• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.255-263
• /
• 2009

In this paper, we propose an adaptive beacon scheduling algorithm to control a reception period of actual data according to variation of amount of traffic in IEEE 802.15.4 LR-WPAN(Low Rate-Wireless Personal Area Network) with the cluster-tree topology. If a beacon interval is shortened, the amount of the traffic a node receives can be increased while consumption of the energy can be also increased. In this sense, we can achieve optimal on orgy consumption by controlling the beacon interval when the amount of data to be received is being decreased. The result of simulation using NS-2 shows that the proposed algorithm improves performances in terms of packet loss rate and end-to-end delay compared with algorithm using a fixed beacon interval. For a design of cluster-tree based LR-WPAN managing delay-sensitive services, the proposed algorithm and the associated results can be applied usefully.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.2989-2994
• /
• 2000

A mechanical face seal is a tribo-element intended to control leakage of working fluid at the interface of a rotating shaft and its housing. Leakage of working fluid decreases drastically as the clearance between mating seal faces gets smaller. But the very small clearance may result in an increased reduction of seal life because of high wear and heat generation. Therefore, in the design of mechanical face seals a compromise between low leakage and acceptable seal life is important, ant it present a difficult and practical design problem. A fluid film or sealing dam geometry of the seal clearance affects seal lubrication performance very much, and thereby is optimization is one of the main design consideration. in this study the Reynolds equation for the sealing dam of mechanical face seals is numerically analyzed, using the Galerkin finite element method, which is readily applied to various seal geometries, to give lubrication performances, such as opening force, restoring moment, leakage, and axial and angular stiffness coefficients. Then, to improve the seal performance an optimization is performed, considering various design variables simultaneously. For the tested case the optimization ha successfully resulted in the optimal design values of outer and inner seal radii, coning, seal clearance, and balance radius while satisfying all the operation subjected constraints and design variable side-constraints, and improvements of axial and angular stiffness coefficients by 16.8% and 2.4% respectively and reduction of leakage by 38.4% have been achieved.

• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.45-68
• /
• 2009

An aim of the study is to develop an efficient numerical simulation technique that can handle the two-scale analysis of fluid permeation filters fabricated by the partial sintering technique of small spherical ceramics. A solid-fluid mixture homogenization method is introduced to predict the mechanical characters such as rigidity and permeability of the porous ceramic filters from the micro-scale geometry and configuration of partially-sintered particles. An extended finite element (X-FE) discretization technique based on the enriched interpolations of respective characteristic functions at fluid-solid interfaces is proposed for the non-interface-fitted mesh solution of the micro-scale analysis that needs non-slip condition at the interface between solid and fluid phases of the unit cell. The homogenization and localization performances of the proposed method are shown in a typical two-dimensional benchmark problem whose model has a hole in center. Three-dimensional applications to the body-centered cubic (BCC) and face-centered cubic (FCC) unit cell models are also shown in the paper. The 3D application is prepared toward the computer-aided optimal design of ceramic filters. The accuracy and stability of the X-FEM based method are comparable to those of the standard interface-fitted FEM, and are superior to those of the voxel type FEM that is often used in such complex micro geometry cases.

• Journal of the Korean Society for Library and Information Science
• /
• v.35 no.4
• /
• pp.97-122
• /
• 2001

This empirical study investigated the effect of choice of record field(s) upon which to search on retrieval performance for a large operational bibliographic database. The query terms used in the study were identified algorithmically from each target set in four different ways: (1) controlled terms derived from index term frequency weights, (2) uncontrolled terms derived from index term frequency weights. (3) controlled terms derived from inverse document frequency weights, and (4) uncontrolled terms based on universe document frequency weights. Su potable choices of record field were recognised. Using INSPEC terminology, these were the fields: (1) Abstract. (2) 'Anywhere'(i.e., ail fields). (3) Descriptors. (4) Identifiers, (5) 'Subject'(i.e., 'Descriptors' plus Identifiers'). and (6) Title. The study was undertaken in an operational web-based IR environment using the INSPEC bibliographic database. The retrieval performances were evaluated using D measure (bivariate in Recall and Precision). The main findings were that: (1) there exist significant differences in search performance arising from choice of field, using 'mean performance measure' as the criterion statistic; (2) the rankings of field-choices for each of these performance measures is sensitive to the choice of query : and (3) the optimal choice of field for the D-measure is Title.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.179-186
• /
• 2008

In this paper we analyse the effects of Bayesian algorithm in teaming class imbalance problems and compare the performance evaluation methods. The teaming performance of the Bayesian algorithm is evaluated over the class imbalance problems generated by priori data distribution, imbalance data rate and discrimination complexity. The experimental results are calculated by the AUC(Area Under the Curve) values of both ROC(Receiver Operator Characteristic) and PR(Precision-Recall) evaluation measures and compared according to imbalance data rate and discrimination complexity. In comparison and analysis, the Bayesian algorithm suffers from the imbalance rate, as the same result in the reported researches, and the data overlapping caused by discrimination complexity is the another factor that hampers the learning performance. As the discrimination complexity and class imbalance rate of the problems increase, the learning performance of the AUC of a PR measure is much more variant than that of the AUC of a ROC measure. But the performances of both measures are similar with the low discrimination complexity and class imbalance rate of the problems. The experimental results show 4hat the AUC of a PR measure is more proper in evaluating the learning of class imbalance problem and furthermore gets the benefit in designing the optimal learning model considering a misclassification cost.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.149-156
• /
• 2017

This study investigates fire-retardant performances and combustion/thermal characteristics of fire-retardant treated wood by comparing them with those of fire-retardant untreated wood from the expreimental resutls of cone calorimeter and thermo-gravimetric(TG) analyzer. Hazardousness of combustion product gases for fire-retardant treated wood and untreasted wood were also observed from the results of internal finish material incombustibility test according to the Korea standard code of KS F 2271. In this study, we also tried to improve the fire retardant performance of wood by applying fire-retardant chemical composites, and to secure the fire safety performance in buildings. Red pine (Pinus densiflora) was selected as a test specimen because it is mostly used as a building material in Korea. Fire retardant chemical composites (FRCs) were prepared by mixing boron, phosphorous, and nitrogen species and treated by press-impregnation method. Water-based FRCs were composed of 3% boric acid($H_3BO_3$), 3% borax decahydrate($Na_2B_4O_7$), 8% ammonium carbonate($(NH_4)_2CO_3$), diammonium phosphate ($(NH_4)_2HPO_4$) varied from 10-30% and potassium carbonate($K_2CO_3$) varied from 10-30%. From the test results of cone calorimeter, TG analysis and gas hazard assessments, newly proposed were the optimal composition and production methods of FRCs which can sufficiently meet fire-retardant level 3 based on Korea law of construction. Thus, the FRCs, developed in this study, are anticipated to contribute to the improvement of fire safety and widespread of usage in wood as building materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.148-156
• /
• 2018

This study was conducted to evaluate dietary hydrolyzed pig bristle meal (PBM) for juvenile olive flounder Paralichthys olivaceus. In Experiment 1 (EXP-1), six experimental diets were prepared to contain 0, 3, 6, 9, 12 and 15% PBM (designated Con, PBM3, PBM6, PBM9, PBM12 and PBM15, respectively). Triplicate groups of olive flounder (initial body weight, 8.69 g) were fed the diets to apparent satiation for 8 weeks during the optimal water temperature season ($20.5{\pm}2.12^{\circ}C$). All PBM supplemented groups except for PBM3 showed significantly lower growth performance and feed utilization compared to the control group. The protein digestibility of PBM3, PBM6, and PBM9 diets did not significantly differ from that of the control diet. In Experiment 2, 1% mono-calcium phosphate was added into the experimental diets used in Exp-1. Triplicate groups of olive flounder (10.6 g) were fed the diets to apparent satiation for 8 weeks during the low water temperature season ($12.5{\pm}1.12^{\circ}C$). The growth performances and feed utilization of fish fed all diets except for PBM15 diet did not significantly differ from those of the control diet. This study indicates that hydrolyzed PBM can replace fish meal by up to 12% with limiting amino acids and mono-calcium phosphate in diets for juvenile olive flounder.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1444-1451
• /
• 2016

This paper proposes a Tabu search algorithm to minimize the required energy to send data between a source and a destination using the cooperative communication in wireless ad hoc networks. As the number of nodes in wireless ad hoc networks increases, the amount of calculation for establishing the path between nodes would be too much increased. To obtain the optimal cooperative path within a reasonable computation time, we propose a new Tabu search algorithm for a high-density wireless network. In order to make a search more efficient, we propose some efficient neighborhoods generating operations of the Tabu search algorithm. We evaluate those performances through some experiments in terms of the minimum energy required to send data between a source and a destination as well as the execution time of the proposed algorithm. The comparison results show that the proposed algorithm outperforms other existing algorithms.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.728-739
• /
• 2005

An experiment and simulation were performed for hydrogen separation of mixtures by PSA (pressure swing adsorption) process on activated carbon. The binary ($H_2/Ar$; 80％/ 20％) and ternary ($H_2/Ar/CH_4$; 60％/ 20％/ 20％) mixtures were used to study the effects of feed composition. The cyclic performances such as purity, recovery, and productivity of 2bed-6step PSA process were experimentally and theoretically compared under non-isothermal and non-adiabatic conditions. The develped process produced the hydrogen with 99％ purity and 75％ recovery from both processes. Therefore, optimal separation condition was referred multicomponent gas mixtures.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.470-478
• /
• 2016

Greenhouse gas (GHG) emissions caused by fossil fuels consumption is one of the challenging issues worldwide. Renewable energy source (RES)-based energy supply system can be a promising alternative to the current fossil fuel-based system. In this study, we propose an optimization approach for designing a stand-alone hybrid energy supply system using RES and evaluating economic performances of the energy systems. The suggested approach is used to answer the questions; i) what technology is suitable to various demand sectors in different regions, and ii) how does it cost to meet the demand in term of the levelized costs of energy (LCOE). We illustrate the applicability of the proposed approach by applying to the design problem of energy supply systems for residential, agricultural and commercial sectors of Korea. As the results of LCOE analysis, for the residential sector has the LCOE ranging of $0.37~$0.44/kWh, the agricultural sector of $0.15~$0.61/kWh and the commercial sector of $0.12~$0.28/kWh.