• 제목/요약/키워드: Optimum Coagulation pH

검색결과 78건 처리시간 0.026초

전통식품(청국장)으로 부터 fibrin용해 세균의 분리 동정 (Isolation and Identification of Fibrinolytic Bacteria from Korean Traditional Chungkookjang)

  • 허석;주현규;이시경
    • Applied Biological Chemistry
    • /
    • 제41권2호
    • /
    • pp.119-124
    • /
    • 1998
  • 체내혈액의 응고기작에 의해 생성된 단백질인 fibrin을 분해할 수 있는 효소를 분비하는 균을 청국장으로부터 분리하여 동정하였다. 청국장으로부터 protein 분해능이 있는 균주를 분리하고 분리한 균주들 중에서 혈전용해능이 가장 우수한 균주인 KCK-7를 선발하였다. 이 균주는 호기성으로 포자를 형성 하는 Gram(+)균이었으며 Gas chromatography에 의한 세포의 지방산 분석은 $C_{150}\;anteiso$형이 40.85%, $C_{150}\;iso$형이 19.47% 이었다. 이 균주는 생리, 생화학적 특성 및 세포지방산 분석을 통하여 Bacillus subtilis로 동정되었다. Bacillus subtilis KCK-7의 fibrinolytic enzyme 생성을 위한 최적 배양 온도와 pH는 각각 $37^{\circ}C$, 8.0이었다.

  • PDF

된장으로 부터 fibrin 용해 세균의 분리에 관한 연구 (The study on isolation of fibrinolytic bacteria from soybean paste)

  • 허석;주현규;송기방;이시경
    • Applied Biological Chemistry
    • /
    • 제42권1호
    • /
    • pp.6-11
    • /
    • 1999
  • fibrin 단백질을 분해할 수 있는 효소를 분비하는 균을 된장으로부터 분리하여 동정하였다. 된장으로부터 protein 분해능이 있는 균주를 분리하고 분리한 균주들 중에서 혈전용해능이 가장 우수한 균주인 KDO-13을 선발하였다. 이 균주는 호기성으로 포자를 형성하는 Gram(+)균 이었으며 gas chromatography에 의한 세포의 지방산 분석은 $C_{15:0}$ anteiso fatty acid가 47.7%, $C_{15:0}$ iso fatty acid가 13.5% 이었다. 이 균주는 생리, 생화학적 특성 및 세포지방산 분석을 통하여 57.7%의 similarity를 갖는 Bacillus atrophaeus로 잠정 동정되었다. Bacillus atrophaeus KDO-13의 fibrinolytic enzyme 생성을 위한 최적 배양 온도와 pH는 각각 $37^{\circ}$와 6.0 이었다.

  • PDF

마그네사이트 광석(鑛石)의 염산용해(鹽酸熔解) 특성(特性) 및 불순물(不純物) 제거 (Dissolution Characteristics of Magnesite Ore in Hydrochloric Acid Solution and Removal of Impurity)

  • 엄형춘;박형규;김철주;김성돈;윤호성
    • 자원리싸이클링
    • /
    • 제18권6호
    • /
    • pp.38-45
    • /
    • 2009
  • 마그네사이트 광석의 염산용해 특성 및 불순물 제거에 대한 연구를 수행하였다. 마그네사이트의 용해율은 용해온도가 증가할수록, 광석 입도가 감소할수록 증가하였다. 최적 용해조건은 용해시간 2시간, 용해온도 $80^{\circ}C$, 광석입도 $100\;{\mu}m$ 였으며, 최적 용해조건에서 98%의 Mg를 용해할 수 있었다. Si, Al 성분들은 대부분 용해잔사에 존재하므로 용해 후 여과를 통하여 상당량 제거가 가능하였으며, 용해된 불순물들은 용액의 pH 조절을 통하여 금속 수산화물로 석출시켰다. 또한 석출된 금속 수산화물을 응집, 침강시키기 위하여 고분자 응집제를 사용하였으며, 최적 응집제 주입 조건은 비이온계 고분자 응집제 1 mg/100 ml이었다.

해수 응집과 펜턴 산화에 의한 유수지 수환경 개선에 관한 연구 (A Study on the Improvement of Water Environment in Retention Pond by Seawater Flocculation and Fenton Oxidation)

  • 김진한;전세진;임지영;송연민;유근우;정종태;박정환
    • 한국습지학회지
    • /
    • 제12권1호
    • /
    • pp.75-82
    • /
    • 2010
  • 본 연구는 인천광역시에 위치한 A 유수지의 효율적인 수환경 개선 방안을 모색하기 위해 수행되었다. 유수지 수질 및 저니질의 개선을 위해서 약품 응집과 해수 응집, 펜턴 처리 실험 등을 수행하였다. 실험 결과 해수 응집을 위한 최적 pH는 11이었으며, 해수 응집에 의해 SS, TP 항목 모두 높은 제거효율을 얻을 수 있었다. 저니토의 오염물질 제거를 위해서는 펜턴 산화 처리를 수행하였다. 저니토를 직접 펜턴 처리하는 경우와 용출 후 펜턴 처리하는 경우에 대한 처리효과를 비교한 결과, 제거-COD/$H_2O_2$는 단순 펜턴 처리하는 경우 0.55인 반면 용출 후 펜턴 처리하는 경우 0.69를 나타내어 용출 후에 산화 처리하는 방법이 처리효율 면에서 약 25% 보다 우수한 것으로 나타났다. 이들 두 처리로 유수지 수질을 호소수질기준 VI등급(매우 나쁨)에서 III등급(보통)의 수준으로 개선할 수 있었다.

수용액 중의 염료 제거를 위한 폐수처리공정의 특성(1) -화학적 응집 및 생물학적 처리- (Characteristics of The Wastewater Treatment Processes for The Removal of Dyes in Aqueous Solution(1) - Chemical Precipitation or Biological Treatment -)

  • 한명호;허만우
    • 한국염색가공학회지
    • /
    • 제17권2호
    • /
    • pp.31-39
    • /
    • 2005
  • This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

소규모 쓰레기 매립장 침출수의 효율적인 처리 방안에 관한 연구 (Effective Treatment System for the Leachate from a Small-Scale Municipal Waste Landfill)

  • 조영하;권재현
    • 한국환경보건학회지
    • /
    • 제28권1호
    • /
    • pp.51-65
    • /
    • 2002
  • This study was carried out to apply some basic physical and chemical treatment options including Fenton's oxidation, and to evaluate the performances and the characteristics of organic and nitrogen removal using lab-scale biological treatment system such as complete-mixing activated sludge and sequencing batch reactor(SBR) processes for the treatment of leachate from a municipal waste landfill in Gyeongnam province. The results were as follows: Chemical coagulation experiments using aluminium sulfate, ferrous sulfate and ferric chloride resulted in leachate CO $D_{Cr}$ removal of 32%, 23% and 21 % with optimum reaction dose ranges of 10,000~15,000 mg/$\ell$, 1,000 mg/$\ell$ and 500~2,000 mg/$\ell$, respectively. Fenton's oxidation required the optimum conditions including pH 3.5, 6 hours of reaction time, and hydrogen peroxide and ferrous sulfate concentrations of 2,000 ~ 3,000 mg/$\ell$ each with 1:1 weight ratio to remove more than 50% of COD in the leachate containing CO $D_{Cr}$ between 2,000 ~ 3,000 mg/$\ell$. Air-stripping achieved to remove more than 97% of N $H_3$-N in the leachate in spite of requiring high cost of chemicals and extensive stripping time, and, however, zeolite treatment removing 94% of N $H_3$-N showed high selectivity to N $H^{+}$ ion and much faster removal rate than air-stripping. The result from lab-scale experiment using a complete-mixing activated sludge process showed that biological treatability tended to increase more or less as HRT increased or F/M ratio decreased, and, however, COD removal efficiency was very poor by showing only 36% at HRT of 29 days. While COD removal was achieved more during Fenton's oxidation as compared to alum treatment for the landfill leachate, the ratio of BOD/COD after Fenton's oxidation considerably increased, and the consecutive activated sludge process significantly reduced organic strength to remove 50% of CO $D_{Cr}$ and 95% of BO $D_{5}$ . The SBR process was generally more capable of removing organics and nitrogen in the leachate than complete-mixing activated sludge process to achieve 74% removal of influent CO $D_{Cr}$ , 98% of BO $D_{5}$ and especially 99% of N $H_3$-N. However, organic removal rates of the SBR processes pre-treated with air-stripping and with zeolite were not much different with those without pre-treatment, and the SBR process treated with powdered activated carbon showed a little higher rate of CO $D_{Cr}$ removal than the process without any treatment. In conclusion, the biological treatment process using SBR proved to be the most applicable for the treatment of organic contents and nitrogen simultaneously and effectively in the landfill leachate.e.

미생물 페니실린 아미다제에 관한 연구 (제 5보) Bacillus megaterium 페니실린 아미다제의 새로운 고정화 방법 (Studies on Microbial Penicillin Amidase (Part 5) Application of Reinforced Calcium-Alginate Gel Entrappment Method for Immobilization of Penicillin Amidase from Bacillus megaterium)

  • Son, Hyeung-Jin;Seong, Baik-Lin;Mheen, Tae-Ick;Han, Moon-Hi
    • 한국미생물·생명공학회지
    • /
    • 제9권3호
    • /
    • pp.159-164
    • /
    • 1981
  • 부분적 항상성변이주인 Bacillus megaterium (KFCC 10029)가 생산하는 페니실린 아미다제를 예로하여 강화된 $Ca^{++}$-alginate gel에 의한 포괄방법을 이용하는 효소 고정화 방법을 제시하였다. 발효액으로 부터 celite 흡착법에 의해 효소를 분리한 후 alginate의 gellatin용액에 혼합하고 $Ca^{++}$ 용액에서 응고시키고 glutaraldehyde로 처리하여 성형하였다. 이렇게 하여 얻은 고정화효소의 최적 pH 및 온도는 각각 8.0과 6$0^{\circ}C$였다. Km value 와 6-APA 및 페닐초산에 의한 저해 상수는 각각 2.6mM, 7.4mM, 21.2mM이었다. Gel의 증가된 물리적 강도 때문에 반응조 조작중 흡착효소의 유실을 성공적으로 없앨수 있었다. 관형식 반응조에서의 고정화 효소의 반감기는 4$0^{\circ}C$와 3$0^{\circ}C$에서 각각 6일 및 30일이었으며, 이것은 흡착효소와 비교해 볼 때 6-8배의 증가치이다. 결론적으로 alginate gel 포괄방법에 의한 효소고정화 방법에 있어, 본 연구에서 개발된 개량된 방법을 사용함으로써 고정화효소의 물리적 강도 및 안정도를 크게 증가시킬 수 있었다.

  • PDF

동시 질산화-탈질(SND) 반응을 적용한 MBR 반응조에서 질소 및 인 제거 특성 (Nitrogen and Phosphorus Removal in Membrane Bio-Reactor (MBR) Using Simultaneous Nitrification and Denitrification (SND))

  • 전동걸;임현숙;안찬현;이봉규;전항배;박찬일
    • 대한환경공학회지
    • /
    • 제35권10호
    • /
    • pp.724-729
    • /
    • 2013
  • 동시 질산화 탈질은 미세 용존 산소하에 한 반응조내에서 일어난다. 따라서, 본 연구에서는 인 방출을 위해 공기가 공급되는 MBR 전단에 혐기성 존을 만들어주었으며, 높은 DO 농도에서 탈질효율을 향상시켜 주기 위해서는 MBR 내에 배플을 설치하여 무산소 존이 이루어지게 하였다. 그리고 인 제거를 위한 테스트는 MBR 전단의 혐기성 반응조에 알럼 응집제를 투입하여 수행하였다. 질소 제거를 위한 SND의 최적 DO 농도 도출은 MBR 내 DO 농도를 2.0, 1.5, 1.0, 0.75 mg/L의 다양한 조건에서의 운전을 통해 수행하였다. 심지어 높은 알칼리성 하수라 알럼 응집제를 투입하였을 때 알칼리 용액 첨가 없이도 pH는 7.0~8.0로 유지되었다. TCODcr와 $NH_4^+$-N의 제거 효율은 모든 DO 농도에서 90% 이상이었다. DO 농도 2.0, 1.5, 1.0, 0.75 mg/L에서의 TN 제거효율은 각각 50, 51, 54, 66%이었다. DO 농도 0.75 mg/L 조건에서 알럼을 첨가한 결과 TN 제거효율은 54%로 감소하였다. 혐기성 반응조에 알럼을 투입한 결과 TP 제거효율은 29%에서 95%로 향상되었다. 그리고 알럼 투입 후 분리막 모듈의 화학적 세정 주기는 15~20일부터 40~50일으로 늘어났다.