• 천문학회보
• /
• 제37권2호
• /
• pp.218.2-218.2
• /
• 2012

In the remote sensing researches, the reflected bright source such as snow, cloud have effects on the image quality of wanted signal. Even though those signal from bright source are adjusted in corresponding pixel level with atmospheric correction algorithm or radiometric correction, those can be problem to the nearby signal as one of the stray light source. Especially, in the step and stare observational method which makes one mosaic image with several snap shots, one of target area can affect next to the other snap shot each other. Presented in this paper focused on the stray light analysis from unwanted reflected bright source for geostationary ocean color sensor. The stray light effect for total 16 slot images each other were performed according to 8 band filters. For the realistic simulation, we constructed system modeling with integrated ray tracing technique which realizes the same space time in the remote sensing observation among the Sun, the Earth, and the satellite. Computed stray light effect in the results of paper demonstrates the distinguishable radiance value at the specific time and space.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1313-1321
• /
• 2000

최근 위성을 이용한 고속 멀티미디어 서비스 시대가 도래함에 따라, 저궤도 위성통신에 대한 관심이 증대되고 있다. 이러한 저궤도 위성통신 채널에서 고속 멀티미디어 서비스를 지원하기 위해서는 매우 우수한 성능의 오류정정부호가 요구된다. 1993년 Berrou등에 의해 발표된 터보부호는 Shannon 한계에 근접하는 우수한 성능을 나타냄으로써 현재 활발한 연구가 진행되고 있다. 본 논문에서는 저궤도 위성통신 채널을 모델링하고 이에 의해 발생된 각 지역별 전파환경과 앙각의 변화에 따른 페이딩 특성을 분석한다. 그리고 저궤도 위성통신 채널에서 터보부호의 성능을 시뮬레이션하고 기존의 길쌈부호의 성능과 비교 분석하였다. Globalstar의 궤도 파라미터를 이용하여 모델링한 저궤도 위성통신 채널에서 터보부호는 기존의 길쌈부호와 비교하여 각 전파환경과 앙각의 변화에 대해서 약 1.0~2.2dB의 부호화 이득을 더 얻을 수 있음을 알 수 있었다. 분석된 결과는 각 전파환경별로 앙각의 변화에 따라 나타나는 이득의 차이에 대한 원인과 부호의 종류에 따른 성능을 분석함으로써 향후 시스템별 환경에 따른 부호의 선정에 도움이 될 수 있도록 하였다.

• 한국정보통신학회논문지
• /
• 제25권12호
• /
• pp.1826-1834
• /
• 2021

본 논문에서는 지상의 광학 관측 시스템에서 미지 우주물체를 짧은 주기로 촬영할 때의 연속 추적 가능성을 확인해 본다. 저궤도영역으로 한정된 대상 표적에 대해 모의 관측 데이터를 생성하였고, 표적특성을 고려하여 예측 오차의 성능지수를 설정하였다. 칼만 필터를 이용하여 표적의 다음 위치를 예측하였고, 등속도/등가속도 표적 기동 모델이 미지 우주물체의 방위각/고도각 두 축에 적용되었다. 몬테카를로 시뮬레이션을 수행한 결과, 최대 비선형구간의 최대 오차 비율이 2% 미만으로 나타나 연속적인 추적을 보장할 수 있다고 판단할 수 있었다. 등가속도 모델이 케이스별 예측 오차값의 변화가 적어서, 미지 우주물체의 추적에 더 적합하였다. 이러한 분석은 광학 관측을 이용한 미지 우주물체 궤도 결정의 기초를 제공할 수 있다.

• 동력기계공학회지
• /
• 제16권3호
• /
• pp.22-28
• /
• 2012

Active magnetic bearings(AMBs) present a technology which has many advantages compared to traditional bearing concepts. However, they require backup bearings in order to prevent damages in the event of a system failure. In this study, the dynamics of an AMB supported rotor during impact on backup bearings is studied employing a detailed simulation model. The backup bearings are modeled using an accurate ball bearing model, and the model for a flexible rotor system is described using the finite element approach with the component mode synthesis. Not only the influence of the support stiffness, clearance and friction coefficient on the rotor orbit, but also bearing load are compared for various rotor system parameters. Comparing these results it is shown that the optimum backup bearing system can be applicable for a specific rotor system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.463-467
• /
• 2004

A FTS (Flight Termination System) is a system that resides in a flying object such as a rocket, unmanned airplane, helicopter, missile, etc., receives commands from ground stations or detects coordinates automatically, and accomplishes a destruction command in case the object does not follow the presumed orbit. In this paper, we address the implementation of a communication modem for the FTS modem. We present general theory, simulation results using Matlab, and several results on the implementation using VHDL.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.197-208
• /
• 1998

Ground track manintenance maneuver simulations for the KOMPSAT spacecraft are performed for three and half years. Both longitude targeting and time targeting strate-gies are applied for in-plane maneuvers. The nominal longitude bands of maneuvers for $\pm5km$ and $\pm10km$ are applied for the longitude targeting and the 21-day maneuver time duration is used for the time targeting. Daily solar flux values for the simulation period are derived from the previous solar cycle values. Atmospheric drag formula for the KOMPSAT orbit altitude is derived from Jacchia model using polynomial and sinusoidal curve fitting. Total required delta velocity and proper time between successive maneuvers are estimated during ground track maintenance maneuver simulations.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.27.2-27.2
• /
• 2008

The STSAT-3 satellite was initiated in October 2006 and will be launched into a lower sun-synchronous earth orbit (~700km) in 2010. COMIS takes hyperspectral images of 30m/60m ground sampling distance over a 30km swath width. The payload will be used for environmental monitoring, such as in-land water quality monitoring of Paldang Lake located next to Seoul, the capital of South Korea. An extensive sensitivity and error budget analysis of COMIS optical system have been performed. As way of estimating aggregate effects of all tolerances, a Monte Carlo simulation is used.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.35.1-35.1
• /
• 2008

The importance on the simulation of earth observation optical payloads has been recently emphasized in order to estimate on-orbit imaging performance of the payloads. The estimation should consider all aspects of payload development; design, manufacture, test, assembly, launch and space environment. Until recently several studies have been focused the evaluation of the individual factors rather than the integrated. This paper presents the development of an integrated payload simulator. The simulator analyzes the payload imaging performance based on MTF(Modulation Transfer Function) calculations of the major factors (Diffraction, Aberration, Detector integration, Image motion and etc.) and the simulator can generate realistic artificial earth images as taken by defined earth observation payloads. The simulator is developed for the use of evaluating pre- and post-launch imaging performance and assisting on-board calibration of COMPSAT-3.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1208-1216
• /
• 2014

Mismatch between switching frequency and circuit parameters often occurs in industrial applications, which would lead to instability phenomena. The bifurcation behavior of $V^2$ controlled buck converter is investigated as the pulse width modulation period is varied. Nonlinear behavior is analyzed based on the monodromy matrix of the system. We observed that the stable period-1 orbit was first transformed to the period-2 bifurcation, which subsequently changed to chaos. The mechanism of the series of period-2 bifurcations shows that the characteristic eigenvalue of the monodromy matrix passes through the unit circle along the negative real axis. Resonant parametric perturbation technique has been applied to prevent the onset of instability. Meanwhile, the extended stability region of the converter is obtained. Simulation and experimental prototypes are built, and the corresponding results verify the theoretical analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.59-64
• /
• 1989

In this paper, the launch trajectory of the Japan scientific satellite M-3H-3 from launch to orbit injection is investigated. For the terminal conditions at a guidance target point, a guidance and control system is used. An open-loop and a closed-loop guidance schemes are used simultaneously. For the closed-loop guidance scheme, the velocity polynomial algorithm represented by the velocity difference between the target point and present velocity is used. A PD control system is used for activating gimbal type engines. The simulation result shows that all the terminal position and velocity conditions are satisfied and the trajectory for the M-3H-3 scientific satellite is reasonable.