• 한국광학회지
• /
• 제1권2호
• /
• pp.155-161
• /
• 1990

메틸알코올 레이저의 여기용으로 저속축류형의 가변파장 $CO_2$ 레이저를 제작하였다. 파장가변은 ZnSe Brewster 창과 반사 회절격자를 사용하였으며, 반사 회절격자는 Blaze wavelength 10.6$\mu\textrm{m}$, 100grooves/mm 인 평면형이다. 실험은 $CO_2$ 레이저의 연속발진 출력특을 살펴보고, $CO_2$ 레이저의 전 발진구간을 파장가변시켜 얻어진 출력분포를 $CO_2$ 레이저의 이득 곡선과 비교하였다. 연속발진 출력은 기체 혼합비 $CO_2: N_2$ : He=1:3:10, 전류 55mA, 압력 14 torr 일 때 100W를 얻었다. 가변된 파장은 10.4$\mu\textrm{m}$ 영역의 R(6)-R(38), P(6)-P(36), 9.4$\mu\textrm{m}$ 영역의 R (10)-R(32), P(10)-P(38)의 약 60여개의 회전선이 발진함을 확인하였고, 이 때의 파장은 9.3295$\mu\textrm{m}$에서 10.7648$\mu\textrm{m}$까지 변화하였다. 각 영역에서 얻어진 출력분포는 $CO_2$ 레이저의 이득곡선과 잘 일치하였고, 최대 출력은 20W 정도였다.

• Tribology and Lubricants
• /
• 제34권3호
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.56-62
• /
• 2000

A fast and precise technique to make 3-dimensional object which is called direct metal shaping process is processed. It is very useful technique in design and inspection. Using this developed system, a solid object is made. In experiment, test parts are built by varying three factors, laser power, scan path, scan speed. This process used device, which is different from the widely used in rapid prototyping in that powder feeding device is used. Spraying powder directly at the focused laser beam and then three dimensional object is made by the deposit of melted metal powder. The optimum scanning path is found to be zigzag path, which had little thermal affection on base metal. As a result of these experiments, it was found that optimum scanning speed is 15mm/sec laser power is 50W. This constructed 3-dimensional object could be used in mold manufacturing directly.

• 한국광학회지
• /
• 제17권1호
• /
• pp.60-67
• /
• 2006

본 논문에서는 I자형과 U자형의 변압기를 각각 사용한 펄스형 고전압 전원에 의해 대기압에서 동작되는 파장 337.1 nm인 질소레이 저의 방전간극과 레이저 관에 각각 광섬유를 설치하고, 이를 통해 나오는 빛을 핀 다이오드를 이용하여 선전리 현상을 직접 관측하고 출력특성을 조사하였다. 레이저 출력이 안정되고 높아질수록 선전리 현상을 뚜렷이 관측할 수 있었고, 레이저 출력은 I자형 변압기보다는 U자형의 변압기를 사용하였을 때 높은 출력과 안정성을 얻었으며, 또한 펄스 방전의 예비동작 시간도 U자형이 1/3 정도 짧았다. U자형의 변압기를 사용하고 출력창의 반사율 $40\%$, 반복율 10 Hz, 레이저 관내에서 질소기체의 유동률이 4 ${\iota}$/min, 방전간극 내에서 질소기체의 유동율이 1500 cc/min, 방전간극 전극 거리 3.0 mm, 레이저 관 내 전극거리 5.0 mm 일 때, 안정성이 $2.7\%$인 $36{\mu}J$의 출력을 얻었다.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.63-70
• /
• 2022

Laser welding has attracted great attention as a tool used to join electrical steel coils. In this study, laser butt welding for electrical steel coil joining was conducted using the Taguchi method. It was found that structural defects such as void sand cracks were not produced in welds. This indicated that the performance of laser welding in electrical steel was excellent. According to the Taguchi analysis, the total welding quality index (TWQI) considering the bead height and roughness and tensile strength of the weld joint was almost evenly affected by laser power, welding speed, and focal position. The optimum welding conditions to maximize the TWQI were a laser power of 1220W, welding speed of 90 mm/s, and a focal position of 1mm. The regress model predicting the TWQI was also developed using the surface response method. We found that the model predicts measured values with an average error of 16.36%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1820-1823
• /
• 2003

A high speed feeding type laser cutting M/C is developed for precise cutting of sheet metal. This paper has been carried out to obtain cutting characteristics and optimal cutting conditions of the developed high speed feeding type laser cutting M/C by a design of experiments. Cutting speed. laser power. laser duty and gas pressure are control factors for the surface roughness. The major factors affecting the surface roughness and the optimum cutting conditions are studied with minimum experiments using Taguchi method.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.20-25
• /
• 2003

Various welding methods such as Gas Tungsten Arc Welding(GTAW), magnetic force electrical resistance welding and Laser Beam Welding(LBW) are now available for end cap closure of nuclear fuel rods. Even though the resistance and GTA welding processes are widely used in manufacturing commercial fuel rods, they can not be recommended for the remote seal welding of fuel rods in the hot cell Facility due to the complexity of the electrode alignment, the difficulty in replacing parts in a remote manner and the large heat input for the thin sheath. Therefore, the Nd:YAG laser system using optical fiber transmission was selected for the end cap welding of irradiation fuel rods in the hot cell. The remote laser welding apparatus in the hot cell Facility was developed using a pulsed Nd:YAG laser of 500 watt average power with an optical fiber transmission. The weldment quality such as microstructure and mechanical strength was satisfactory. The optimum conditions of laser welding for encapsulating irradiation fuel rods in the hot cell were obtained.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.84-86
• /
• 2003

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power CO$_2$1aser. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. Butt-welding was also carried out to show the effect of gap on the laser weldability of thin sheet. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too many heat input. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about 80% value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.558-563
• /
• 1995

Dynamic characteristics of TbFeCo magneto-optical recording media at 680nm wavelength region were studied by means of computer simulation of disc structure and optimization of process variables during sputter deposition. With the slightly reduced Kerr rotation angle due to the reduced wavelength of optical laser source, the improved recording density in TbFeCo magneto optical media showing the CNR greater than 50dB could be achieved by only adjusting the thickness of dielectric and the recording layers when the wavelength of light source is changed from 780nm to 680nm. In addition, the recording power margin of 5mW and the 2mW minimum recording power was realized, It was shown from the present study that the increase in laser power density demonstrated feasibility of low cost and low power laser diode with the reduced optimum recording power.