• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.1-7
• /
• 1989

This study was performed to obtain the optimal condition that hydrolyzed exploded pine(Pinus densiflora), oak(Quercus serrata) and birch wood(Betula platyphylla var. japonica) by using sulfuric acid. The results obtained were summarized as follows: In hydrolysis of wood meal with sulfuric acid. maximum yield of sugar appeared that pine was 12 hours. oak and birch were 24 hours with 65% sulfuric acid. Futhermore, when wood meal and exploded woods were hydrolyzed with 65% sulfuric acid at $23^{\circ}C$ for 6 hours(primary hydrolysis), diluted to 3% and hydrolyzed again at $100^{\circ}C$ for 2 hours(secondary hydrolysis), the maximum sugar yield of wood meals were 6 hours. those of higher steam exploded pine wood was 3 hours. of lower steam exploded oak and birch woods were 6 hours. The sugar analyses of exploded wood showed that the amount of arabinose and xylose residue rapidly decreased. content of nemicelluose decreased with increase of steaming time and pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.861-868
• /
• 2020

The use of polyphenol extracts from radiata pine (Pinus radiata) bark as raw materials for bio-foams was investigated along with the optimal NaOH extraction conditions. The targeted yield of alkaline extracts was 60%, and the targeted pH was 11 to 12. The radiata pine bark was composed of 70% of a 1% NaOH extract, which contained mainly polyphenols, such as proanthocyanidin (PA). As the particle size of the bark decreased, the yield of the 1% NaOH extracts increased from 57 to 87%. A range of NaOH concentrations, liquor ratios, and extraction times were explored to establish an economic polyphenol extraction method. More than 60% of the alkaline extract was extracted, and the pH of the extract was approximately 12 when the optimum extraction conditions were employed, i.e., a liquor to bark ratio of 5:1, a NaOH dosage of 17 to 18% based on the bark weight, and a 1 h extraction time. Following neutralization of the alkaline extract, structural analysis indicated severe structural changes in the PA during the alkaline extraction. Because the alkaline extract was barely soluble in the solvent used for the structural analyses, it is assumed that chemical modification is required to increase the solubility of the alkaline extract for the production of bio-foams.

• Journal of Microbiology
• /
• v.40 no.1
• /
• pp.82-85
• /
• 2002

The aerobic batch growth of Issatchenkia orientalis DY252 with glucose and fructose medium was investigated at 32$\^{C}$ and pH 5.0. Aerobic ethanol production was evident with yeast I, orientalis. A diauxic lag of about 1 h between growth on glucose and growth on ethanol during batch culture was observed. However, no diauxic growth occurred with fructose. As the incubation temperature was increased from 32 to 39$\^{C}$, viability at the end of each batch culture declined significantly, from 93 to 43%, Unlike the effect of temperature, viability was not greatly affected by incubation pH, and cell yield values in a range of 0.45-0.48 were obtained. In order to overcome overflow metabolism, a fedbatch culture under glucose limitation was carried out. Compared with aerobic batch culture, about 10% improvement in cell yield was achieved with a fed-batch culture in optimal conditions.

• The Korean Journal of Mycology
• /
• v.20 no.1
• /
• pp.77-82
• /
• 1992

Researches were carried out to find the optimal conditions of carbon sources, nitrogen sources and pH for the maximum production of sporophore of Lentinus edodes. Dextrin, aspartic acid and pH 4.0 were the best conditions for yield of sporophore by using replacement culture technique. The production of sporophore was stimulated by addition of 0.8% triacylglycerol in NS medium. Coffee waste was chosen for the best substrate among the poplar, oak, white aspen saw dust and coffee waste. Increased growth of mycelim and yield of sporophore was obsewed by adding tannin up to 0.1% as substrate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.41-47
• /
• 2003

Recently, interest in utilization plan of recycling paper have been enhanced. Therefore, this research aimed to develop the manufacture process of cellulose acetate using old newsprint by acetosolv pulping process. And the manufactured cellulose acetate was also analyzed, especially based on chemical properties. The summarized results in this research were as follows; Reaction time, kind and amount of catalyst, and ratio of liquor to material were varied during acetosolv pulping process of old newsprint. Ratio of liquor to material did not give the significant difference in reaction product. Delignification rate was increased with increasing reaction time during acetosolv pulping, but yield and degree of substitution decreased with increasing reaction time. Sulfuric acid are better catalyst than hydrochloric acid in acetosolv pulping process for old newsprint, and optimal addition amount of catalyst was 1% based on reaction material. Delignification, yield, and degree of substitution were influenced by the catalyst and reaction time. Under pulping condition of $120^{\circ}C$ in 1/12 liquor to material ratio and 60min, degree of substitution was about 0.7. The acetylation reaction was not completely caused by these reaction condition. The examination of the FT-IR spectra revealed that absorption band(1200$\textrm{cm}^{-2}$, 1,750$\textrm{cm}^{-1}$) caused by carbonyl group were confirmed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2196-2207
• /
• 2017

This paper presents a two-stage market auction model in a pool-based electricity market, which explicitly takes into account the system network security. The security network-constrained market auction model considers the use of corrective control to yield economically efficient actions in the post-contingency state, while ensuring a certain security level. Under this framework, the proposed model shows not only for quantifying the correlation between secure system operation and efficient market operation, but also for providing transparent information on the pricing system security for market participants. The two-stage market auction procedure is formulated using Benders decomposition (BD). In the first stage, the market participants bid in the market for maximizing their profit, and the independent system operator (ISO) clears the market based on social welfare maximization. System network constraints incorporating post-contingency control actions are described in the second stage of the market auction procedure. The market solutions, along with the BD, yield nodal spot prices (NSPs) and nodal congestion prices (NCPs) as byproducts of the proposed two-stage market auction model. Two benchmark systems are used to test and demonstrate the effectiveness of the proposed model.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.421-428
• /
• 1989

A soil bacterium synthesizing an extremely viscous biopolymer was isolated and identified as Pseudomonas delafieldii. The optimal pH and temperature for the growth were 6.5 and 3$0^{\circ}C$, respectively. Maximum specific growth rate was 0.24 h$^{-1}$. The specific polysaccharide productivity, growth yield and product yield were 6.25 mg/g-cell/h, 54.5% and 38.39%, respectively. The polysaccharide was presumed to be $\beta$-glucan containing glucose and gluconolactone (1.9：1.0 in molar ratio) and 1.35 % acetyl group, Element analysis showed that it contained carbon (31.85%) and hydrogen (5.15%). The weight average molecular weight by GPC was 5.64$\times$10$^7$. The intrinsic viscosity was 42.84 dl/g.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.347-350
• /
• 2003

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. At the commercial mushroom cultivation houses, this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted from Jan. 26, 2003 to Aug. 2, 2003. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Maximum temperature difference between the upper and lower growth stage during a heating time zone was about $6^{\circ}C$. The max. and min. relative humidity were ranged approximately $42{\sim}100%$. The $CO_2$ concentration and the illuminance were lowly maintained during growing period. The average yield per bottle was about $54{\sim}102g$.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1678-1683
• /
• 2006

A novel suspension-phase enzyme reaction system for the intermolecular transglycosylation of L-ascorbic acid into 2-O-${\alpha}$-D-glucopyranosyl L-ascorbic acid supplementing extrusion starch as the glycosyl donor was developed using cyclodextrin glucanotransferase from Thermoanaerobacter sp. A high conversion yield compared to the conventional soluble-phase enzyme reaction system using cyclodextrins and soluble starch was achieved. The optimal reaction conditions were 2,000 units of cycIodextrin glucanotransferase, 20 g/l of L-ascorbic acid, and 50 g/l of extrusion starch at $50^{\circ}C$ for 24 h. The new suspension-phase enzyme reaction system also exhibited several distinct advantages other than a high conversion yield, including a lower accumulation of oligosaccharides and easily separable residual extrusion starch by centrifugation or filtration in the reaction mixture, which will facilitate the purification of 2-O-${\alpha}$-D-glucopyranosyl L-ascorbic acid. The new suspension-phase enzyme reaction system seems to be potentially applicable as the industrial process for the production of thermally and oxidatively stable 2-O-${\alpha}$-D-glucopyranosyl L-ascorbic acid.

• Journal of Nutrition and Health
• /
• v.27 no.8
• /
• pp.794-804
• /
• 1994

This study was conducted to investigate the relationship between lactational capacity and intakes of energy and energy-yielding nutrients. Food consumption, intakes of carbohydrate, protein, fat and energy and quantity and proximate composition of milk of 11 lactating Korean mothers were determined at 1, 2 and 3 months postpartum longitudinally. Food consumption was estimated using a 24-hour recall method ; intakes of energy and energy-yielding nutrients were calculated according to the Food Composition Table. Daily milk production was estimated using a 72-hour test-weighing method ; protein, fat, lactose and energy concentrations were analyzed. Average intakes of energy and protein were 1974$\pm$386㎉/day and 67.0$\pm$12.3㎉/day, these were 73% and 74% of the Korean Recommended Allowances, respectively. Average milk yield was 720.1$\pm$123.3ml/day containing energy 59.6$\pm$9.5㎉/dl, protein 1.1$\pm$0.1g/dl, fat 2.7$\pm$0.8g/dl, and lactose 6.3$\pm$0.3g/dl. No relationship existed between the intakes of carbohydrate, protein, fat and energy and the quantity and proximate composition of the milk. However, the intakes of energy, carbohydrate and vegetable protein were inversely related to the concentrations of energy and lactose in the milk. This result indicates that lactational capacity may be affected by the other factors excluding intakes of energy and energy-yielding nutrients and a high intake of energy may not guarantee optimal lactational capacity.