• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.515-522
• /
• 1991

Determining the motion using optimal technique about traveling time and trajectory planning has been studied often in recent years, but the study of determining the optimal robot dimensions is rare, the authors attempt to find out the least driving torques and energy as the optimization of link length ratio referred to 2R SCARA and 3R robot manipulators. For the given linear path with triangular velocity profile, the inverse kinematic and dynamic problems are examined in order to lead into solution of problem, which is suggested for optimal design of link lengths. Accordingly, optimal link length ratio is obtained with respect to each case.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.73-78
• /
• 2002

This study examines self-compacting of concrete using Ground Calcium Carbonate(GCC) gathering in limestone mine of Banyans district in order to make self-compacting concrete in the range of design strength 300kgf/cm$^2$ and the optimal mix proportion of self-compacting concrete that can use in field structure. The result shows that the optimal GCC replacement ratio is 45$\pm$5% in the normal strength of design strength 300kgf/cm$^2$ and that the volume ratio of the optimal fine aggregate used as the way satisfying both viscosity and compacting ability without separating materials is 46%. The optimal volume ratio of the coarse aggregate considering the economical aspect of concrete is 50%. It is desirable that the optimal mix proportion satisfying self-compacting for replacement of GCC is decided through mix design according to each replacement ratio.

• Smart Structures and Systems
• /
• v.10 no.6
• /
• pp.573-591
• /
• 2012

In this study, a procedure to design an optimal LCVA that maximizes the equivalent damping ratio added to the primary structure subjected to along-wind excitation is proposed. That design procedure does not only consider the natural frequency and damping ratio of the LCVA, but also the proportion of the U-shaped liquid, which is closely related to the participation ratio of the liquid mass in inertial force. In addition, constraints to ensure the U-shape of the liquid are considered in the design process, so that suboptimal solutions that violate the optimal tuning law partly are adopted as a candidate of the optimal LCVA. The proposed design procedure of the LCVA is applied to the control of the 76-story benchmark building, and the optimal proportions of the liquid shape under various design conditions are compared.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.135-142
• /
• 2017

This study employs an analytical mathematical model to estimate the optimal debt ratio of Korean agricultural corporations, more sensitive to the government debt ratio policy compared to other industries, and the estimation of the optimal debt ratio based on objective data. The analytical model utilizes the equation for ROE, with the debt ratio as an independent variable, and related parameters include ROS, TAT, and NFCL. Regarding the NFCL, the optimal debt ratio standard is defined as the debt ratio that maximizes the ROE by analytical procedures such as adding an equation concerning the debt ratio and a linearity relationship to the analytical model, and from these equations, a quadratic equation with the debt ratio as an independent variable describes the ROE. This methodemploys fourteen years of corporate data. Results show that 138% of debt ratio is the optimal debt ratio to increase the ROE of the corporations, which implies that the existing debt ratio of Korean agricultural corporations is higher than optimal. Consequently, it is required for authorities to change future debt ratio policies in view that the purpose of debt ratio management is to maintain safety and increase profitability.Management should emphasize characteristics of the specific industry rather than standardized judgements based on numerical indexes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.101-108
• /
• 1997

The initial token value required to the optimal performance of discrete event systems can be decided by Sum of Delay Time and Synchronic Time ratio, which are new synchronic variables in Timed Place Petri Nets. For the system consisting of two Live-and-Bounded circuits(LB-circuits) fused in common Transition-Transition-Path or common Place-Place-Path, we prove that the Synchronic Time Ratio is the initial token ratio between two LB-circuits to optimally perform system functions. These results are generalized and formulated as a theorem. The initial tokens of a specific place can imply shared resources. Using the theorem, we can decide the minimum number of the shared resources to obtain the optimal performance, and minimize the idling time of resources. As an example, an automated assembly system is modeled by Timed Place Petri Net, and the initial tokens to achieve the optimal system performance are identified. All the values are verified by simulation.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.92-97
• /
• 2001

Hardening agents have been the traditional material for surface soil stabilization of soft ground. This study aims at determining the optimal mixture ratio of the hardening agent in accordance with the required design specifications. Hardening agents which consists of fly ash, gypsum, slag and cement for the ettringite hydrates is effective for early stabilization of unconsolidated soil. The raw ground material is the clay that is widely found in Korea. In this study, preliminary tests were performed to get an optimal mixture ratio of the stabilizer ingredient and marine clay from Jinhae was used to get physical and chemical properties. Laboratory tests of 50 stabilized soils were performed to get an optimal mixture ratio for 16-stabilizer materials of 6 types, and a mixture ratio of the stabilizer ingredient and marine clay was determined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.25-33
• /
• 1998

An experimental study has been carried out to obtain optimal conditions for turbulent mixing of two fluid streams at various angle branches by a flow visualization method. The main purpose of this study is the utilization of flow visualization method as a fast and efficient way to find the optimal mixing conditions when several flow control parameters are superimposed. It is verified that the optimal conditions estimated by flow visualization method have good agreement with the concentration field measurements. The results demonstrate that the diameter ratio is mainly attributed to the mixing phenomena than the branch pipe angle and the Reynolds number. The most striking fact is that there exists the best diameter ratio, d/D.ident. O.17, which requires the minimum momentum ratio in the range of the present experiment. The velocity ratio for the optimal mixing condition has a value within 2 to 16 according to the different flow parameters.

• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.111-121
• /
• 2015

A correct information of customer returns ratio under e-commerce is not always shared between supply chain (SC) members. Also, it is important issue for SC members to handle the unsold products in a market. This paper discusses the impact of information sharing of customer returns ratio on an optimal sales strategy including resale of customer returns and buyback policy for a SC under e-commerce with a manufacturer and a retailer. A retailer sells a single product and resells the resalable customer returns in the same market. A manufacturer produces the products and buys back the unsold products as to their quality from the retailer. The integrated SC (ISC) determines the optimal product order quantity to maximize the expected profit of the whole SC. The decentralized SC (DSC) makes the optimal decisions for order quantity and the wholesale price of products to maximize the expected profit of each SC member. The effect of information sharing is discussed between SC members under ISC and DSC. The analysis numerically investigates how information sharing of the returns ratio affects the optimal decision and the expected profits under ISC and DSC. Besides, effect of SC coordination to encourage the shift to ISC is discussed.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.39-47
• /
• 2015

Objective : The purpose of this study was to investigate the velocity conversion coefficient and invariance for the optimal phase ratio on the performance of the women's triple jump. Methods : Three-dimensional kinematic data were obtained from the three finalists of the women's triple jumper competition at the 2011 Daegu IAAF World Championships. Computer simulations were performed using the biomechanical model of the triple jump to optimize the phase ratio for the longest actual distance for all athletes with altered velocity conversion coefficients. Results : Top elite triple jumpers showed better technical consistency at the phase ratio. Also, no consistent relationship was observed between the loss in horizontal velocity and the gain in vertical velocity across supporting the three phase. In addition, regardless of the magnitude A1, all athletes were optimized with jump-dominated technique. Finally, as the magnitude of A1 increased, the athletes showed better performance. The obtained overall distance jumped showed the longest actual distance when the optimal phase ratio was transferred from hop-dominated to jump-dominated(the step ratio was 30%~31%), and when the optimal phase ratio was transferred from balanced to jump-dominated(the step ratio was 27%~29%). Conclusion : Future studies need to be conducted in order to explore the active landing motion and the inclination angle of the body with the velocity conversion coefficient simultaneously at each supporting phase.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.05a
• /
• pp.483-492
• /
• 2000

In this paper, we explore the economic principle behind the revenue-sharing rule for interconnection charges. First, we assert that firms can collude by splitting tile revenues equally i.e., choosing the revenue-sharing ratio equal to l/2. Also, we characterize the optimal revenue-sharing ratio in a model of horizontal interconnection and discuss the relation between the optimal ratio and the optimal access price.