• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.827-830
• /
• 1997

Sensory evaluation method was used to develop a type jujube tea the organoleptic properties were evaluated with regard to the optimum sugar content, clarity, drinking temperature and fruit pulp content of the jujube tea. Clarified jujube tea extracted from 25% by weight of dry jujube fruits and 75% water was preferred to those from 15%, 20% and 30% jujube fruites although those from 20% and 30% were not significantly different at 5%level. In spite of the average acceptability score of cloudy jujube tea with 5% of added fruit pulp was not significantly different from that of clarified one, the more fruit pulp in the tea products the worse its acceptability. Cold jujube tea was preferred to warm and hot ones, but these were not significantly different.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.239-243
• /
• 1996

In this paper, we have tried to focus on the optimum conditions of crystal structure parameters on YBCO high Tc oxide-superconductor as an excel lent electronic parts. When we verify the characteristic improvement of superconductance and accurate reproduction and so forth, we have made use of RIETAN. We have varied the lattice constant with oxygen content from 6.0 to 7.0 as for transition of orthogonal structure and tetragonal structure for the superconductor. As the result of above, we have preyed that transition from orthogonal structure to tetragonal structure is made at the point of 6.6(oxygen content) by using the simulation.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.55-58
• /
• 1995

The effects of Ni contents in Cu base sintered friction material were studied. The contents of Ni were increased up to 9 wt% in the Cu-Sn matrix. The microstincture and tribological behavior of the friction material were examined. Pin on disk type of constant speed friction test rig were used to measure the friction and the wear rates. The results show that Ni addition increased the friction coefficients and decreased the wear rates of the materials. Relations between microhardness of the matrix and friction properties have been discussed. In addition optimum Ni content is recommended through the analysis of wear debris.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.279-286
• /
• 2013

Application properties of ultra light weight silica aerogel toward polyurethane membranes were investigated. From the results of pre-milling process of the silica aerogel, the solvent for dispersion of the aerogel was determined for methyl ethyl ketone and its content in the solvent was determined by 30%. Using this aerogel dispersion, the polyurethane membranes were prepared according to the mixing amount of silica aerogel and various properties of the membranes were investigated. As results, the optimum mixing amount of silica aerogel inside polyurethane membranes was decided at 11%, because the improvement of light weight property, air permeability, and moisture vapor permeability were improved upto 11% of silica aerogel content, maintaining the water penetration resistance almost unchanged.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.123-128
• /
• 2013

This study was performed to evaluate the slump flow, air content, setting time, compressive strength, adiabatic temperature rise and diffusion coefficient of chloride used ordinary portland cement, crushed coarse aggregate, crushed sand, river sand, fly ash, limestone powder, blast furnace slag powder and superplasticizer to find optimum mix design of low carbon green concrete for structures. The performances of low carbon green concrete used fly ash, limestone powder and blast furnace slag powder were remarkably improved. This fact is expected to have economical effects in the manufacture of low carbon green concrete for structures. Accordingly, the fly ash, limestone powder and blast furnace slag powder can be used for low carbon green concrete material.

• Geomechanics and Engineering
• /
• v.9 no.2
• /
• pp.261-273
• /
• 2015

In the present investigation, a series of laboratory compaction and unconfined compressive strength laboratory tests has been performed. To determine the effect of compaction energy, type of sand, and fly ash content, compaction tests have been performed with varying compaction energy ($2700kJ/m^3-300kJ/m^3$), types of sand, and fly ash content (0% to 40%) respectively. From the experimental results, it has been found that the optimum value of unconfined compressive strength obtained for a sand-fly ash mixture comprised of 65% sand and 35% fly ash. Based on the data obtained in the present investigation, a linear mathematical model has been developed to predict the OMC of sand-fly ash mixture.

• Environmental Analysis Health and Toxicology
• /
• v.12 no.3_4
• /
• pp.75-84
• /
• 1997

Chromatographic retention behavior and separation of various phenol derivatives on a Partisil 10 ODS 3 column-with mobile phase containing $\alpha$-cyclodextrin-were systematically studied. The decrease in k' values caused by the addition of cyclodextrins in the mobile phase was based on the formation of an inclusion complex, resulting in weakening of the hydrophobic interaction between solutes and the stationary phase. The content of the organic solvent in the mobile phase also influenced k' values of the solutes, and k' values increased with a decrease of the content of organic solvent in the mobile phase. A simple equation has been derived that reveals the hyperbolic dependence of the capacity factor on the total concentration of cyclodextrin. A plot of the reciprocal of the capacity factor against (CD)$_T$ gives a straight line and the dissociation constant, K$_D$, of the inclusion complex can be calculated from the slope. The capacity factor decreased with increasing temperature. The enthalpy was calculated from the slope of van't Hoff plots. Under optimum conditions, some mixtures of phenol derivatives were able to separated successfully.

• The Korean Journal of Mycology
• /
• v.37 no.2
• /
• pp.167-172
• /
• 2009

Mycelia of Pleurotus ostreatus, Phellinus linteus, Ganoderma lucidum and Lentinus edodes were cultured in the selected cereals to generate functionally active cereals. The optimum water contents for the mycelial growth were 50%(wt/wt) for brown rice, barley and soybean and 75% for wheat and corn, respectively. P. ostreatus grew well in the most cereals while the mycelial growth of P. linteus, G. lucidum and L. edodes in soybean were siginificantly retarded. The contents of β-glucan and glucosamine in the mycelial cereals were determined. Wheat cultured with mushroom mycelia showed high ß-glucan content. Especially, wheat with G. lucidum contained the highest value of 26.16%. Soybean cultured with G. lucidum showed two-fold increase in glucosamine content with 9.63% of total mass while wheat showed 7.91%. Overall, wheat cultured with G. lucidum was the best functional cereal in terms of β-glucan and glucosamine contents.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2002

The blocks using flyash were prepared in this study. The characteristic of sound absorption of flyash block was investigated. It was revealed that the chemical additives and flyash played an important role to determine the characteristic of sound absorption. Chemical additive affects the capability of sound absorption while flyash affects the characteristic of sound absorption, i.e. high value of the sound absorption coefficient at the specific frequencies(1KHz and 2KHz). The flyash block showed higher sound absorption coefficient than that of the commercial concrete block having carpet on the surface. It was also shown that the sound absorption coefficient increases with increase of the content of flyash in the block. However, it was found that the 70wt% of flyash in the flyash block was the optimum content to obtain the highest sound absorption coefficient.

• Electrical & Electronic Materials
• /
• v.10 no.6
• /
• pp.528-532
• /
• 1997

The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way, Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by testing expansion coefficient, impedance characteristics, overvoltage. As a result, the performance of Ni-YSZ anode(40vol%) was better excellent than the others.