• Journal of agriculture & life science
• /
• v.46 no.3
• /
• pp.47-58
• /
• 2012

This study was carried out to develop assessment model for the optimal site prediction of Dendropanax morbifera, Evergreen broad-leaved trees in warm temperate zone according to climate change. It was created criterion for assessment model of the optimal site prediction by quantification method to possible analysis of quantitative and qualitative data, through study relationship between growth of tree and site environmental factors. A program of the optimal site prediction was developed using program version 3.2, an Avenue and Dialog Designer tool of ESRI as GIS(geographic information system) engine. Developed program applied to test accuracy of the optimal site prediction in study area of Wando, Jeollanam-do, having a various evergreen broad-leaved trees of warm temperate zone. In the results from analysis of the optimal site prediction on Dendropanax morbifera, the characteristics of optimal site were analyzed site environmental features with 401~500m of altitude, $15^{\circ}$ of slope, hillside of local topography, alluvium of deposit type, convex of slope type and south of aspect. The mapping area per grade of the optimal site prediction in the Dendropanax morbifera showed 1,487.2ha(25.4%) of class I, 1,020.3ha(17.4%) of class II, 2,231.8ha(38.2%) of class III and 1,110.5ha(19.0%) of class IV.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.319-330
• /
• 2015

This study was carried out to predict the optimal growth site and estimate carbon stocks of Quercus acuta, evergreen broad-leaved trees in warm temperate zone according to climate change. The criterion for the optimal site prediction was created by quantification method with quantitative and qualitative data, collected from growth factors of stands and environmental factors of survey sites of 42 plots in Q. acuta by study relationship between growth of tree and site environmental factors. A program for the optimal site prediction was developed by using GIS engine tools. To prediction of the suitable growth site of Quercus acuta, developed program in this study applied to Wando in Jeollanam-do, distributing a various evergreen bread-leaved trees of warm temperate zone. In the results from analysis of the optimal site prediction on Q. acuta, the characteristics of the optimal site showed as follows; site environmental features of class I (the best site class for Q. acuta) was defined as 401 ~ 500 m of altitude, $21{\sim}25^{\circ}$ of slope with above hillside, residual of deposit convex of slope type with west of aspect. The area and carbon stocks of optimal site prediction by class for Q. acuta in classI showed 147.1 ha (2.5%), total 316.5 tC/ha, total $1,161tCO_2/ha/yr$ of class I, 2,703.5 ha (46.3%), total 5,817.4 tC/ha, total $21,331tCO_2/ha/yr$ of class II, 2,845.5 ha (48.6%), total 6,123.0 tC/ha, total $2,845.5tCO_2/ha/yr$ of class III and 153.7 ha (2.6%), total 330.7 tC/ha, total $1,213.7tCO_2/ha/yr$ of class IV.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.957-969
• /
• 2020

The primary objective of this study is to develop a determination system for an optimal combination of earthwork equipment that improves the traditional way in convenience, prediction accuracy, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)technology development trend analysis, 3)develop a determination system for the optimal combination of earthwork equipment, 4)simulation of a developed system. As a result, core considerations are deducted for the development of a determination system. Furthermore, site simulation is performed using a developed system. Site simulation result, Cluster 1(R1200LC 7㎥, CAT 775G 65ton×2) was selected from 6 clusters because of its production cost (￦491/㎥). It is expected that the application range and impact on the construction industry will be enormous due to the availability of the developed system.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.786-792
• /
• 2009

A kernel in support vector machines can be described as a similarity measure between data, and this measure is used to find an optimal hyperplane that classifies patterns. It is therefore important to effectively incorporate the characteristics of data into the similarity measure. To find an optimal similarity between amino acid sequences, we propose a real exponent exponential form of the two metrices, which are derived from the evolutionary relationships of amino acids and the hydrophobicity of amino acids. We prove that the proposed metric satisfies the conditions to be a metric, and we find a relation between the proposed metric and the metrics in the string kernels which are widely used for the processing of amino acid sequences and DNA sequences. In the prediction experiments on the cleavage site of the signal peptide, the optimal metric can be found in the proposed metrics.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.15-26
• /
• 2004

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation. The optimal regionalization of the precipitation data were classified by the above mentioned regionalization for all over the regions except Jeju and Ulleung islands in Korea. Design rainfalls following the consecutive duration were derived by the regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root mean square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared between the regional and at-site frequency analysis. It has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design rainfall. Consequently, optimal design rainfalls following the classified regions and consecutive durations were derived by the regional frequency analysis using Generalized extreme value distribution which was identified to be more optimal one than the other applied distributions. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.5
• /
• pp.41-53
• /
• 2002

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation suggested by the first report of this project. According to the regions and consecutive durations, optimal design rainfalls were derived by the regional frequency analysis for L-moment in the second report of this project. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized extreme value (GEV) distribution among applied distributions. regional and at-site parameters of the GEV distribution were estimated by the linear combination of the higher probability weighted moments, LH-moment. Design rainfall using LH-moments following the consecutive duration were derived by the regional and at-site analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared in the regional and at-site frequency analysis. Consequently, it was shown that the regional analysis can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than at-site analysis in the prediction of design rainfall. Relative efficiency (RE) for an optimal order of L-moments was also computed by the methods of L, L1, L2, L3 and L4-moments for GEV distribution. It was found that the method of L-moments is more effective than the others for getting optimal design rainfall according to the regions and consecutive durations in the regional frequency analysis. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• Journal of Korean Academy of Nursing
• /
• v.40 no.6
• /
• pp.844-851
• /
• 2010

Purpose: This study was conducted to assess optimal needle length for gluteal intramuscular injections (IM) via simple skinfold thickness (SFT). Methods: For this study, 190 healthy adults were recruited and grouped into eight groups according to gender and body mass index (BMI) (kg/$m^2$). The Korean Society for the Study of Obesity criteria defines a BMI under 20 as underweight, 20.1-22.9 as normal, 23-24.9 as overweight and over 25 as obese. For each participant, the SFT of dorsoguteal (DG) and ventrogluteal (VG) sites were measured using a caliper. Subcutaneous tissue thickness was acquired through ultrasonic images. Results: For men in the overweight and obese groups at the DG site, for the obese group at the VG site, and for women in the normal weight, overweight and obese groups at both sites, the mean subcutaneous tissue thickness exceeded 1.84 cm, the minimal length for a 1 inch needle used for IM. At the DG site, optimal intramuscular needle length (OINL) was 1.4 times in women and 1.0 times in men compared to SFT. At the VG site, OINL was 1.3 times in women and 0.9 times in men compared to SFT. Conclusion: The results of this study suggest that SFT is a reliable index to determine optimal needle length with minimal effort prior to IM.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.97-109
• /
• 2003

This study is mainly conducted to derive the design drought rainfall by the consecutive duration using probability weighted moments with rainfall in the regional drought frequency analysis. It is anticipated to suggest optimal design drought rainfall of hydraulic structures for the water requirement and drought frequency of occurrence for the safety of water utilization through this study. Preferentially, this study was conducted to derive the optimal regionalization of the precipitation data that can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. Five homogeneous regions in view of topographical and climatological aspects were accomplished by K-means clustering method. Using the L-moment ratio diagram and Kolmogorov-Smirnov test, generalized extreme value distribution was confirmed as the best fitting one among applied distributions. At-site and regional parameters of the generalized extreme value distribution were estimated by the method of L-moments. Design drought rainfalls using L-moments following the consecutive duration were derived by the at-site and regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design drought rainfall derived by at-site and regional analysis in the observed an simulated data were computed and compared. In has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE. RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design drought rainfall. Consequently, optimal design drought rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.237-240
• /
• 2002

Design rainfall using LH-moments following the consecutive duration were derived by the regional and at-site analysis using the observed and simulated data resulted from Monte Carlo techniques. RRMSE, RBIAS and RR in RRMSE for the design rainfall were computed and compared in the regional and at-site frequency analysis. Consequently, it was shown that the regional analysis can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than at-site analysis in the prediction of design rainfall. RE for an optimal order of L-moments was also computed by the methods of L, L1, L2, L3 and L4-moments for GEV distribution. It was found that the method of L-moments is more effective than the others for getting optimal design rainfall according to the regions and consecutive durations in the regional frequency analysis. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• Earthquakes and Structures
• /
• v.22 no.1
• /
• pp.53-64
• /
• 2022

This study proposes an intelligent semi-active isolation system combining a variable-stiffness control device and ground motion characteristic prediction. To determine the optimal control parameter in real-time, a genetic algorithm (GA)-fuzzy control law was developed in this study. Data on various types of ground motions were collected, and the ground motion characteristics were quantified to derive a near-fault (NF) characteristic ratio by employing an on-site earthquake early warning system. On the basis of the peak ground acceleration (PGA) and the derived NF ratio, a fuzzy inference system (FIS) was developed. The control parameters were optimized using a GA. To support continuity under near-fault and far-field ground motions, the optimal control parameter was linked with the predicted PGA and NF ratio through the FIS. The GA-fuzzy law was then compared with other control laws to verify its effectiveness. The results revealed that the GA-fuzzy control law could reliably predict different ground motion characteristics for real-time control because of the high sensitivity of its control parameter to the ground motion characteristics. Even under near-fault and far-field ground motions, the GA-fuzzy control law outperformed the FPEEA control law in terms of controlling the isolation layer displacement and the superstructure acceleration.