• Journal of Biosystems Engineering
• /
• v.35 no.3
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• Asian Journal of Turfgrass Science
• /
• v.14 no.1
• /
• pp.273-280
• /
• 2000

This study was conducted to evaluate an efficiency of plant growth regulator trinexapacethy(Primo) on the growth response of bentgrass and the change to soil water content in bentgrass green. Based on the results of the study, the following results were observed. 1. During four weeks after treatment, the visual color and turfgrass density of all the treated plots with trinexapac-ethyl(Primo) were more improved rather than without. Two treatments trinexapac-ethyl /$0.02mL\m^2$ and $0.04mL/\m^2$ were more favorable than other treatments. 2. It suggested that optimum rate to reduce the bentgrass growth and to increase the turfgrass density was the trinexapac-ethyl $0.04mL/\m^2$. 3. For six weeks after treatment, all treated plots were not significantly different (P<0.05) in turfgrass root length and root dry weitht. 4. In the treated plots with trinexapac-ethyl $0.04mL/\m^2$ for 25days in bentgrass green, soil water consumption was approximately 35% to 40% compare to the non-treated control.

• Korean Journal of Oriental Medicine
• /
• v.14 no.1
• /
• pp.113-116
• /
• 2008

Petiole explant of Glehnia littoralis Fr. Schmidt was in vitro cultured MS plant medium(DUCHEFA co.) supplemented with various plant growth regulators and examined to find out their optimum combination and concentration for plantlet regeneration. We investigated optimal condition for efficient plant regeneration through adventitious shoot formation on MS plant medium with various kinds of plant growth regulators. Embryogenic calli and adventitious shoot formation were greatly influenced by plant growth regulators. Embryogenic calli induction showed a good response on MS medium supplemented with NAA and BA than others. Especially, combination of 1.0 mg/L NAA and 0.5 mg/L BA on MS medium led to the greatest frequency in adventitious shoot. The results suggest that plant regulator selection be important factor to achieve an efficient regeneration.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.193-200
• /
• 2004

The Active Constrained Layer Damping(ACLD) combines the simplicity and reliability of passive damping with the low weight and high efficiency of active control to attain high damping characteristics. The proposed ACLD treatment consists of a viscoelastic damping which is sandwiched between an active piezoelectric layer and a host structure. In this manner, the smart ACLD consists of a Passive Constrained Layer Damping(PCLD) which is augmented with an active control in response to the structural vibrations. The arc type shell model is introduced to describe the interactions between the vibrating host structure, piezoelectric actuator and viscoelastic damping. The system is modeled by applying ARMAX model and changing a state-space form through the system identification method. An optimum control law for the piezo actuator is obtain by LQR(Linear Quadratic Regulator) method. The performance of the ACLD system is determined and compared with PCLD in order to demonstrate the effectiveness of the ACLD treatment. Also, the actuation capability of a piezo actuator is examined experimentally by varying thickness of viscoelastic material(VEM).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1032-1038
• /
• 2002

The Active Constrained Layer Damping(ACLO) combines the simplicity and reliability of passive damping with the low weight and high efficiency of active control to attain high damping characteristics. The proposed ACLD treatment consists of a viscoelastic damping which is sandwiched between an active piezoelectric layer and a host structure. In this manner, the smart ACLD consists of a Passive Constrained Layer Damping(PCLD) which is augmented with an active control in response to the structural vibrations. The Arc type shell model is introduced to describe the interactions between the vibrating host structure, piezoelectric actuator and visco damping, The system is modeled by applying ARMAX model and changing a state-space form through the system identification method. An optimum control law for piezo actuator is obtain by LQR(Linear Quadratic Regulator) Method. The performance of ACLD system is determined and compared with PCLD in order to demonstrate the effectiveness of the ACLD treatment, Also, the actuation capability of a piezo actuator is examined experimentally by using various thickness of Viscoelastic Materials(VEM).

• Korean Journal of Microbiology
• /
• v.24 no.2
• /
• pp.113-118
• /
• 1986

Optimum temperature and pH of glutamine synthetase activity (E.C. 3.6.1.2.) of R. sphaeroides D-230 was $35^{\circ}C$ and 6.8, respectively. The adenylated state of GS in R. sphaeroides D-230 was stabilized by addition of 0.2mg/ml of cethyltrimethylammoniumbromide. Valine, histidine, proline, isoleucine, and lysine were good nitrogen source for the growth of R. sphaeroides D-230. The growth of R. sphaeroides D-230 in $N_2,\;NaNO_3\;or\;NH_4Cl$ as sole nitrogen source was lower than in any otherculture conditions. GS activity was inhibited, more or less, by various amino acid. THe relative inhibition rate of the enzyme by added 7mM arginine, $NH_4Cl,\;N_2,\;and\;NaNO_3$ was 63.8%, 26.79%, 6.24%, and 10.64%, drespectively. THe hydrogen evolution of R. sphaeroides D-230 grown in N-limited media was inhibited by 0.1mM MSX, irreversible GS inhibitor. GS activity was completely inhibited by 1.0mM MSX but ammonia released maximally at the same concentration of MSX. Ammonia release by added MSX was increased up to 1.0mM MS, but decreased above 1.0mM MSX. It is probably due to inhibition of nitrogenase actixity by MSX. Nitrogenase activity was not inhibited at low concentration of MSX. These results suggests that the inhibition of nitrogenase activity by ammonia is mediated by products of ammonia assimilation rather than by ammonia itself.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.30-30
• /
• 2019

Pea (Pisum sativum) is one of important legume crops in the world. It is commonly used as a protein source for animal and human diet, and also used as a natural nitrogen source which is produced by a symbiotic bacterium in their root nodule and helpful for terrestrial ecosystem. The successful in vitro manipulation is depended on three main factors including physiology of plant donor, in vitro manipulation approach, and stress physiology during plant cultivation. Moreover, genotype is an important for plant manipulation; different genotype gives the different response to regeneration efficiency. An efficient condition of shoot induction for pea (Pisum sativum cv. 'Sparkle') was developed by using optimum explant, plant growth regulator concentrations, and pretreatment of BA onto explant. The average shoot number per explant showed the highest on two kinds of shoot induction media (MSB5 media containing 2 mg/L BA and a combination of 2 mg/L BA and 1 mg/L TDZ) with cotyledonary node explants culture. Moreover, the pretreatment of explant in 200 mg/L BA solution was found to be more effective in shoot induction than that of non-pretreatment. The analysis of genetic stability of regenerants by using 13 ISSR markers presented that in vitro regenerated plants showed polymorphism with 8.3% compared with their mother plants.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.493-499
• /
• 2006

In this study, we investigated the effect of growth regulators, seed priming, and light condition for the germination and early growth in Snapdragon (Antirrhinum majus L.). The optimum concentration of growth regulator for the promotion of germinability turned out to be 250 uM of $GA_3$. The germination enhancement in combination of $GA_3+BAP$ was not significant. The optimum priming condition for the maximum germinability was 2 day treatment of 200 mM of $KNO_3$. which increased germination by 14% and shortened the day to germination by 3.5 days. The optimum temperature for germination was $15{\sim}25^{\circ}C$. The germination frequency was decreased to lower than 20% at $30^{\circ}C$, which showed that seeds of Snapdragon germinates better at low temperature than high temperature. The germination frequency was different at light condition; it was low at dark condition, but was increased by $15{\sim}20%$ at red light condition. The combination of $GA_3$ and seed priming showed better germinability than the single treatment of $GA_3$ and seed priming.

• Horticultural Science & Technology
• /
• v.16 no.4
• /
• pp.520-524
• /
• 1998

This study was carried out to investigate the effect of thidiazuron(TDZ) on callus and shoot primordia formation, to determine the most optimum multiple shoot induction medium, and to obtain the plantlets on solid medium via shoot organogenesis. TDZ 0.01 mg/L in MS medium was most effective on callus formation, and BA 0.1 mg/L was most effective on shoot growth, while TDZ 0.01 mg/L was most effective on callus formation. TDZ 0.001 mg/L was most effective in shoot primordia formation. Shoot tips were cultured with TDZ 0.01 mg/L for 8 weeks and induced callus was transferred to regeneration medium containing TDZ 0.001 mg/L. After 4 weeks induced shoot primordia were resubcultured at growth regulator-free medium for 4 weeks. The induced multiple shoots rooted more efficiently at NAA 1.0, 5.0 mg/L, or IBA 5.0 mg/L.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.331-335
• /
• 2013

Buckwheat sprout is used as vegetable, and also flour for making noodles, and so on. Currently, information about tissue culture in buckwheat is limited and restricted to micro-propagation. We carried out somatic embryogenesis and plant regeneration using hypocotyl segments as explant of the cultivated buckwheat species, Fagopyrum esculentum which differs from existing studies in the growth regulator combinations used. Maximum callus regeneration was induced on MS medium containing 2,4-dichlorophenoxyacetic acid (2,4-D) $2.0mg{\cdot}L^{-1}$, benzyladenine (BA) $1.0mg{\cdot}L^{-1}$ and 3% sucrose. Friable callus was transferred to solidified MS media containing BA ($1.0mg{\cdot}L^{-1}$) with various concentrations of 2,4-dichlorophenoxyacetic acid for the induction of embryogenesis. The optimum concentrations of growth regulators (for regeneration of plantlet) were indole-3-acetic acid ($2.0mg{\cdot}L^{-1}$), Kinetin ($1.0mg{\cdot}L^{-1}$), BA ($1.0mg{\cdot}L^{-1}$). Only 2,4-D did not show any significant effect on callus induction or embryogenesis. Regeneration of embryonic callus varied from 5% to 20%. Whole plants were obtained at high frequencies when the embryogenic calli with somatic embryos and organized shoot primordia were transferred to MS media with 3% sucrose. The main objective of this research was to develop an efficient protocol for plant regeneration for common buckwheat, and to apply in future for genetic transformation.