• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.2
• /
• pp.99-104
• /
• 2019

Solar power generation systems require maximum power point tracking (MPPT) control to acquire maximum power using inefficient and high-cost PV modules. Most conventional MPPT algorithms are based on the slope-tracking concept. The perturb and observe (P&O) algorithm is a typical slope-tracking method. The two factors that determine the MPPT performance of P&O algorithm are the MPPT control period and the magnitude of the perturbation voltage. The MPPT controller quickly moves to the new maximum power point at insolation change when the perturbation voltage is set to large, and the error of output power will be huge in the steady state even when insolation is not changing. The dynamics of the MPPT controller can be accelerated even though the perturbation voltage is set to small when the MPPT control period is set to short. However, too short MPPT control period does not improve MPPT performance but consumes the MPPT controller resources. Therefore, analyzing the performance of the MPPT controller is necessary for actual insolation conditions in real weather environment to determine the optimum MPPT control period and the magnitude of the perturbation voltage. This study proposes an optimum MPPT control period that maximizes MPPT efficiency by measuring and analyzing actual insolation profiles in typical clear and cloudy weather in central Korea.

• Ocean Systems Engineering
• /
• v.2 no.2
• /
• pp.83-97
• /
• 2012

In the present work, design procedure and computer simulation of an AUV are documented briefly. The design procedure containing the design of propulsion system and CFD simulation of hydrodynamics behavior of the hull leads to achieve an optimum mechanical performance of AUV system. After designing, a comprehensive one dimensional model including motor, propeller, and AUV hull behavior simulates the whole dynamics of AUV system. In this design, to select the optimum AUV hull, several noses and tails are examined by CFD tools and the brushless motor is selected based on the first order model of DC electrical motor. By calculating thrust and velocity in functional point, OpenProp as a tool to select the optimum propeller is applied and the characteristics of appropriate propeller are determined. Finally, a computer program is developed to simulate the interaction between different components of AUV. The simulation leads to determine the initial acceleration, final velocity, and angular velocity of electrical motor and propeller. Results show the final AUV performance point is in the maximum efficiency regions of DC electrical motor and propeller.

• Structural Engineering and Mechanics
• /
• v.47 no.4
• /
• pp.513-530
• /
• 2013

In this paper, an improved version of particle swarm optimization based optimum design algorithm (IPSO) is presented for the steel grillage systems. The optimum design problem is formulated considering the provisions of American Institute of Steel Construction concerning Load and Resistance Factor Design. The optimum design algorithm selects the appropriate W-sections for the beams of the grillage system such that the design constraints are satisfied and the grillage weight is the minimum. When an improved version of the technique is extended to be implemented, the related results and convergence performance prove to be better than the simple particle swarm optimization algorithm and some other metaheuristic optimization techniques. The efficiency of different inertia weight parameters of the proposed algorithm is also numerically investigated considering a number of numerical grillage system examples.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.79-86
• /
• 1994

These days much efforts have made all over the world in order to develop the integrated optimum structural design system that performs automated design process composed of the analysis, optimum design, drafting, and reporting. However, these types of design systems oriented extensively to port structures are rarely found. In this paper, the integrated optimun design system applied to gravity type port structures such as quay walls and breakwaters will be briefly presented. Highly sophiscated facilities necessary in optimum structural design including analysis and optimization are integrated into one system. Several types of gravity type port structures can be designed using this system. The application to the real ports and the efficiency of this system will be finally shown.

• Journal of the Korean housing association
• /
• v.16 no.3
• /
• pp.69-77
• /
• 2005

The purpose of this study is to develop a automation for decision of the optimum stories in apartment buildings in order to assure the solar access right for neighboring areas. Compared to the results of the optimum stories by manual process through applying a legal case over solar access right, the proposed method provides more improved and expanded information by automating the computing process of decision of the optimum stories in apartment buildings. With the result of this research, it would be possible to furnish with advanced information for an amicable settlement against the civil petition and disputes, to reduce waste of the time and cost and to improve the efficiency of solar access right analysis works.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.5
• /
• pp.19-26
• /
• 2010

This study was conducted to find out the reasonable optimum design method of agricultural reinforced concrete structures. Selected design variables are the dimension of concrete section, reinforced steel area, and objective function is formulated by cost function. To test the reliability, efficiency, possibility of application and reasonability of optimum design method, both continuous optimization method and mixed-discrete optimization method were applied to the design of reinforced concrete superstructure of aqueduct and application results were discussed. It is proved that mixed-discrete optimization method is more reliable, efficient and reasonable than continuous optimization method for the optimum design of reinforced concrete agricultural structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.245-250
• /
• 1999

In this study, the development of graphic user interface(GUI) program for optimum design of RC continuous beam is dealt. Optimum design problem that satisfies strength, serviceability, durability and geometrical conditions is formulated as a non-linear programming problem(NLP) in which the objective function as well as the constraints are highly non-linear on design variables such as cross sectional dimensions and steel ratio. Optimum design problem is solved by NLP techniques namely, sequential linear programming(SLP), sequential convex programming(SCP). Numerical examples of R.C. continuous beam using GUI system are given to show usefulness of GUI system for practical design work and efficiency of algorithm for the NLP techniques.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1529-1532
• /
• 2003

This paper deals with the impact analysis of the impact absorbing system consist of one degree of freedom and two degree of freedom damping-spring system in spreader to increase efficiency of it. It shows the optimum damping coefficient and spring constant of impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain contact impulse. In the optimal model, the contact impulse is reduced 98.57 percent and 92.22 percent respectively.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.85-92
• /
• 1998

In this study, the electrolytic treatment by one-stage electrolysis was investigated for electroplating wastewater containing $Cr^{6+}$ and $CN^{-}$. From the results, we concluded as follows : Optimum initial pH of wastewater was pH : 3. Amount of optimum addition of electroltyte(NaCl) was 0.1 wt%. Optimum potential for electrolysis was 5 volt. Concentration and removal efficiency for $Cr^{6+}$ and $CN^{-}$ were under 1 mg/L and above 99% at optimum conditions. And the feasibility of electrolytic treatment for electroplating wastewater containing $Cr^{6+}$ and $CN^{-}$ was certified.

• Journal of Ginseng Research
• /
• v.31 no.4
• /
• pp.191-195
• /
• 2007

Red ginseng sikhye is one of Korean unique beverages with the addition of effective ingredients of ginseng. Considering economical and mechanical efficiency and quality of sikhye, the optimum conditions for saccharification is to saccharify at 90 degree celsius for 3 hours in the composition of 4% of malt, 20% of steamed rice, and 6% of red ginseng power. The red ginseng sikhye has high soluble solid content over 33% compared with conventional commercial sikhye. On the other hand, ginseng sikhye, which shows low pH, has more or less higher acidity than conventional commercial one. Especially the turbidity of the red ginseng sikhye is much higher than that of commercial sikhye, due to as high amount of rice as 20% compared with 3% in the commercial one. The use of high quantity of rice affected the level of turbidity in red ginseng sikhye. In this study, we wanted to establish optimum conditions for saccharification in manufacturing red ginseng sikhye which contains effective herbal medicinal ingredients maintaining the original taste of traditional sikhye.