• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.702-711
• /
• 2015

In this paper, an effective carrier-based modulation (CBM) strategy to reduce the switching losses for indirect matrix converters (IMCs) is presented. The discontinuous pulse width modulation method is applied to decrease the switching numbers in one carrier cycle, and an optimum offset voltage is selected to avoid commutations of the high output phase currents. By decreasing the switching numbers along with avoiding commutation of the high currents, the proposed CBM strategy significantly reduces the switching losses in IMCs. In addition, the proposed CBM strategy is independent of load conditions, such as load power and power factor, and it has good performance in terms of the input/output waveforms. Simulation and experimental results are provided to verify the effectiveness of the proposed CBM strategy.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.221-224
• /
• 2009

In this paper, we deal with the development of an optimal design program for a dual-band of 0.92 GHz and 2.45 GHz with shorting pin and slot by using evolution strategy. the optimal shorting pin, coaxial feed and H-shaped patch are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the dual-band antenna yielded by the optimal design program are 0.92 GHz and 2.45 GHz that show a good agreement to the design target values.

• Communications for Statistical Applications and Methods
• /
• 제24권3호
• /
• pp.255-269
• /
• 2017

This article explores the analysis of longitudinal surveys in which same units are investigated on several occasions. Multivariate exponential ratio type estimator has been proposed for the estimation of the finite population median at the current occasion in two occasion longitudinal surveys. Information on several additional auxiliary variables, which are stable over time and readily available on both the occasions, has been utilized. Properties of the proposed multivariate estimator, including the optimum replacement strategy, are presented. The proposed multivariate estimator is compared with the sample median estimator when there is no matching from a previous occasion and with the exponential ratio type estimator in successive sampling when information is available on only one additional auxiliary variable. The merits of the proposed estimator are justified by empirical interpretations and validated by a simulation study with the help of some natural populations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.363-365
• /
• 1991

This paper presents a method for feeder reconfiguration in order to operate distribution systems efficiently using heuristic rules. The reconfiguration method presented here not only eliminates various abnormal states but also achieves minimum power loss and optimum load balance of the distribution feeders under normal operating condition transfering loads from one feeder to anoter applying the experiences of the experts. To implement the method effectively, a best-first tree searching strategy based on heuristics is used to evaluate the various load transfer alternatives. The development of a rule-based system aimed at the reduction of the search space is presented as a means of implementing the best-first searching strategy. The results of the computer simulation of the above procedure are as follows; 1) achieving minimum power loss of the distribution feeder adopting the optimum load transfer alternative. 2) Enhencing system reliability and achieving load balance through rational allocation of the feeder loads.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.57-62
• /
• 2009

This paper deals with the optimal design of a shield plate in order to minimize Extremely-Low-Frequency(ELF) magnetic fields generated from three-phase bus bars. Combining an evolutionary strategy with a 3D finite element analysis tool, the main dimensions of the shield plate are sought out. The optimization procedure consists of two separated design stages to take into account all foreseen structures of the plate. In the first stage, the basic dimensions of the plate are optimized including the distance between the plate and the bus bars. Then the usefulness of the additional structures such as a slit and fillet is investigated in the second stage. Finally the optimum design of the shield plate is suggested from the viewpoint of the shielding effectiveness and manufacturing cost.

• Advances in Computational Design
• /
• 제1권2호
• /
• pp.119-138
• /
• 2016

In this article, hybridization of enhanced colliding bodies optimization (ECBO) with upper bound strategy (UBS) that is called UECBO is proposed for optimum design of truss structures with frequency constraints. The distinct feature of the proposed algorithm is that it requires less computational time while preserving the good accuracy of the ECBO. Four truss structures with frequency limitations selected from the literature are studied to verify the viability of the algorithm. This type of problems is highly non-linear and non-convex. The numerical results show the successful performance of the UECBO algorithm in comparison to the CBO, ECBO and some other metaheuristic optimization methods.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1521-1526
• /
• 2007

This paper presents the application of Adaptive Evolutionary Algorithm (AEA) to search an optimal setting of overcurrent relay coordination to protect ring distribution systems. The AEA takes the merits of both a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner to use the global search capability of GA and the local search capability of ES. The overcurrent relay settings and coordination requirements are formulated into a set of constraint equations and an objective function is developed to manage the overcurrent relay settings by the Time Coordination Method. The domain of overcurrent relays coordination for the ring-fed distribution systems is a non-linear system with a lot of local optimum points and a highly constrained optimization problem. Thus conventional methods fail in searching for the global optimum. AEA is employed to search for the optimum relay settings with maximum satisfaction of coordination constraints. The simulation results show that the proposed method can optimize the overcurrent relay settings, reduce relay mis-coordinated operations, and find better optimal overcurrent relay settings than the present available methods.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.63-71
• /
• 1983

Aggregate planning coordinate the control variable over long-term to apply a demand variable and forcasting. In order to necessary the goal that doesn't make an inter-contradiction and explicitly defined. We made a considerable point of system approach for scheduling establishment. It include the control variables of aggregate planning : 1) employment 2) over time working and idle time 3) inventory 4) delivery delay S) subcontract 61 long - term facility capacity. Each variables composed of pure strategy as like a decision of inventory level, a change of employment level, etc. md alternative costs make a computation on the economic foundation. But the optimum alternative costs represent the mixed pure strategy. The faults of this method doesn't optimum guarantee a special scheduling as well as increasing a number of alternative combination. Theoretical, Linear Decision Rule make an including all variables, but it is almost impossible for this model to develope actually And also make use of the aggregate planning problem for developing system approach : LDR, heuristic model, Search Decision Rule, all kind of computers, simulation. But these models are very complex, each variables get an extremely inter-dependence. So this study be remained by theory level, some approach methods has not been brought the optimum solution to apply in every cases.

• 대한수의학회지
• /
• 제47권1호
• /
• pp.51-57
• /
• 2007

To establish a statistically reliable sampling strategy for serological surveillance of classical swinefever (CSF) in Korea, antibody test data from CSF surveillance conducted during year 2005 were analyzed.The most appropriate sampling method was determined to be stratified multi-stage random sampling strategy,in which the primary sampling unit is a pig farm and the secondary are the pigs by the strata of breedersand finishers in the selected farm. The optimum sample size was 5 to 19 including 1 to 2 breeders accordingto the number of pigs in the farm. The optimum sampling strategy demonstrated in this study was veryFindings of our study provide practical guidelines for surveillance of herd immunity level to CSF in Korea.

• Journal of Microbiology and Biotechnology
• /
• 제32권6호
• /
• pp.783-791
• /
• 2022

Gamma-aminobutyric acid (GABA) improves various physiological illnesses, including diabetes, hypertension, depression, memory lapse, and insomnia in humans. Therefore, interest in the commercial production of GABA is steadily increasing. Lactic acid bacteria (LAB) have widely been reported as a GABA producer and are safe for human consumption. In this study, GABA-producing LAB were preliminarily identified and quantified via GABase assay. The acid and bile tolerance of the L. plantarum FBT215 strain were evaluated. The one-factor-at-a-time (OFAT) strategy was applied to determine the optimal conditions for GABA production using HPLC. Response surface methodology (RSM) with Box-Behnken design was used to predict the optimum GABA production. The strain FBT215 was shown to be acid and bile tolerant. The optimization of GABA production via the OFAT strategy resulted in an average GABA concentration of 1688.65 ± 14.29 ㎍/ml, while it was 1812.16 ± 23.16 ㎍/ml when RSM was applied. In conclusion, this study provides the optimum culture conditions for GABA production by the strain FBT215 and indicates that L. plantarum FBT215 is potentially promising for commercial functional probiotics with health claims.