• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.286-291
• /
• 2023

Perovskite materials are promising candidates for next-generation optoelectronic devices owing to their outstanding external quantum efficiency, high color purity, and ability to tune the light emission wavelength. However, conventional thermal annealing processes caused the degradation of perovskite, resulting in poor optoelectronic properties and a short lifetime. Herein, we propose a laser-induced recrystallization of perovskite thin film to enhance its light-emitting properties. Laser-induced recrystallization process was performed using rapid and instantaneous laser heating, which successfully induced grain growth of the perovskite material. The laser processing conditions were thoroughly optimized based on theoretical calculations and various material analyses such as x-ray diffraction, scanning electron microscope, and photoluminescence spectroscopy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.191.2-191.2
• /
• 2015

Details of carrier dynamics in self-assembled quantum dots (QDs) with a particular attention to nonradiative processes are not only interesting for fundamental physics, but it is also relevant to performance of optoelectronic devices and the exploitation of nanocrystals in practical applications. In general, the possible processes in such systems can be considered as radiative relaxation, carrier transfer between dots of different dimensions, Auger nonradiactive scattering, thermal escape from the dot, and trapping in surface and/or defects states. Authors of recent studies have proposed a mechanism for the carrier dynamics of time-resolved photoluminescence CdTe (a type II-VI QDs) systems. This mechanism involves the activation of phonons mediated by electron-phonon interactions. Confinement of both electrons and holes is strongly dependent on the thermal escape process, which can include multi-longitudinal optical phonon absorption resulting from carriers trapped in QD surface defects. Furthermore, the discrete quantized energies in the QD density of states (1S, 2S, 1P, etc.) arise mainly from ${\delta}$-functions in the QDs, which are related to different orbitals. Multiple discrete transitions between well separated energy states may play a critical role in carrier dynamics at low temperature when the thermal escape processes is not available. The decay time in QD structures slightly increases with temperature due to the redistribution of the QDs into discrete levels. Among II-VI QDs, wide-gap CdZnTe QD structures characterized by large excitonic binding energies are of great interest because of their potential use in optoelectronic devices that operate in the green spectral range. Furthermore, CdZnTe layers have emerged as excellent candidates for possible fabrication of ferroelectric non-volatile flash memory. In this study, we investigated the optical properties of CdZnTe/ZnTe QDs on Si substrate grown using molecular beam epitaxy. Time-resolved and temperature-dependent PL measurements were carried out in order to investigate the temperature-dependent carrier dynamics and the activation energy of CdZnTe/ZnTe QDs on Si substrate.

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.65-71
• /
• 1999

광 패키징에서 광섬유와 광전자소자를 정확히 정렬하기 위한 V-groove의 치수 정밀도에 미치는 마스크 재료와 에칭용액의 영향을 연구하였다. PECVD nitride, LPCVD nitride, thermal oxide($SiO_2$)를 마스크재료로 사용하였고 실리콘을 이방성에칭하는 용액으로 KOH(40wt%)용액과 KOH(40wt%)용액에 IPA를 첨가한 용액을 이용하였다. 마스크재료로는 LPCVD nitride가 가장 좋은 선택적에칭특성을 나타내었으며 사용된 마스크재료 중 thermal oxide가 가장 빠른 속도로 에칭되었다. V-groove의 크기 증가는 마스크충 아래로의 undercutting에 의해 생겼는데 이는 주로 (111)면으로의 에칭 때문이었다. KOH(40wt%)용액에서 (111)면의 에칭속도는 0.034 - 0.037 $\mu\textrm{m}$/min로 마스크재료에 관계없이 거의 일정하였다. IPA를 KOH(40wt%)용액에 첨가하면 (100)면과 (111)면의 에칭속도는 모두 감소하지만 (111)면에 대한 (100)면의 에칭속도비는 증가하였다. 그러므로 이런 용액에서 (111)면으로의 에칭에 의한 undercutting현상은 줄어들었으며 V-groove의 크기를 더 정확하게 조절할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.461-461
• /
• 2013

Over the last decade, zinc oxide (ZnO) thin films have attracted considerable attention owing to large band gap of 3.37 eV and large exciton binding energy of 60 meV at room temperature [1-3]. Recent interest in ZnO related researches has been switched into the fabrication and characterization of low-dimensional nanostructures, such as nano-wires and nano-dots that can be applicable to manufacture the optoelectronic devices such as ultraviolet lasers, light-emitting-diodes and detectors. Since the optical properties of ZnO nano-structures might be distinct from those of bulk materials or thin films, the low-dimensional phenomena should be examined further. In order to utilize such advanced optoelectronic devices, one of the challenges is how to control the surface state related emissions that are drastically increased with increasing the density of the nano-structures and the surface-to-volume ratio. This paper reports the synthesis and characterization of self-assembled ZnO hexagonal nano-disks grown by radio-frequency magnetron sputtering. X-ray diffraction data and scanning electron microscopy data showed that ZnO hexagonal nano-disks were nucleated on top of the flat surfaces as the film thickness reached to 1.56 ${\mu}m$ and then the number of nano-disks increased with increasing the film thickness. The lateral size of hexagonal nano-disks was ~720 nm and height was ~74 nm. The strong photo luminescence spectra obtained at 10 K was also observed, which was assigned to a surface exciton emission at 3.3628 eV arising from the surface sites of hexagonal nano-disks.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.938-944
• /
• 2008

고분자 분산형 액정 표시 소자(PDLC)에 사용되는 pre-polymer인 PN393에 다량으로 함유된 반응성 모노머 2-ethylhexyl acrylate(EHA)를 비닐에테르 계열의 모노머인 butanediol vinyl ether(BDVE)로 대체하여 제작된 PDLC 셀의 전기 광학적 특성 변화를 알아보았다. BDVE 함량 30 wt%까지는 액정방울의 크기가 작아졌으나, 그 이상의 조성(40 wt%)인 경우, 더 이상의 액정방울크기 변화는 관찰되지 않았다. 명암비, 응답속도는 상용화된 PN393를 적용한 경우보다 각각 490%, 15%로 성능이 향상되었으나, 동작전압은 약 60% 증가하는 것으로 확인되었다. 전기광학적 특성 변화를 $0{\sim}60^{\circ}C$ 온도범위에서 관찰한 결과, 응답속도와 동작전압의 온도안정성은 향상되었으나, 명암비 성능은 온도증가에 따라 열화되는 것으로 확인되었다.

• 접착 및 계면
• /
• 제23권2호
• /
• pp.39-43
• /
• 2022

디스플레이, 태양전지와 같이 전기를 빛으로, 또는 빛을 전기로 변환시켜주는 광전자소자는 효율 향상을 위하여 빛의 거동 제어가 매우 중요하다. 즉, OLED의 경우 내부 빛 제어를 통해 더 많은 빛이 외부로 나갈 수 있도록 유도해 줄 때 발광효율을 향상시킬 수 있으며, 외부 빛 제어를 통해 광흡수층에서의 광경로를 증대시킬 경우 태양전지의 에너지 변환효율을 증가시킬 수 있다. 본 연구에서는 이러한 광거동 제어가 가능한 구조로서 주름구조에 대한 연구를 진행하였으며 응력 해소 시간을 제어하여 구조의 주기와 높이를 독립적으로 제어하고자 하였다. 주기와 높이의 변화가 광거동에 어떠한 영향을 미치는지 살펴보기 위하여 일정한 주기에서 높이 변화 및 유사한 높이에서 주기 변화에 따른 자외선/가시광선 분광분석(UV/Vis spectroscopy)을 실시하였으며 구조의 종횡비가 클수록 직진광의 비율이 낮고 분산광의 비율이 높음을 확인하였다. 이를 통해 광경로 변화 및 광경로 증가를 위하여 큰 종횡비의 주름구조가 요구됨을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제40권5호
• /
• pp.1116-1125
• /
• 2023

산화아연 막은 투명한 전도성 물질로써 다양한 분야의 광전자소자에 이용되고 있다. 그러므로 산화아연 막의 특성을 규명하는 것은 광전자소자의 성능을 높이는데 매우 중요한 역할을 할 것이다. 본 논문에서는 이러한 산화아연 막을 용액공정 기반으로 제작하여 형태적, 구조적 특성을 평가하고자 한다. 구체적으로는 졸-겔 방법을 반복적으로 시행하여, 시행 횟수에 따른 산화아연 막의 물성의 변화를 관찰할 것이다. 일정한 용액 조건하에서, 5회의 반복적인 졸-겔 방법을 시행한 결과 결정화가 진행되는 것을 확인하였다. 7회 이상에서는 원소 구성 및 결정화도가 특정 값에 수렴하는 경향을 보였다. 최종적인 산화아연 막의 평균결정의 크기는 약 10.7 nm 정도로 계산되었다. 본 연구를 통해 최적의 결정화를 보이는 공정횟수는 7회였다. 본 연구 결과 및 방법론은 다양한 용액공정 변수를 가변시키면서 적용할 수가 있고 최적의 공정조건을 확립하는데 기여할 것으로 기대한다.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.9-15
• /
• 2020

The 'field-effect' underlies the operation of most conventional electronic devices. However, effective control and implementation of the field-effect in semiconductor devices are limited due to screening of the electric-field by conducting electrodes. Thus far, the electronic devices have necessarily been designed to avoid or minimize the electric-field screening effect. As an alternative approach to this, a new type of conducting electrodes which would be transparent to both visible light and electric-field while being electrically conductive have been developed. Here, we define these electrodes as 'electric-field transparent electrodes' and provide a review on related work. Particular attention is paid to the material selection and design strategies to enhance the electric-field transparency of the electrodes while maintaining good electrical conductivity and optical transparency. We then introduce potential applications of the electric-field transparent electrodes in electronic and optoelectronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.163.1-163.1
• /
• 2016

Lead halide perovskites CH3NH3PbX3 (X=Cl, Br, I) have received great interest in the past few years because of their excellent photoelectronic properties as well as their low-cost solution process. Their theoretical efficiency limit of the solar cell devices was predicted around 31% by a detailed balance model for the reason that exceptional light-harvesting and superior carrier transport properties. Additionally, these excellent properties contribute to the applications of optoelectronic devices such as LASERs, LEDs, and photodetectors. Since these devices are mainly using perovskite thin film, one of the most important factor to decide the efficiency of these applications is the quality of the film. Even though, optoelectrical devices are composed of polycrystalline thin film in general, not a single crystalline form which has longer carrier diffusion length and lower trap density. For these reasons, monodomain perovskite thin films have potential to elicit an optimized device efficiency. In this study, we analyzed the crystallography of the in-plane aligned perovskite thin film by X-ray diffraction (XRD) and selected area electron diffraction (SAED). Also the basic optic properties of perovskites were checked using scanning electron microscopy (SEM) and UV-Vis spectrum. From this work, the perovskite which is aligned in all directions both of out-of-plane and in-plane was fabricated and analyzed.