• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.2
• /
• pp.93-104
• /
• 1996

A field experiment was conducted in Chungju and Jungwon to evaluate growth characteristics, dry matter yield, protein yield and palatability of intercropping comparing with monocropping forage crops by the use of sorghum $\times$ sudangrass hybrid(S.S.H.), five forage soybeans and two forage cowpeas of superior to selected experiment of varieties. All eight treatment plots were replicated three times and cutting date were cut July 6 and September 9. 1. The mean leaf number of S.S.H. in intercropping T2 treatment showed high compared to T1 treatment in all treatment except for Hwangkeum treatment, but T3 treatment was lower than the other treatments. In the leaf number of soybean, Jangbaek treatment was the highest as 47 leaves per plant, cowpea treatments showed high above 50 leaves. The stem diameter of S.S.H. in Jangyeob treatment of T2 treatment was 9.6mm. In legume, cowpea of T3 treatment was high as ranged from 7.9mm to 8.2mm. In stem hardiness of S.S.H., TI treatment was the lower than the other treatments, while Jangbaek treatment of T2 treatment was the highest as $2.0kg/cm^2$. In legume crops, Jangbaek and Baekun treatment were the highest as $1.6kg/cm^2$, but T3 treatment was very low as $0.3~0.6kg/cm^2$. 2. In the mean leaf ratio of S.S.H., T1 treatment was higher than T2 and T3 treatment as 34.9%. In the legume crops, Togyu treatment was the highest as 40.9%. In the mean tiller number of S.S.H., T2 treatment showed high compared to TI treatment, but T3 treatment of was rather decrease than The tiller number of S.S.H. in Jangyeob treatment of T2 treatment was the highest as 4.6 per plant. The dead stubble of S.S.H. was high in order to T3>T1>T2 treatment>, T3 treatment was highly about 2 times compared to T2 treatment. 3. S.S.H. as T3 treatment was resistant to lodging, but T3 and T1 treatment showed highly lodging. In the legums, T3 treatment was resistant to lodging, but T2 treatment showed highly lodging. In the S.S.H. of T2 treatment, the leaf of summer depression was not occurrence, but T3 treatment was higher than the other treatments. 4. The palatability of domestic animals was high in order of T2>Tl>T3, especially Togyu treatment of T2 treatment was the highest at the holstein and deer, and Jangyeob treatment of T2 treatment was the highest in the Korean native cattle. But T3 treatment was lower than other treatments in the holstein and Korean native cattle. 5. Fresh yield of monocropping(T1) was the highest as 94, 650kg/ha, while dry matter yield in Jangyeob treatment of T2 treatment was the highest as 15, 575/ha But fresh yield and dry matter yield of T3 treatment were the lowest(P<0.05). 6. Protein yield in T2 treatment was high, especially Jangyeob treatment of T2 treatment was the highest as 1, 605.5 kg/ha T3 treatment was low in spite of high protein content, because dry matter yield was lower than the other treatments. In conclusion, among T1, T2 and T3 treatment, Jangyeob, Togyu and Baekun treatments of T2 treatment showed optimum varieties for intercropping with S.S.H., because they showed high Dry matter yield, protein yield and palatability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.326-332
• /
• 2001

To investigate a fertility status of upland soil, the soil were sampled at 854 sites chosen in consideration of areal distribution percent on the basis of topography and were analyzed on pH, organic mater, available phosphorus ($P_2O_5$), exchangeable potassium and calcium and magnesium. The content of soil chemical properties showed pH 5.6, organic mater $24g\;kg^{-1}$, available $P_2O_5$ $577mg\;kg^{-1}$, exchangeable potassium and calcium and magnesium were 0.85, 4.5, $1.4cmol^+kg^{-1}$, respectively. The distribution percent of soil samples within the optimum range for cropping were 13.4% for pH, 46.7% for organic matter. 27.4% for available $P_2O_5$, 10.7, 15.8, 18.3% for exchangeable potassium and calcium and magnesium, respectively. In chronological changes of soil properties, exchangeable calcium and magnesium were ignorable ; pH was slightly decreased ; organic matter was slightly increased ; available $P_2O_5$ and exchangeable potassium were greatly increased.

• Food Science of Animal Resources
• /
• v.28 no.1
• /
• pp.51-58
• /
• 2008

This study was performed to evaluate the physico-chemical properties of fermented sausages containing probiotic starter cultures (LK-30 plus, Lactobacillus plantarum 155 and 167, and Pediococcus damnosus L12) with reduced fat levels, and to determine the optimum condition for the manufacture of these products. Although low-fat fermented sausages were reduced fat content at the amount of 90% and the ripening time by 1-2 weeks, as compared to regular-fat counterpart, they became harder and had many winkles outside due to the extreme drying. In addition, fat level in fermented sausages affected the composition and shear force values. During ripening, pH, lightness and yellowness values tended to decrease, however, microbial counts of inoculated lactic acid bacteria were increased up to $10^8-10^9cfu/g$ within 3 days and remained constant thereafter. Low-fat fermented sausages had higher microbial counts than regular-fat ones. Although the inoculated probiotic starter cultures alone had the functional properties, such as cholesterol reduction, anti-high blood pressure and antimicrobial activity, they did not have distinctive characteristics in the fermented sausages. Based on these results, the low-fat fermented sausages were successfully manufactured, but a little bit increased fat level and improved functional properties in the fermented sausages would be required to have better quality as compared to regular-fat counterparts.

• The Korean Journal of Mycology
• /
• v.13 no.3
• /
• pp.157-168
• /
• 1985

To investigate nutritive values of a feed fermented with basidiomycetes, among the isolated strains, Lyophyllum decastes (Fr.) Sing. was found with the greatest enzyme productivity and rapid mycelial growth in rice straw medium. Optimum temperature, pH and moisture content for mycelial growth and enzyme production of the strain were $25{\sim}30^{\circ}C,\;pH\;4.0{\sim}7.0\;and\;70{\sim}75\;%$, respectively. Fifteen days of culture were required for the highest enzyme productivity. Among the sub-materials added, $30{\sim}40\;%$ of rice bran and $10{\sim}20\;%$ of defatted perilla seeds were effective for the enzyme production, but caused a reduced mycelial growth. The greatest effect of an addition of inorganic salts was obtained with $0.36{\sim}0.72\;%\;of\;(NH_4)_2HPO_4$. When 40 mesh or smaller rice straw and steam treatment at $0.5\;kg/cm^2$ were used, the mycelial growth decreased, whereas the enzyme production increased. The mycelial growth and enzyme production increased when $Ca(OH)_2$ was used as the alkali treatment, but decreased with increasing concentration of NaOH. As the fermentation proceeded, the amounts of ash, reducing sugar and total nitrogen increased, but cellulose, lignin and pentosan decreased. When the rice straw was treated with alkali, the amounts of ash, total nitrogen and lignin decreased, but reducing sugar and cellulose increased. At higher NaOH concentration, the variation become greater. The in vitro dry matter digestibility of the products increased from 55.03 % at the beginning of the fermentation to 62.72 % at 45 days after fermentation. The most effective alkali treatment on the digestibility of rice straw was KOH followed by NaOH. However, the digestibility increased with increasing concentration of NaOH. The digestibility of pretreated with alkali increased after fermentation as well.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.731-744
• /
• 2005

Ninety Hanwoo steers(initial BW=167.2$\pm$13.4kg) were used to determine the effect of energy concentrations in concentrates and slaughter age on performance, carcass characteristics. Steers were allotted by BW to one of eighteen pens. Eighteen pens were randomly allotted to a low(70-70-71-72% for the growing, the early, the middle or the late fattening periods), medium(70-71-72-73%) or high(70-72- 73-74%) TDN level of concentrates. Five steers for each treatment of energy level were slaughtered every one month from 26 month of age to 31 month of age. Concentrates was fed restrictedly to achieve a predicted gain of 0.7-0.9kg from growing stage to middle fattening stage. All steers were fed orchard grass(Dactylis glomerata L.) hay as roughage during the growing period, fed rice straw gradually substituted for orchard grass hay during the early fattening period, and fed rice straw only thereafter. Overall body weight and feed intake were not affected by TDN levels of concentrates. Average daily gain for all treatments was higher than 0.9kg/d during the 19-21 month of age and decrease thereafter, but sustained above 0.7kg/d. Mean concentrates intake for all treatments was 1.0-1.3% of live BW during the growing period and 1.5% during the early fattening. Thereafter, it decreased up to 1.4% during the middle fattening and 1.0% during late fattening period. Delay of slaughter end point resulted in a gradual increase of rib-eye area, back fat thickness and marbling score, especially after slaughter age of 29 month there was significant increases(P<0.05). The appearance rate of 1+ and 1 grade related to the slaughter ages was 100% at 29, 30 and 31 months of age, whereas those at 26, 27 and 28 months were 93, 86 and 80%, respectively. Dressing rate was significantly(P<0.05) increased and rate of retailed cut weight significantly(P<0.05) decreased when slaughter age increased. In economic analysis, there was pronounced increase in net income up to 32-46% after slaughter age of 29 months. Under the conditions of this study, high TDN intake is not necessarily required for high quality Hanwoo meat production and slaughter age of 29 month might be the optimum for Hanwoo steers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.484-490
• /
• 2015

Thirty-eight Pea (Pisum sativum L.) genotypes were screened to identify varieties to be suitable for sprout. Based on seed yield and sprout qualities such as whole length and sprout yield, five genotypes (PI269803, PI343278, PI343283, PI343300 and PI 343307) were primarily selected as candidates for pea sprouts. In order to determine optimal cultivation condition for pea sprouting, growth characteristics were investigated according to the change of germination temperature and days for sprouting. Whole length and hypocotyl length were observed to increase as a time dependent manner at each tested temperature (20, 23, and $25^{\circ}C$). However, whole length, hypocotyl length, and sprout yield were highly increased at $23^{\circ}C$ compared to 20 and $25^{\circ}C$. Especially, PI269803 and PI343300 showed higher sprout yield than the others. In addition, the effect of the change of germination temperature on antioxidant properties was estimated by measuring total phenolic content (TPC) and free radical scavenging activity (DPPH and ABST activity). TPC and DPPH/ABST activities of PI269803 and PI343300 were higher at $23^{\circ}C$ than at 20 and $25^{\circ}C$, while antioxidant properties of PI343278 and PI343283 were decreased in a temperature-dependent manner. The results show a high degree of correlation between TPC and antioxidant activities and suggest that the temperature change for pea sprouting could be responsible for antioxidant properties. Taken together, these results provide optimal cultivation conditions for pea sprouting and suggest that PI269803 and PI343300 with high sprout yield and antioxidant properties could be used for pea sprouts.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.51-57
• /
• 2000

Waste newspapers was used as an amendment to adjust the moisture of household food wastes for composting. The mixture of household food wastes and waste newspapers was composted in an especially designed small home composter, where the early fed composting materials were discharged early. The temperature inside composting materials was influenced very much by that of outside, because the composter was not insulated. Accordingly, the higher the outside temperature was, the higher the decomposition rate was. The temperature inside composting materials did not reach to optimum, because the amount of composting materials added in the composter everyday was too little, and it caused too high water content of discharged compost after 15 weeks. Therefore, it was required that the composter must be insulated to maintain the higher temperature. The inorganic compounds$(K_2O,\;CaO,\;MgO,\;P_2O_5)$ and heavy metals(Zn, Cu, Cr, Cd, Hg, As) were accumulated obviously in produced compost, when dry recycled compost was reused as the amendment for adjusting the moisture.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.243-249
• /
• 2006

Porous polymer gel electrolytes (PGEs) based on poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) as a polymer matrix and polyvinylpyrolidone (PVP) as a pore-forming agent were prepared and electrochemical properties were investigated for an electric double layer capacitor (EDLC) in order to increase a permeability of an electrolyte into the PGE. Propylene carbonate (PC) and ethylene carbonate (EC) as plasticizers, and tetraethylammonium tetrafluoroborate ($TEABF_4$) as a supporting salt for the PGE were used. EDLC unit cells were assembled with the PGE and electrode comprising BP-20 and MSP-20 as activated carbon powders, Super P as a conducting agent, and P(VdF-co-HFP)/PVP as a mixed binder. Ion conductivity of PGEs increased with an increased PVP content and was the best at 7 wt% PVP, whereas electrochemical characteristics such as AC-ESR of unit cell were better in 3 wt%. And electrochemical characteristics of the unit cell with PGE were the best at a 33 : 33 weight ratio of PC to EC. Specific capacitance of a mixed plasticizer system of PE and EC was higher than that of pure PC. Ion conductivity of PGEs with a film thickness of $20{\mu}m$ was higher, but electrochemical characteristics of unit cells were higher for a $50{\mu}m$ membrane thickness. Also, the unit cell has shown the highest capacitance of 31.41 F/g and more stable electrochemical performance when PGE and electrode were hot pressed. Consequently, the optimum composition ratio of PGE for EDLCs was 23 : 66 : 11 wt% such as P(VdF-co-HFP) : PVP = 20 : 3 wt% and PC : EC = 44 : 22 wt%. In this case, $3.17{\times}10^{-3}S/cm$ of ion conductivity was achieved at the $50{\mu}m$ thickness of PGE for EDLCs. And the electrochemical characteristics of unit cells were $2.69{\Omega}$ of DC-ESR, 28 F/g of specific capacitance, and 100% of coulombic efficiency.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.