• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1090-1091
• /
• 2005

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.300-304
• /
• 2012

It has a limitation to satisfy the phosphorus effluent criteria of 0.2 mg/L which will be reinforced from 2012 with the Biological Nutrient Removal (BNR) process. The chemical coagulation process has been operated in parallel with the biological treatment process for advanced treatment of phosphorous in the developed countries including Europe. However, the coagulation process has some disadvantages such as the desired goal may not be achieved without injecting the optimum dosage of the coagulant. This study developed the automatic control system to inject the optimum dosage of phosphorous coagulant into the coagulation process. The adopted coagulant was 10% Poly Aluminum Chloride (PAC) in this study. The automatic control system developed in this study was adopted for the treatment of the phosphorus from the effluent in SBR process. The automatic control system was composed of the data receiving part, the optimum coagulant dosage control part and the data transmit part. The result of the phosphorous advanced treatment of the SBR effluent using the automatic control system showed the removing efficiency over 95% consistently with the phosphorous concentration under 0.02 ~ 0.15 mg/L. The reproducibility analysis for checking the safety of automatic control system showed more than 95% correlation.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.47-55
• /
• 2016

Purpose: As the energy consumed by buildings increases, there is a growing need for studies and technology development to address this issue. One of the solutions to excessive energy use by buildings is the light-shelf, which is a natural lighting system enabling efficient reduction in light energy, and research in this area has been intensive. However, most of the studies about the light-shelf are limited to the light environment, and thus the application of their findings to an actual environment in the form of a design may be problematic. Therefore, the purpose of the present study is to provide fundamental data for light-shelf design by carrying out a light-shelf performance evaluation on the basis of the light environment and the heating and cooling environment. Method: In the present study, a testbed was established to conduct a light-shelf performance evaluation by measuring the electric power consumption of lighting and heating and cooling devices depending on the existence of a light-shelf and its angle. Result: The findings of the present study are as follows: 1) With respect to the uniformity of the indoor light environment amenity, the optimum angle of a light-shelf was found to be $30^{\circ}$ for the summer solstice and the winter solstice. 2) With respect to the reduction of electric power consumption by indoor lighting devices, the optimum light-shelf angle at the summer solstice is $30^{\circ}$, at which time electric power consumption may be reduced by 10.2% in comparison with when no light-shelf is applied. However, at the winter solstice, a light-shelf may increase the energy consumption for lighting in comparison with when no light-shelf is applied, and this should be taken into account in the design of a light-shelf. 3) In terms of reducing the electric power consumption of heating and cooling devices, the optimum angle of a light-shelf was found to be $30^{\circ}$ for the summer solstice, while a light-shelf is inappropriate for the winter solstice since a light-shelf creates shade and thus increases the heating energy consumption. 4) To summarize the findings above, the optimum angle of a light-shelf is $30^{\circ}$ for the summer solstice, but the installation of a light-shelf may in some circumstances increase the energy consumed by lighting devices as well as by heating and cooling devices. Therefore, more studies and technology development may need to be performed to solve the problem of increased energy consumption at the winter solstice.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.687-690
• /
• 2010

The objective of this study is to investigate the effect of aldehyde compounds and ploysulfide as accelerating agents on removal of heavy metals and CN in plating wastewater. As a results of the experiments, the removal efficiency of cyanide using the formaldehyde type of aldehydes was the highest at pH 9. Next types were sodium formaldehyde bisulfite addut> paraldehyde> paraformaldehyde. Also, optimum pH and dosage for treating the residual heavy metals by using polysulfide were pH 9 and 30 mg/L, respectively. The removal efficiencies of cyanide, chromium, zinc and copper were above 96.7% at optimum condition.

• Mycobiology
• /
• v.38 no.3
• /
• pp.195-202
• /
• 2010

Coriolus versicolor, is one of the most popular medicinal mushrooms due its various biologically active components. This study was conducted to obtain basic information regarding the mycelial culture conditions of C. versicolor. Based on the culture, and MCM media were suitable for the mycelial growth of the mushroom. The optimum carbon and nitrogen sources were dextrin and yeast extract, respectively, and the optimum C/N ratio was 10 to 2 when 2% glucose was used. Other minor components required for optimal growth included thiamine-HCl and biotin as vitamins, succinic acid, lactic acid and citric acid as organic acids, as well as $MgSO_4{\cdot}7H_2O$ as mineral salts.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.161-168
• /
• 2005

Kindergarten is the first educational experience of toddlers, where they experience living in a group environment. Carefully designed, it is intended to provide an environment for nurturing the systematic growth and development of youngsters. Through effective stimulation, young children display their abilities as they independently learn in the controlled setting of Kindergarten. This study advocates the support of educational activities through the use of systematic and scientific architectural design in order to achieve the challenging goals and results desired of Kindergarten education. Upon determining the current state of Kindergarten architectural design, I have sought to apply innovative architectural concepts which can be used to design desirable learning environment for Kindergarten aged children. In calculation of area, the average gross building area is minimum $2.3m^{2}/p$ and optimum $2.5m^{2}/p$. The area of classroom is optimum $6.8m^{2}/p$.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.332-336
• /
• 2007

Pseudomonas stutzeri strain KCCM 34719 was used in this experiment to determine the effects of increasing Pb(II) concentrations on its growth rate. To obtain optimum growth conditions, strain KCCM 34719 was cultivated in nutrient broth under various conditions, such as temperature, pH, and NaCl concentration. Optimal conditions for cell growth were $30^{\circ}C$ of temperature, 8.0 of pH, and 3% of NaCl concentration, respectively. Growth response of bacterial cell to Pb(II) showed tolerance to concentrations ranging from 10 to 100 mg ${\ell}^{-1}$ in liquid culture, following a growth pattern similar to the control. Growth rate was greatly inhibited at 200 mg ${\ell}^{-1}$ of Pb(II).

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.290-297
• /
• 1998

In this study an optimization of greenhouse roof shape was performed to maximize solar light transmission which is one of the most important elements in greenhouse environment. To determine roof shape that maximize the total light transmissivity, a computer model for analysing light transmissivity was composed and the Genetic Algorithms was applied for solving optimization problems. By setting composite model as objective function(fitness function), the optimum combination of design variables(roof inclination angle, width ratio) was searched using Genetic Algorithms. The optimum combination of input variables for the maximum light transmissivity at Suwon in winter was found 40 degree root angle , 0.5 width ratio, for two span greenhouses and 37 $_。 / roof angle, 0.7 width ratio, for single span greenhouses.es.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1114-1120
• /
• 2010

A chitosan-degrading fungus, BSF114, was isolated from soil. The culture preparation showed strong chitosanolytic enzyme activity at an optimum pH of 4.0 and optimum temperature of $60^{\circ}C$ after 36-40 h fermentation. The rapid decrease in the viscosity of the chitosan solution early in the reaction suggested an endo-type cleavage of the polymeric chitosan chains. To identify the isolated fungus, molecular biological and morphological methods were used. The fungal internal transcribed spacer (ITS) region 1 was amplified, sequenced, and then compared with related sequences in the GenBank database using BLAST. The phylogenetic relationships were then analyzed, and the results showed that the fungus belongs to Aspergillus fumigatus. Morphological observations were also used to confirm the above conclusion. The chitooligosaccharides (COS) obtained through hydrolyzing the colloidal chitosan showed that A. fumigatus BSF114 is suitable for degrading chitosan and producing chitooligosaccharides on a large scale. High concentrations of the COS (1,000 and 500 ${\mu}g/ml$) significantly proliferated mice marrow cells.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.360-366
• /
• 2015

In this study $TiO_2$ nanotube was grown on Ti by anodic oxidation to be used as a photocatalyst. The growth and formation of $TiO_2$ nanotube was monitored during anodization in ethylene glycol electrolyte by changing voltage and composition of electrolyte. Commercially available titanium plate (purity>99.8%, thickness:1mm) Applied voltage and concentration of $NH_4F$ and $H_2O$ were varied to find the optimum condition. Applied voltage is important to make $TiO_2$ nanotube and the electrolyte containing ethylene glycol, 0.2 wt% $NH_4F$ and 2 vol% $H_2O$ was confirmed to be the optimum conditions for the formation and growth of $TiO_2$ nanotubes.