• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.87-90
• /
• 2002

Daylight responsive dimming system, which is always able to automatically maintain the target illuminance, is a energy strategic system. It is importance note that the photosensor depends how to be precisely indicated workplane illuminance at any location of indoor. Therefore, the purpose of this paper is to find out the optimum location and spatial characteristics of photosensor by considering the correlation for the correct calibration of workplane illuminance and photosensor signal.

• 설비공학논문집
• /
• 제24권5호
• /
• pp.433-442
• /
• 2012

The influence of outdoor sky conditions on photosensor signals were examined to determine an appropriate index that is effectively used for optimum illuminance fluctuation when a daylight dimming system is used for a small office. Field measurements were conducted under various sky conditions. Results indicate that the outdoor global and vertical illuminance fluctuated within narrow ranges under clear and overcast sky conditions. The fluctuation of sky ratio under partly-cloudy sky caused wide ranges of illumnance fluctuation. A partially-shielded photosensor at backwall produced 56% of light output from fixtures controlled by a photosensor at ceiling. This implies that the photosensor at backwall does not always guarantee target illuminance due to the less output. The fluctuation of light output from fixtures were insignificant under clear and overcast sky. The fluctuation range of photosensor illuminance under partly-cloudy sky caused wide fluctuation ranges of light output. Regression result implies that the outdoor vertical illuminance was recommended for an effective index that is used for control of light output.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.60-65
• /
• 2019

In this paper, the hybrid illumination system for effectively detecting surface defects in steel plate with lowcontrast, non-uniformity and featureless is designed based on illuminance uniformity. First of all, characteristics of steel plate defects were considered and typical inspection illumination system is implemented. Optimum illumination parameters for uniformly illuminating an inspection area in the typical illumination system are selected based on the illuminance uniformity and illuminance distribution measurement. The illuminance uniformity and illuminance distribution are measured using an illuminometer based on the arduino. Through illuminance distribution analysis of the typical illumination, an hybrid illumination is designed by fusing bi-directional illumination and coaxial illumination. The hybrid illumination showed higher uniformity ratio and illuminance distribution than the typical illuminations. The hybrid illumination system showed the ability to uniformly illuminate the entire inspection region of steel plate surface.

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.1-8
• /
• 2004

오늘날 축구는 세계적인 주목을 받는 스포츠가 되었다. 특히, 2002 KOREA-JAPAN 월드컵은 한국에 대한 깊은 인상을 심어 주었다. 축구경기장의 조명시스템 설계에 있어서 가장 주요한 기술적 목적은 경기장의 어디에서나 최적의 분포를 나타내도록 하는 것이다. 이렇듯, FIFA는 경기장의 어디에서나 선수, 청중, 방송관계자등에게 일정한 수준의 조도를 제공할 수 있도록 규정하고 있다. 본 논문에서는 경기장의 조명타워의 위치선정에 따른 최적의 수평면 조도와 수직면 조도를 찾기 위한 알고리즘을 제시하였다. 본 논문에서는 Philip's Calculux 프로그램을 이용하여 조명타워의 위치에 따라 수평면 조도, 수직면 조도, 균제도, 글레어 등을 계산하였다.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.33-43
• /
• 2006

Daylight dimming control system was analyzed for an indirect lighting system in a small office space with a double skin envelope system. Computer simulations were performed for photosensors with three shielding conditions. The photosensors were placed on the center of ceiling, and backwall. Three sky conditions defined by CIE were considered. Overall, control performance was not very excellent for all conditions. Fully-shielded photosensor achieved good control performance for some cases, but partially-shielded and unshielded photosensors failed to achieve target illuminance. The variation in desktop illuminance due to daylight was examined for a variety of daylight conditions. Linear correlation between desktop illuminance and photosensor illuminance was analyzed using ANOVA.

• 한국실내디자인학회논문집
• /
• 제33호
• /
• pp.83-89
• /
• 2002

This paper describes the experiments to examine the sense of continuity produced by lighting between physically separated spaces. Tolerable limits of illuminance were measured for providing a sense of continuity between two rooms connected by a window. In the experiments the illuminance and color of lighting of the subjects room were changed while those of the other room were kept constant. The results show that the observers could certainly determine the range of optimum illuminance for them to recognize continuity, and the variance of the results between observers is very small. Moreover, the tolerable range of illuminance was almost constant as far as the color difference was less than some critical value. This finding would be helpful in designing a lighting system for providing a sense of continuity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2417-2419
• /
• 1999

Among educational environment, lighting's role is getting more important since it improves the visual tasks, capability of work, and it help to build both balanced mind and body. Also, since students spend most of their time inside rather than outside, students need appropriate illuminance everyday. If optimum illuminance, the color rendering properties and controlled distribution of lighting is given, people can decrease the fatigue of eyes, recover their health, and also, people can maximize their efficiency of work. In this paper, their is a comparison between the real illuminance and illuminance distribution due to the uniformity ratio of 2 or 3 dimensions by simulation.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.193-199
• /
• 2015

요즈음, 온도 및 습도, 조도 센서를 이용하여서, 식물 재배 환경 정보를 자동으로 수집하고 생장환경을 관리하는 지능형 온실 시스템이 많이 연구되고 있다. 본 논문에서는 조도, 온도 및 습도를 예측해서 인터넷 기반에서, 식물 재배의 최적 환경 조건을 추론하는 모의실험을 하였다. IOT 환경에서, 식물 재배 조건을 온도, 습도, 조도를 아두이노 센서에 실시간으로 온실 관리자에게 전송해서, 식물 재배에 필요한 최적의 온도, 습도 조건 값보다 크거나 적으면 자동으로 SMS 경고 문자를 실시간으로 전송해 주기 때문에, 급격한 기후 변화 (눈,비, 폭염)조건일 경우라도 최적의 화초 재배조건을 관리 할 수 있다. 본 논문에서는 퍼지논리와 WEKA TOOL을 이용하여서, 같은 온대 식물이라도, 그 지역에 필요한 최적의 온도, 습도, 조도(일사량) 수치를 산출하는 모의실험을 하였다.

• Architectural research
• /
• 제7권2호
• /
• pp.47-54
• /
• 2005

A photoelectric dimming control system for a small private office space with a double skin envelope system was analyzed for the purpose of examining optimum control performances under a variety of daylight conditions. Computer simulations were performed for the three different photosensor types positioned at the center of ceiling in the space. They were applied in both a south and north-facing room. Daylight conditions were a fixed horizontal venetian blind on an external envelope and a retractable shading device on an internal envelope under a clear, intermediate and overcast sky at different times of a day and year. Partially-shielded photosensors provided good control performances providing the required electric light output under clear and intermediate sky conditions. Unshielded photosensors failed to provide necessary illuminance levels producing less electric output and fully-shielded photosensors generally provided excessive light output. Reasonable electric lighting energy savings were achieved except under overcast sky conditions where the control system did not contribute to energy savings due to the less daylight through envelopes. The retractable shading device covering 50% of the internal envelope reduced energy savings up to 19.62%, but the workplane illuminance levels were maintained within recommended ranges. The coefficients of determination between workplane illuminance and photosensor illuminance due to daylight ranged from 0.74 to 0.98. Partially-shielded conditions provided best correlations and the north-facing room yielded stronger correlation than the south-facing room.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1713-1715
• /
• 2003

This paper describes an LED module for a desk lamp using 1[W] high flux while LEDs. The optimum length of the module is obtained from the lighting simulation of the target area of $500{\times}500[mm]$ on the desk, which in turn determines an optimum separation between LEDs. The main issue is to find the optimum separation which gives good illuminance uniformity and high coefficient of utilization at at various reflector structures. Two module configuations of linear and ring types are compared. As a result, good illuminance uniformity is obtained in the case of the ring module. The mofied twin type, however, gives better performance than the ring module, and shows the most performance at an separation angle of around $30^{\circ}$.