• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.3-9
• /
• 2004

The main objectives of this paper are to determine optimum cutting conditions using experimental design method to manufacture pedicle screws. Generally, titanium alloys are known as difficult-to cut materials. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of Its low thermal conductivity and chemical reactivity. Such phenomenon cause increase of tool wear and deterioration of surface quality. Thus, in this paper, required experimental investigations are performed to evaluate the machinability of titanium materials With tungsten carbide tools Required simulation and experiments are performed, and the results are investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.183-188
• /
• 1995

Up to date, high-strength concrete pile which is producing in factory sells in the market. But according to the site and the construction conditions, the system to produce high-strength concrete pile directly in site is utilized in advanced country. Such the production system is the technique phenomenon very disirable in the side of quality control in site and the construction schedule, the time and the cost saving. This study is a fundamental experiment including concrete mixing design, non-autoclave curing method and the optimum condition to produce high-strengh concrete pile in site. As results of this study, High-strength concrete pile in site which target strength is 400kg/ $\textrm{cm}^2$ is able to produce it with optimum curing ciondition(75$^{\circ}C$, 9hr)and mixing design.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.99-107
• /
• 1990

Many accidents related to robot operation occur during the robot teaching process. This paper deals with recommendations for the teach pendant design parameters to enhance safety and performances in human-robot interactions. In order to investigate the optimum location and the size of the emergency stop button on the teach pendant, an experiment was conducted with a simulated teach pendant which can accomodate four different locations and three sizes of the button. Under a simulated emergency condition, the reach time to the emergency stop button was measured at random combination of the location and the size of button. The reach time was significantly affected by the location and the size of the emergency stop button. The fastest average reach time was attained with 1.5 inch-diameter button on the upper center of the teach pendant.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.149-158
• /
• 1994

Powder forged Connecting Rods have become attractive for use in automotive engines. The powder forging process offers beneficial material utilization as well as the minimization of finishing operations over that of conventionally forged rods. In the present work, the sintering behavior of Fe-2Cu-0.6C, optimum preform design and forgeability of various forging variables were investigated. Our data were generated using a newly proposed sub-scale con-rod developed specifically to simulate the powder forging process. We obtain optimum condition of sintering and powder forging process.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.42-46
• /
• 2009

Superimposed training (SIT) design for estimating of time-varying multipath channels is investigated for mobile orthogonal frequency division multiplexing (OFDM) systems. The design of optimum SIT consists of two parts: The optimal SIT sequence is derived by minimizing the channel estimates' mean square error (MSE); the optimal power allocation between training and information data is developed by maximizing the averaged signal to interference plus noise ratio (SINR) under the condition of equal powered paths. The theoretical analysis is verified by simulations. For the metric of the averaged SINR against signal to noise ratio (SNR), the theoretical result matches the simulation result perfectly. In contrast to an interpolated frequency-multiplexing training (FMT) scheme or an SIT scheme with random pilot sequence, the SIT scheme with proposed optimal sequence achieves higher SINR. The analytical solution of the optimal power allocation is demonstrated by the simulation as well.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.198-201
• /
• 2003

The multi-action forging process is one of developing directions of forging technologies. In this study, the multi-action die is designed and developed by the screws mechanism and the forging simulation is conducted by using plasticine to investigate the optimum conditions for the design of the screws. The results show the design variables are optimum when the diameter is 30 mm and the screw angle is $60^{\circ}$ for the upper screw rod and the outer diameter is 60 mm and the screw angle is $23.4^{\circ}$ for the lower screw tube. It makes the relative velocity between the upper punch and the die to be two to one, which is the expected condition. The material flow of the plasticine forgings is uniform. Therefore, it is feasible to use the screw set as the multi-action mechanism for controlling the movement of the multi-action forging die set.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.311-312
• /
• 2002

In this paper a systematic design approach to determine the optimum size (height) of circulating fluidized bed heat exchanger for exhaust gas heat recovery is prososed. Unlike the convensional heat exchangers where the length of the heat exchanger section is not very much emphasized, the vertical length of heat exchanger tube in the case of fluidized bed heat exchangers is important because this length determines the time interval during which particles reside and transfer heat in the heat exchanger section. For particles initial conditions are nearly stationary, accelerating particles motion should be considered rather than simply assuming fully developed condition. A way to estimate optimum tube length at different fluid velocity and particle sizes is suggested based on the required conditioning time for heat transfer from the flue gas to solid particles.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.37-49
• /
• 1996

For highly reliable devices it is often defined to "fail" when its performance degrades below a specified value. In this paper we consider a method for optimally designing accelerated degradation tests(ADTs) in which the performance over exposure time and stress has Weibull distribution. For the product whose performance has Weibull distribution, the optimum plan - low stress level and sample proportions allocated to each test condition - is obtained, which minimize the asymptotic variance of maximum likelihood estimator of a stated quantile at design stress. We also present compromise ADTs plan that can be used for the practical purpose.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.576-579
• /
• 2002

This paper compares the performances of estimate by computer simulation considering parameters of system specifications, Installation and surrounding conditions with those of real PV system and show verification of designed value. We evaluate the performances of PV system with changing of parameter, specially a field type and suggest optimum condition in each field type. In the future, We will Intend to develop an analysis tool and construct database for optimum design of PV system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.281-285
• /
• 2002

This paper compares not only the performances of estimate by computer simulation considering parameters of system specifications, installation and surrounding conditions with those of real PV system and but also shows verification of designed value. We evaluate the performances of PV system with changing of parameter, specialty a field type and suggest optimum condition in each field type. in the future, we will intend to develop an analysis tool and construct database for optimum design of PV system.