• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.125-134
• /
• 1997

This study was conducted by L9 orthogonal array to obtain optimum spray parameters for This study was conducted by L9 orthogonal array to obtain optimum spray parameters for $Cr_3C_2 - 7wt%$(80wt%Ni-20wt%Cr) coating powder. The factors were hydrogen flow rate, oxygen flow rate, gun-to-work distance, powder feed rate. And evaluation methods for the coating were surface roughness, oxygen concentration, micro-hardness, pore size and distribution, low angle ($30^{\circ}$) erosion rate, and microstructure of coating. The optimum HVOF spray conditions were proved as follows : hydroen flow rate ; 681 SLPM, oxygen flow rate ; 215 SLPM $H^2/O^2 ratio= 3.16), gun-to-work distance ; 22cm, powder feed rate; 25g/min. The hardness (Hv300) was 1147 and the erosion rate ($30^{\circ}$degree) was $3.16\times10^{-4}$g/g. It is believed that the optimized spray conditions can be improved the wear-resistance and anti-erosion characteristics of the coating.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.

• 한국식생활문화학회지
• /
• 제20권1호
• /
• pp.61-67
• /
• 2005

The purpose of study was to determine the organoleptic characteristics of homemade basil-pasta made in various compounding ratio according to central composite design. The optimum mixing condition for basil-pasta was optimized by response surface methodology. The texture, including color, flavor, elasticity and overall quality, was measured as sensory evaluation. The optimum mixing rates of durum wheat semolina, basil and egg were 73.97g, 5.95g and 36.17g for color, 53.14g, 4.52g and 35.85g for flavor, 48.75g, 2.95g and 36.85g for elasticity. The organoleptic overall quality of basil-pasta showed the maximum score in the mixing condition of 55.52 g durum wheat semolina, 4.55g basil paste and 35.51g egg.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.8-15
• /
• 2006

It is no wonder that mechanical structures are accompanied by problems related to corrosion after being exposed to long hours of work. Corrosion of mechanical structures has been the most serious problem in the field of industry. The present study employed a laser beam irradiation test to improve the corrosion resistance of degraded Cr-Mo steel, which was used for more than 60,000 hours. To find the optimum irradiation test condition for the corrosion resistance of degraded Cr-Mo steel, hardness and residual stress measurements, micro-structural observation, and the electrochemical potentiokinetic reactivation (EPR) tests were performed with changes in laser beam test conditions including laser beam output, diameter, and velocity. Thus, the present study indicates that the optimum test condition and absorption energy for a laser beam test need to be determined to enhance corrosion resistance of degraded Cr-Mo steel.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.19-24
• /
• 2003

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1107-1112
• /
• 2008

The objective of this paper is to investigate into the influence of the injection conditions on the insert deformation and the wall thickness of the injection part using the three-dimensional injection molding analysis. Full three-dimensional insert model was added to the injection molding analysis model to consider the effects of insert deformation during the injection molding process. In order to obtain the optimum injection molding condition with a minimum insert deformation, degree of experiments were utilized. From the results of the analyses, it was shown that the optimum injection condition is injection time of 1.6 sec, injection pressure of 30 MPa and packing time of 15 sec. In addition it was shown that the wall thickness is approached to target thickness when the core deformation is considered in the injection molding analysis.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2236-2241
• /
• 2009

In this study, the electron behavior was investigated numerically in order to obtain guidelines for design and operation of a new plasma source by a magnetic neutral loop discharge (NLD). The optimum plasma production was investigated by using a 3-dimensional simulation model which enables the electron behavior calculation from source region to downstream region. The results showed that the high-density plasma produced around the magnetic neutral loop (NL) is transferred from the NL region to the downstream region along magnetic force lines. Also the avaraged electron energy is increased with the normalized RF electric field (F), which can be used to characterize the plasma production efficiency of NLD system. Considering the relation between F and plasma production, in-depth plasma control can be achieved at a given specific process condition.

• 대한의생명과학회지
• /
• 제10권2호
• /
• pp.129-135
• /
• 2004

The study was carried out through measuring the temperature and humidity of the indoor/outdoor space and the distribution of interior thermal condition, and investigating the effect of loess materials on human body. The purpose of this study is to analyze the change of dry bulb temperature and relative humidity and correlation of thermal reaction of human body with ASHRAE (American Society of Heating, Refrigerating and Air-conditioning) comfort chart in the loess interior space. In the view point of biomedical sciences, loess interior space provides optimum thermal conditions for human thermal sensation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.439-443
• /
• 2003

MAGLEV is the vehicle which can run in levitated condition by the electro-magnets, and the vehicle can run without any contact condition. In MAGLEV system achieving a high magnetic field for minimum weight is a noteworthy goal. Unfortunately the two aspects of this goal high field and low weight are contradictory. Suitable designs must be sought using optimization techniques. In this paper is a technique for designing a electro-magnet in terms of simple equation.