• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.441-444
• /
• 2005

Our country has experienced variations in temperature as belong to the area of the continental climate that shows four significant seasons. These occur immense difficulty on the period, cost, quality of construction. As the hydration of cement processes, the strength of concrete is developed. In order to improve the quality of concrete, various conditions including temperature and humidity should be maintained appropriately and concrete itself should be cured sufficiently. In the early age, the strength of concrete is developed remarkably. However, the hydration is accelerated too much in high temperature or delayed too much in low temperature, so the quality can be changed and It can fail to get the objective strength. This paper aims to offer the data, necessary to the quality control handbook.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_3호
• /
• pp.97-106
• /
• 2001

To improve the water quality, particularly for sea bathers, the behaviour of wastewater from sewage outfalls in water adjacent to Swansea, UK, was studied using a mathematical model. The water quality in the sewage receiving basin was determined using factors like the outfall diffuser location(distance from land boundary), sewage treatment scheme, discharge time, and bacteria decay rate, etc. With respect to these factors, an optimal strategy for sewage discharge was then investigated to minimize bacteria levels along the bathing beaches. As water quality criteria, predicted faecal coliform levels were monitored along the coast adjacent to the outfall locations. The resultant values were compared with EC Mandatory(<2000, 95 % of 20 samples) and Guideline Standards(< 100, 80 % of 20 samples). For the advective-diffusion equation, the non linear advective terms were represented using the ULTIMATE algorithm and the third-order accurate QUICKEST scheme to avoid numerical diffusion. Details of the simulation results are then presented as an optimal policy for sewage discharge in the region.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.771-778
• /
• 2010

The prediction of discharge is very important in water resources management and plan. In this study, we have analyzed discharge data of site at up and down stream in watershed. In order to forecast discharge the regression equations were developed by measuring flow data. Also, to forecast the change of water quality followed by change of inflow the correlation relationship between inflow of the Youngchun site and the Chunhju dam was shown as very high. The forecast of inflow at the Chungju dam would be possible through flow analysis of the Youngchun site. And, it is possible to forecast water quality by flow analysis because the correlation relationship of SS and turbidity followed by change of flow for each station of investigation was very high.

• 한국농촌생활과학회지
• /
• 제9권1호
• /
• pp.79-95
• /
• 1998

The purpose of this study is to investigate quality of life in farm households. This study examines some related factors which influence the well-being of the family life among the rural housewives, based on the farm management, household management, the satisfaction of the household and the satisfaction of community. Questionnaires were distributed to the 200 housewives residing in Anseong. The 187 data obtained were analyzed by frequency, percentage and mean. Based on the above findings, it has been found that the role od the rural housewives is very important. Because they works not only at home but also in work. The satisfaction of rural housewives about family living and community is very low. In order to improve work, work course should be mechanized. If greater attentions should be directed to the satisfaction of leisure activities, the quality of family life could be improved and stabilized.

• Journal of Information Technology Applications and Management
• /
• 제17권2호
• /
• pp.155-173
• /
• 2010

Although online education service markets are growing fast, previous studies have been limited to the studies on media types or system qualities of online education. In order to provide timely implications for online education service providers to maintain and increase the number of users, other factors such as interactivity and community perspectives should be considered. In this study, social capital and service quality were adopted as antecedents of learning motivation. Also, service quality dimensions, as well as learning motivation, were chosen to examine its impact on intention to repurchase of online education services. Research findings show that structural and cognitive dimensions of social capital are proved as antecedents of relational capital; structural and relational social capital positively influence on learning motivation; tangibility positively makes impact on learning motivation; and intention to repurchase is positively influenced by responsiveness and learning motivation. Practical implications based on the research findings are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1513-1515
• /
• 2004

This paper describe the power quality monitoring results of the grid-connected wind turbine generator in Daegwallyeong Test Site. The power quality monitoring for grid-connected wind turbine generators are important to verify their performance as the grid-connected generators. In order to measure the impacts on the grid of wind turbine generator and evaluate the performance by analyzing electrical parameters, we equipped the power quality monitoring system in the real field of the Daegwallyeong test site. The developed monitoring system gathers information by remote access through the internet. The monitoring results and the detail explanation for the developed wind turbine monitoring system is presented in the study.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.561-566
• /
• 2005

This paper introduces a compression technique for power qualify disturbance signal via discrete wavelet transform(DWT). The proposed approach is based on a previous estimation of the stationary component of power quality disturbance signal, so that it could be subtracted from the original signal in order to reduce a dynamic range of signal and generate transient events signal, which is subsequently applied to the compression technique. The compression techniques is performed through the difference signal decomposition, thresholding of wavelet coefficients, and signal reconstruction. It presents the relation between compression efficiency and threshold. It shouts that the wavelet transform leads to a power quality data compression approach with high compression efficiency, small compression error and good de-nosing effect.

• International Journal of Quality Innovation
• /
• 제3권2호
• /
• pp.57-73
• /
• 2002

Recent interests in total quality management (TQM) and business excellence (BE) had been fuelled with a range of national and regional awards. These awards are being increasingly used by organisations as part of the business improvement process and strategic benchmarking. This paper reviews the concepts and approaches of performance measurement (PM) and discusses the integration of PM with the TQM and BE philosophies. A TQM-BE-PM framework with a set of self-assessment checklists was developed. In order to complement the literature base with empirical evidence, an industry survey was conducted and a trial implementation of the framework was carried out in a leading manufacturing firm in Hong Kong. The self-assessment performance data of the fm was evaluated and then benchmarked with the industry averages obtained from the survey. This paper presents the empirical findings and discusses the applicability of the framework in measuring and benchmarking organisational performance toward continual improvement.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.1-14
• /
• 2007

The Six Sigma and Lean Production methodologies suggest that creating value for customers is the objective of a production process or an organisation. In the production context, "added value" dominates the discussion about the creation of value to customers. However, "added value" is often only defined conceptually or discussed at a strategic level, and the link between added value and customer value has not yet been well conceptualised. Therefore, the purpose of the paper is to develop a methodology to measure added value in order to complement the existing performance measures in Six Sigma and Lean Production by conceptualising the link between customer value and added value. The conceptual link "confirms" that quality, time, and costs are the elements of added value, which are transformed into a metric to express customer value. The implementation of the metric recommends the adoption of Lean (Six) Sigma and Lean Accounting (Activity Based Costing), which thus implies that "leanness" is an important "feature" of added value.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.63-71
• /
• 2019

Work Guideline of Construction Quality Management was revised in July 2017, and it has changed the perception of scaffolding in South Korea. The on site investigation and survey was performed on manufacturers, leasing companies, and quality inspection agencies regarding the compliance with the guideline for the scaffolding and the related components brought to the site. Moreover, the related guidelines and identified unsatisfactory quality management items were analyzed by each subject. As a result, the major factors that cause the problems were reasonably deducted. The related regulations to prohibit the delivery of faulty scaffolding components to the construction site in order to secure the safety of the temporary structure was suggested.