• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.781-796
• /
• 2020

Prediction of total sediment load is essential in an extensive range of problems such as the design of the dead volume of dams, design of stable channels, sediment transport in the rivers, calculation of bridge piers degradation, prediction of sand and gravel mining effects on river-bed equilibrium, determination of the environmental impacts and dredging necessities. This paper is aimed to investigate and predict the total sediment load of the Wadi Arbaat in Eastern Sudan. The study was estimated the sediment load by separate total sediment load into bedload and Suspended Load (SL), independently. Although the sediment records are not sufficient to construct the discharge-sediment yield relationship and Sediment Rating Curve (SRC), the total sediment loads were predicted based on the discharge and Suspended Sediment Concentration (SSC). The turbidity data NTU in water quality has been used for prediction of the SSC in the estimation of suspended Sediment Yield (SY) transport of Wadi Arbaat. The sediment curves can be used for the estimation of the suspended SYs from the watershed area. The amount of information available for Khor Arbaat case study on sediment is poor data. However, the total sediment load is essential for the optimal control of the sediment transport on Khor Arbaat sediment and the protection of the dams on the upper gate area. The results show that the proposed model is found to be considered adequate to predict the total sediment load.

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• 신재생에너지
• /
• 제19권4호
• /
• pp.11-19
• /
• 2023

Levulinic acid (LA) derived from cellulosic biomass, serves a crucial intermediate that can be used in various chemical conversions. This study focused on optimizing the production of LA using two types of pretreated rice husk (de-ashed and delignificated cellulosic biomass) in a batch reaction system through catalytic conversion with sulfuric acid. To determine the optimal conditions, the conversions of glucose and α-cellulose were examined to compare the effects of pretreatment on the rice husk. The experimental parameters covered a broad spectrum, including temperatures ranging from 140℃ to 200℃, a reaction time was up to 600 minutes, and a substrate to catalyst (acid solution) ratio of 100 g/L. The highest LA yield was 44.8%, achieved from de-ashed rice husk with 3.0 wt.% of sulfuric acid at 180℃ and with a reaction time of 180 minutes. In the case of the delignificated rice husk, a LA yield of 43.6% was obtained with 3.0 wt.% of sulfuric acid at 200℃ and with reaction time of 30 minutes.

• 한국수산과학회지
• /
• 제57권3호
• /
• pp.292-301
• /
• 2024

It is challenging to simultaneously estimate parameters in a stock-recruitment relationship, steepness, and natural mortality rate with the other parameters within an age-structured assessment model even in a data-rich situation. Such a problem leads to uncertainty in estimates of management references such as maximum sustainable yield (MSY), which are affected by those components. The objective of this study was to evaluate the effects of those parameters on MSY by analyzing the process of estimating the MSY. For illustration, we used two data sets: The chub mackerel Scomber japonicus in the Korean waters and the yellowtail flounder Limanda ferruginea in the Southern New England-Mid Atlantic. As a result, the natural mortality rate influenced spawning stock biomass per recruit, yield per recruit, and MSY, while steepness affected MSY. A sensitivity analysis enabled us to estimate the natural mortality rate and steepness. The optimal set of steepness and natural mortality was 1.0 and 0.37 per year for the chub mackerel, and 0.35, and 0.8 per year for the yellowtail flounder, respectively.

• 생태와환경
• /
• 제44권2호
• /
• pp.172-177
• /
• 2011

본 연구는 최적화된 자원량을 기반으로 최대 생산성을 얻을 수 있는 잠재생산량 추정을 통한 어족자원(꺽지)의 효율적 관리방안을 모색하고자 하였다. 이를 위해 섬진강 중 상류 수계에서 2008년 8월부터 2009년 4월까지 계절별로 총 4회 조사를 실시하였다. 자원량 추정은 소해면 적법(Swept Area method)을 이용하였으며, 잠재생산량은 생물학적 허용어획량(Allowable Biological Catch, ABC)에 기초한 어족자원 잠재력 추정시스템을 수정 보완하여 사용하였다. 또한, 꺽지 자원의 효율적인 관리 방안을 검토하기 위해 가입당생산량모델(Beverton and Holt)을 사용하였다. 연구결과, 어획개시연령($t_c$)은 1.464 age로 나타났으며, 이를 체장으로 환산한 결과 7.8 cm(BL)로 확인되었다. 현재 어획강도를 나타내는 순간어획사망계수(F)는 0.061 $year^{-1}$이었으며, 이를 기준으로 한가입당 생산량(Y/R)은 4.124 g로 추정되었다. 어획개시연령($t_c$)과 순간어획사망계수(F)를 기준으로 한 적정어획사망계수($F_{ABC}$)는 0.401 $year^{-1}$로 추정되었는데 이는 현재 꺽지 자원에 대한 어획강도가 매우 낮은 상태임을 시사한다. 꺽지의 연간 자원량은 3,048 kg으로 나타났으며, 현재 어획개시연령과 적정어획사망계수를($F_{ABC}$)를 바탕으로 한 잠재생산량은 861 kg으로 추정되었다. 가입당 생산량 모델을 사용하여 어획개시연령을 3 age로 어획사망계수는 0.643 $year^{-1}$로 가정할 경우, 가입당 생산량은 현재의 4.12 g에서 13.84 g로 약 3.4배 증가될 것으로 예상되었다.

• 한국초지조사료학회지
• /
• 제38권2호
• /
• pp.112-119
• /
• 2018

출수 후 수확일수에 따라 수량 및 사료가치를 고려해 보면 밀 수량은 출수 후 30일부터 42일까지 유의적으로 증가하였으며(p<0.05), 최대 수량은 42일차에 5.57T/ha이었는데, 39일, 42일차와는 유의적 차이를 보이지 않았다. 사료가치의 경우 조단백, 조섬유, 조회분의 경우 유의적 차이를 보이나, 조지방, TDN의 경우 유의적 차이를 보이지 않았다(p<0.05). 발효에 영향을 주는 pH는 30일부터 39일까지는 pH 3.8-4.2까지 안정을 유지하다가 42일차부터는 pH4.5로 증가하여 일부 품종의 경우 발효에 적합하지 않았다(p<0.05). 따라서 밀의 곡실 발효사료 제조를 위한 최적 수확시기는 출수 후 39일차였다.

• 대한핵의학회지
• /
• 제23권1호
• /
• pp.71-83
• /
• 1989

For the development of $^{99m}Tc-labelled$ antimony sulfide colloid and hydroxyethyl starch, various experiments such as preparation of colloid, control of the distribution of particle size, establishment of labelling conditions, determination of labelling yield and radiochemical purity, examination of stability, and organ imagings of rabbits etc. were carried out. 1) Antimony sulfide colloid was readily prepared by the reaction of aqueous solution of antimony potassium tartrate with hydrogen sulfide generated by treating ferrous sulfide with dilute sulfuric acid. The colloid could be stabilized by adding small amount of polyvinylpyrrolidone. 2) Electron microscopy analysis exhibited the distribution of colloid size in the range of $1\sim15nm$ with a major portion of 9 m. The colloid solution was sterilized by membrane filtration $(0.2{\mu}m)$ and then stored at $4^{\circ}C$. This sterilized colloid was so stable that it was usable at least for one year. 3) The antimony sulfide colloid was labelled by adding sodium $pertechnetate-^{99m}Tc$ solution to the reaction vial, followed by adding hydrochloric acid and then boiled for 30 min. The optimal pH of the reaction mixture was found to be in the range of $1.3\sim1.4$. Instant thin layer chromatography (ITLC) analysis showed high labelling yield of above 99.5%. This labelled colloid maintained high radio-chemical purity of above 99% until 10 hours after labelling. 4) Animal studies showed high uptake of $^{99m}Tc-Sb_2S_3$ colloid at lymph vessels and nodes indicating a suitable agent for lymphoscintigraphy. Satisfactory results were also abtained in other clinical studies. 5) Hydroxyethyl starch (HES $0.6\sim1.0%$) was labelled with $Na^{99m}TcO_4$ in the presence of $SnCl_2$ with high labelling yield of above 99.5%. The optimal pH of the reaction mixture was in the range of $1.8\sim2.0$. $^{99m}Tc-HES$ maintained high radiochemical purity of above 99% until 10 hours after labelling. 6) Animal studies showed that $^{99m}Tc-HES$ migrated more rapidly from the injection sites into the lymph vessels than $^{99m}Tc-Sb_2S_3$ colloid while less amount of the former was uptaken at lymph nodes than that of the latter. Similar phenomenon was also observed in other clinical studies. As a result, $^{99m}Tc-Sb_2S_3$ colloid was found to be more effective lymphoscintigraphic agent than $^{99m}Tc-HES$.

• 공업화학
• /
• 제28권4호
• /
• pp.442-447
• /
• 2017

본 연구에서는 항산화성분을 다량 함유하고 있는 천연물로부터 유효성분을 추출하고, 이를 반응표면분석법을 이용하여 추출공정을 최적화하였다. 또한 감잎과 엉겅퀴로부터 추출된 유효성분의 플라보노이드 함량과 폴리페놀 함량을 측정함으로써 유효성분의 기능성을 평가하였다. 추출공정의 독립변수로는 추출시간, 추출온도, 용매의 비율을 설정하였고, 반응치는 수율, 폴리페놀 함량, 플라보노이드 함량을 확인하였다. 감잎의 경우 추출시간(3.1 h), 주정/초순수 부피비(63.4 vol%), 추출온도($54.6^{\circ}C$)에서 수율(27.7%), 폴리페놀 함량(33.2 mg GAE/g), 플라보노이드 함량(47.8 mg QE/mg dw)의 최적 결과를 얻었으며, 엉겅퀴의 경우에는 추출시간(2.9 h), 주정/초순수 부피비(40.7 vol%), 추출온도($68.4^{\circ}C$)에서 수율(27.0%), 폴리페놀 함량(17.9 mg GAE/g), 플라보노이드 함량(28.8 mg QE/mg dw)으로 예측되었으며, 종합만족도는 71.7%이다.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 2006

The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.300-300
• /
• 2017

'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.