• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.807-812
• /
• 2000

Chlorination dosage in water treatment plant of field is determined by chlorination demand experiment through two or three hours after raw water was sampled in inflow. It is impossible to continuously control fer real time because sampled water is adapted chlorination dosage after water treatment process had been proceeded. Therefore in this study, we will design informal chlorination demand system this designed system will be experimented as to water quality and accuracy of control in various conditions. Throughout these. experimental results, we will revise the system and revised system is enable to optimal control of chlorination dosage. Finally, We have developed chlorination demand system, which can automatically determination of chlorination dosage to be determined according to variety of raw water quality inflow in water treatment plant.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.151-157
• /
• 1999

The study was investigated the improved printing effect of heat transfer ability for the cotton fabric treated with disperse dyes. Some important factors were studied to determine the most optimal conditions such as concentration of dye, treated time and temperature, after treatment and before treatment using swelling agent, and molecular weight of dye. The fastness to laundering and light for heat transfer printing was measured.The optimal conditions of heat transfer printing for cotton fabric treated with disperse dye were concentration of 5% owf, treated temperature of $200^{\circ}C$, treated time of 3 minute. The diffusion of disperse dyes inside cotton fabric was accelerated as a result of swelling agent such as glycerin, ethylene glycol, tetramethylene glycol, propylene glycol using in this study. The effects of heat transfer printing were increased that the increasement of before treatment time for swelling agent, decrease of molecular weight of dye.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.1
• /
• pp.16-22
• /
• 2024

The conventional degreasing process involves removing oil and contaminants at temperatures above 80℃, resulting in excessive energy consumption, increased process costs, and environmental issues. In this study, we aimed to find the optimal degreasing conditions for the pre-treatment process of electro-galvanizing cold-rolled steel sheets, conducted efficiently at room temperature without the need for a separate heating device. To achieve this, we developed a room temperature degreasing solution and a brush-type degreasing tool, aiming to reduce energy consumption and normalize the decrease in degreasing efficiency caused by temperature reduction. Alkaline degreasing solution were prepared using KOH, SiO₂, NaOH, Na₂CO₃, and Sodium Lauryl Sulfate, with KOH and NaOH as the main components. To enhance the degreasing performance at room temperature, we manufactured additives including sodium oleate, sodium stearate, sodium palmitate, sodium lauryl sulfate, ammonium lauryl sulfate, silicone emulsion, and EDTA-Na. Room temperature additives were added to the alkaline degreasing solution in quantities ranging from 0.1 to 20 wt.%, and the uniformity of degreasing and the adhesion of the galvanized layer were evaluated through Dyne Test, T-bending Test, OM, SEM, and EDS analyses. The results indicated that the optimal degreasing solution composition consisted of NaOH (30 g/L), Na₂CO₃ (30 g/L), SLS (6 g/L), and room temperature additives (≤1 wt%).

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.306-312
• /
• 2006

Disposal of food garbage in most large cities is very troublesome task. To date, microbiological treatment has been received an attention as a garbage decomposition process. In this study, the inoculation effect of some cellulase, amylase and protease-producing bacteria and photosynthetic bacteria on food garbage treatment was examined. They were added into a treatment reactor specially designed in this study together with food garbage and incubated in various conditions for 15 days and the removals of food garbage and foul smell produced during the treatment were analyzed. Average decomposition percentages of the inoculated food garbage in treatment reactor were 11 and 18.8% under intermittent aeration (once in a day) and continuous aeration conditions (2 L/min), respectively, and these were higher than removal percentages in the corresponding uninoculated reactors,3.4 and 13.8%. Optimal pH and temperature for food garbage decomposition by inoculated bacteria were pH 7.0 and $30^{\circ}C$. Maximal decomposition percentage in the inoculated food garbage was 35% under the optimal condition (pH 7, $30^{\circ}C$, and continuous aeration). The malodor compounds generated from food garbage treatment such as complex foul smell and sulfur compounds were effectively reduced about 84% and 25.5%, respectively, with a biofilter composed of purple nonsulfur bacteria trapped in sponge. This decomposing capability of food garbage by these bacteria can be utilized for the rapid and efficient treatment of food garbage.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.91-95
• /
• 2005

The purpose of this study is to investigate the improvement of fiber surface, physical properties and research the physical properties and dyeability of cotton fabrics treated with KOH solution at low and high temperature. The treatment conditions for mercerization with KOH were changed various temperatures(25, $90^{\circ}C$), concentrations(15, 20, 25, 30%. w/v) and times(30, 60, 180, 300sec). The effects of mercerization after KOH treatment estimated with tensile strength, tearing strength, shrinkage, drape stiffness, moisture regain, fiber surface, and dyeability. The optimal conditions were concentration of KOH 20%, time 180sec in low temperature and concentration of KOH 20%, time 60sec in high temperature. The results are as follows; Tensile strength, tearing strength and moisture regain were much improved than those of untreated cotton fabric. Shrinkage and drape stiffness of KOH treated cotton were more increased at $25^{\circ}C$ than $90^{\circ}C$. Fiber surface showed more rounded shape at $25^{\circ}C$ than $90^{\circ}C$. Dyeability of cotton fabrics improved by KOH treatment.

• Journal of Korea Foundry Society
• /
• v.36 no.3
• /
• pp.88-94
• /
• 2016

We investigated the effect of heat treatment on an ADC12 alloy produced using diecasting. The heat treatment used in this study was a typical T6 process: a solid solution treatment followed by an artificial aging treatment. As-cast specimens were solid-solution-treated at $500^{\circ}C$ and $530^{\circ}C$ for 1-16 hr, and aged at $160^{\circ}C$ and $180^{\circ}C$ for 1-8 hr. Microstructural changes in the alloy during the heat treatment were observed. Changes in mechanical properties of the alloy were measured using a micro-Vickers hardness tester. Finally, we determined the optimal heat treatment conditions for the diecast ADC12 alloy.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.51-57
• /
• 2000

An automotive wheel bearing is one of the most important components to guarantee the service life of a passenger car. The endurance lift of a bearing is affected by many parameters such as material properties, heat treatment, lubrication conditions, temperature, loading conditions, geometry, internal clearance and so on. Under the same geometry and loading conditions, the internal clearance is the most effective parameters on the endurance lift of a bearing. Generally, bearings have the longest lift with a little negative internal clearance. But it is very difficult to measure and modify the internal clearance after a wheel bearing is assembled. In this paper, we analyze the effect of an assembling procedure on the clearance of wheel bearings and suggest a method to determine optimal clearance for automotive wheel bearings by selecting initial bearing clearance.

• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.333-341
• /
• 2008

In this study, the possibility and the optimal conditions for treating slurry type piggery wastewater using supercritical water oxidation were tested in the laboratory. The results could be summarized as follows; The slurry type piggery wastewater, which was diluted 50 times, was treated most effectively at the pressure of 300 bar, the temperature of $550^{\circ}C$ and the residence time of 10 minutes. The air saturated water was injected, as an oxidizing agent, and the removal efficiencies of $COD_{Cr}$, T-N, $NH_4^+$-N and T-Pattheoptimal conditions were 92, 40, 59 and 100%, respectively. Therefore, analte rnativemea suremu stbetaken to improve theremo valefficiency of the nitrogen compounds.

• Journal of Adhesion and Interface
• /
• v.5 no.3
• /
• pp.1-9
• /
• 2004

Using the methods which described in ISO 4588, ASTM D2651 and the selected literature, we investigated the best conditions of acid treatment for stainless steel and carbon steel. The acid treatments were conducted with four different acid solutions which were prepared for stainless steel and carbon steel specimen. We observed the contact angle and morphology and roughness of the metal surface and the thickness change at various treatment conditions as treatment temperature and time. Also, we investigated the characteristics of the surface aging according to air exposure after surface treatment. As a result, the optimal temperature of the acid treatment for stainless steel and carbon steel were each obtained at $83^{\circ}C$ and $63^{\circ}C$. Also, it was confirmed that the acid treatments for the metal surface were accompanied with the decrease of thickness and the change of surface morphology due to significant erosion that depend on treatment methods. And also, it was characterized that the aspect of surface aging by air exposure was highly depended on the method of acid treatment.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.82-92
• /
• 2020

Since swine wastewater contains high concentrations of nutrients and heavy metals, it deteriorates water quality when discharged. Compared to conventional methods, bioremediation can be a promising method for its treatment. Specifically, microalgae have the potential to remove these pollutants. In this study, the removal of nutrients (nitrogen (N) and phosphorus (P)) and heavy metals (copper (Cu) and zinc (Zn)) from swine wastewater by Ankistrodesmus bibraianus was evaluated and the organism's optimal growth conditions were investigated. The optimal growth conditions were established at 28℃, pH 7, and light and dark cycles of 14:10 h. The removal efficiencies of N and P by a single treatment (500, 1,000, 5,000, and 10,000 mg L^-1) ranged from 22.9 to 80.6% and from 11.9 to 50.0%, respectively. The removal efficiencies of N and P in the binary treatments ranged from 16.4 to 58.3% and from 7.80 to 49.8%, respectively. The removal efficiencies of Cu and Zn by a single treatment(10, 30, and 50 mg L^-1) ranged from 15.5 to 81.5% and from 6.28 to 34.3%, respectively. Similarly, the removal efficiencies of Cu and Zn in the binary treatments ranged from 16.7 to 74.5% and from 5.58 to 27.5%, respectively. In addition, the study showed the optimal growth conditions for microalgae and the removal efficiency of nutrients (N and P) and heavy metals (Cu and Zn), which could be applied to swine wastewater. Based on the results in this study, it appears that Ankistrodesmus bibraianus could be used for the removal of nutrients and heavy metals present in swine wastewater.