• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.159-169
• /
• 2017

This study aims to the increasing the reliability of gun firing system of patrol killer guided missile from failure mode analysis. In order to find out the breakdown parameter, the examination process of the sources of the problems and the quality improvement activities are analyzed with performance testing data. From this study, the rate of operation and the reliability of 76 mm naval guns will be increase. And the result of the study is expected to be used as a reference data in the naval gun firing system for another failure mode analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.207-208
• /
• 2003

Increasing interest in indoor air quality (IAQ) control has been found because of its serious effect on human health. To evaluate IAQ, thermal comfort in terms of temperature and velocity distributions of indoor air has to be analyzed in detail. Choice of location for installation of air-conditioner in a building will affect the performance of cooling effect and thermal comfort on the occupants, which in turn will affect the indoor air quality (IAQ) of the building. In this paper, we present a discussion on the proper location of the air-conditioner in order to obtain good thermal comfort for occupant of a typical bedroom in Macao. A set of carefully designed numerical experiments is run with the Computational Fluid Dynamics (CFD) software FLOVENT 3.2 [1]. Reynolds averaged Navier-Stokes equations are solved with finite volume technique and turbulence effects upon the mean flow characteristics is modeled with the k - & model. Assumption of steady state environment is made and only convective and conductive heat transfer from the occupant and air-conditioner are being concerned.

• Journal of Korean Society for Quality Management
• /
• v.8 no.2
• /
• pp.45-58
• /
• 1980

The relationship between the subcontractor and the subcontractor in current industries, especially in the machine manufacturing industry, should be developed to the "Efficient Q-C-D System" in which the three elements of consideration-Quality, Cost and Delivery condition, are in a state of equillibrium. From this point of view the two parts of a subcontract must cooperate in the whole activity: ranging from the initial products planning, through the manufacturing process, to the final usage by customers. In this report, we tried to present Korean machine manufacturing industry with the model of management system of subcontracts in order that machine manufacturers may assure the quality, reduce the production cost and enhance the productivity with the model.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.53-61
• /
• 2000

On the laser weld production line, a slight alteration of the welding condition produces many defects. The defects are monitored in real time, in order to prevent continuous occurrence of defects, reduce the loss of material, and guarantee good quality. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in CO$_2$ laser welding. For high speed CO$_2$ laser welding, laser tailored welded blanks for example, on-line weld quality monitoring system was developed by using fuzzy multi-feature pattern recognition. Weld qualities were classified optimal heat input, a little low heat input, low heat input, and focus misalignment, and final weld quality were classified good and bad.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.99-110
• /
• 2016

The quality of building space program is a key to measure how the building performance satisfies its owner and users. However assuring its efficiency requires reliable criteria that reflect high level experience knowledge in the field. This study suggests a plan to gauge the level of building space performance using expert knowledge, which has not been utilized well enough but should play a critical role. In order to setup an expert system measuring level of the space program, we firstly optimized the space areas to the best case in a knowledgebase and use them as criteria to judge the quality of the spaces extracted from BIM model. We found the experimental results show us a promising way of measuring a relative quality of the space programs.

• Journal of Environmental Impact Assessment
• /
• v.23 no.3
• /
• pp.177-186
• /
• 2014

Depending on the change of lifestyle and the improvement of people's living standards and rapid industrialization, urbanization of recent, demand for water is increasing rapidly. So emissions of domestic wastewater and various industrial waste water has increased, and water quality is worsening day by day. Therefore, in order to provide a measure against the occurrence of water pollution accident, this study was tried to simulate water pollution accident. This study simulated 2008 Gimcheon phenol accident using 1,2-D model, and analyze scenario for prevent of water pollution accident. Consequently the developed 1-D model presents high reappearance when compared with 2-D model, and has been able to obtain results in a short simulation run time. This study will contribute to the water pollution incident response prediction system and water quality analysis in the future.

• Journal of radiological science and technology
• /
• v.18 no.1
• /
• pp.71-75
• /
• 1995

In order to establish the photographic effects and sensitivity of various screens, fluorescence meter is used with convenience. When the radiation quality has been fixed the fluorescence has increased in proportion to X-ray dose. However, the response of fluorescence meter has the dependency of X-ray quality in accordance with KVP. as well as the difference of screen and scatter fraction can influence on the response of fluorescence meter. Using accurate fluorescence meter as a radiation detecter and as for a proper supervision the sensitive materials, we have to aware of the meter's dependency of X-ray quality and the scatter fraction.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.977-981
• /
• 2006

In order to improve water quality in drinking water sources, Ministry of Environment (MOE) was implemented total water pollution load management (TWPLM) in all the major river basins. From the experience of the application of TWPLM, we could find some problems relating the target watershed, standard operating procedure (SOP) of establishment and implementation plan, water quality and flow rate, design flow, water quality model, margin of safety (MOS), and estimation of wasteload were found. The authors were reviewed ongoing TWPLM and presented the improvement schemes for a successful TWPLM. For the application of these suggestions, further detailed studies should be done to implement TWPLM in the future.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.53-56
• /
• 2008

Generally, the quality of satellite images is expressed by GSD (Ground Sample Distance), MTF (Modulation Transfer Function) and SNR (Signal to Noise Ratio). However, these factors are technology-oriented and do not explain interpretability of satellite images. We need a standardized index which shows standard of interpretability. In this study, we estimated NIIRS (National Imagery Interpretability Rating Scale) through the GIQE (General Image Quality Equation) which is able to judge image interpretability with the standardized index. Traditionally, NIIRS has been determined manually by specialized image analysts. We used the GIQE in order to reduce inefficiency and high costs cause by manual interpretation and to produce accurate NIIRS. For monitoring image degradation, we estimated GIQE physical parameters from image analysis and carried out time series analysis about the quality of the KOMPSAT-1 images. On all of the tests, we were able to identify the image degradation due to the changing time. This indicates that NIIRS derived from GIQE will be used for image degradation indicator.

• Korean journal of food and cookery science
• /
• v.20 no.3
• /
• pp.292-298
• /
• 2004

This study researched the microbial change of quality according to various phases of product flow of Dongtae-Jeon (a pan-fried dish) and rolled egg in packaged meals. In order to carry out the study, the time required, temperature, water activity and microbial quality were measured at various phases of production flow of Dongtae-Jeon and rolled egg in packaged meals, and the effects of these factors on microbial multiplication was analyzed. According to the phases in product flow of Dongtae-Jeon, it was shown that the time required is 12.5hrs and water activity is distributed 0.932-0.980. These conditions were suitable for microbial multiplication. According to the phases in product flow of rolled egg, it was shown that the time required is 3.3hrs. In addition, qualitative analysis of pathogenic microorganisms (Salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus) detected no such microorganisms in any of the samples.