methods using the estimation results. The quoted due-dates of orders are compared with the actual completion times of those which are obtained from the simulation runs. The series of computational experiments show that the superior performance of the proposed methods in terms of the accuracy of due-date quotation.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.251-259
• /
• 2002

부재의 일정구간에 설치된 긴장재의 긴장작업과 이미 긴장되어 있는 상태의 긴장재를 이완시키므로써 의도적으로 유도되는 2차 모멘트를 이용한 새로운 연속화 공법이 개발되었다. 본 공법에서는 이들 긴장재의 긴장과 이완공정이 가장 핵심이 되는 작업이 되며, 실용적인 측면에서는 그 크기와 순서를 결정하는 것이 주된 과제가 될 것이다. 본 논문에서는 이 과정에서 필요한 최적의 긴장과 이완 비율의 조절 과정에 관하여 연구하였다. 그 결과, 긴장작업과 이완작업은 먼저 긴장작업부터 시작하여 3단계에 걸쳐 점진적으로 실시하는 것이 구조의 안전과 시공성을 위해 타당한 방법으로 나타났다. 그리고, 민감도 분석을 통하여 결정되는 선행 긴장작업의 긴장력 크기는 최소와 최대의 비율범위를 동시에 만족하는 값으로 결정되어야 하나, 시공의 효율성을 위해서 필요할 패는 최소 긴장비율만을 하한치로 하여 결정하여도 큰 문제는 없다.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.763-770
• /
• 2018

Bioremediation in situ is heavily dependent on the oxygenic environment which would privide the dwelling microorganism with sufficient oxygen. The situation could be easily resolved with supply of an Oxygen Releasing Compound (ORC). In this paper we prepared that sort of material out of oyster shell powder (mostly calcium carbonate) that prevails every shore areas of the country. We used two different oxidizing methods in the first step of the whole manufacturing process-conventional heating in a furnace and an ultrasound generator to obtain calcium oxide. Then that calcium oxide was further oxidized into calcium peroxide which may release oxygen under a moisturized condition. The oxygen releasing experiments were run to test the performance of our products, and to determine the gas kinetics during the experiments. Interestingly, calcium peroxide derived from ultrasound treatment was much more energy-effective as ORC than that from furnace heating although the heat derived process was better than that of ultrasound in terms of oxygen content and its releasing rate. We also found that most of the data collected from the gas releasing experiments fairly supported an ordinary $1^{st}$ order kinetics to oxygen concentration, which shaped a sharp discharge of oxygen at the very early moment of each test.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.27-40
• /
• 2004

The purpose of this study was to provide basic data for improving athletic performances by analyzing the kinematic variables of the Double Backward Somersault on the Parallel Bars through the 3D motion analysis. The subjects in this study were 5 male gymnasts who were ranked as national athletes. The results are as follows. 1. A total time(Mean Time) of performance showed $2.72{\pm}0.82\;sec$. and flight time to landing after releasing was 0.87sec.(mean). In order to perform better stable flying movement, the flight time should be increased. 2. In the change of velocity of the center of mass, when the increasing ascension velocity of the upper point was high, the position in the top point was high on releasing. 3. In the position variable of the center of mass, the mean of upper-bottom position in horizontal posture was $242.1{\pm}6.5cm$, $232.8{\pm}6.4cm$ in releasing, and $265.0{\pm}5.6cm$ in the highest point. This result is explained that the position of center of mass can be raised by using elastic power when wrist raised the bar in the releasing movement. 4. The angle of shoulder joint was $271.1{\pm}14.0$. Such a big angle influences a negative effect on the releasing velocity, because trunk is not a position in the enough vertical direction. 5. The ankle of hip joint in hand-standing was $191.1{\pm}5.9$, $118.8{\pm}5.3$ in releasing, and $122.3{\pm}5.3$ in taking on. Therefore, the result suggests that trunk should be straightly raised in taking on.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.136-146
• /
• 1992

Most of scheduling papers on FMS have been considered that the fabrication process, the machining process and the assembly process etc. are independent and the releasing, routing, dependent, batching, loading problem are treated separetely. In this paper, we discuss that the integrated scheduling problem which can be solved for efficient use. We combine two systems that each process system which in order to produce a product is treated dependently, the releasing and the routing problem are combined one system and we present the efficient flexible manufacturing system as including the alternate process.

• 공업화학
• /
• 제7권1호
• /
• pp.59-66
• /
• 1996

양말단에 아미노기가 결합된 일련의 bisamino-PEG($Jeffamine^{(R)}ED$)를 함유한 키토산 비드들을 알칼리 용액을 사용한 capillary extrusion method에 의해 제조하였다. 제조된 각각의 비드들에 대한 swelling kinetics를 조사한 결과, 키토산비드 내부에 PEG 사슬이 길어질수록 팽윤이 늦게 진행되었다. 또한 키토산 비드에 함유된 bisamino-PEG들의 방출현상을 정량적으로 알아 보기 위해 양말단의 1차 아민기에 fluorescamine을 결합시킨 후, UV spectra로 방출과정을 추적하였다. 실험결과 키토산 비드 내부에 있는 PEG 사슬이 길수록 방출시간은 $Jeffamine^{(R)}ED$-600 < $Jeffamine^{(R)}ED$-900 < $Jeffamine^{(R)}ED$-2001 순으로 지연되는 경향을 나타내었다. 이는 PEG 사슬이 길어질수록 키토산과의 수소결합에 의한 상호작용이 강화되고 그 결과 방출기간이 지연된 것으로 사료된다.