• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.453-461
• /
• 2008

In this paper, new inspection method is proposed for the surfaces of lead frame and IC's. Optimal optical system and the accurate algorithm for the surface inspection are needed in machine vision area. The proposed optical system is composed of rectangular oblique light illumination and coaxial light illumination for the higher contrast and the results shows the better performances through experiments. The markings of IC surface are inspected using the accurate proposed method using the partitioned correlation coefficient, and the result shows reduction of under kill ratio compared to the previous method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.701-708
• /
• 2017

This paper proposes an optimum design method using Teaching-Learning-based optimization for the fuzzy PID controller of Magnetic levitation rail-guided vehicle. Since an attraction-type levitation system is intrinsically unstable, it is difficult to completely satisfy the desired performance through the conventional control methods. In the paper, a fuzzy PID controller with fixed parameters is applied and then the optimum parameters of fuzzy PID controller are selected by Teaching-Learning optimization. For the fitness function of Teaching-Learning optimization, the performance index of PID controller is used. To verify the performances of the proposed method, we use a Maglev model and compare the proposed method with the performance of PID controller. The simulation results show that the proposed method is more effective than conventional PID controller.

• Journal of applied mathematics & informatics
• /
• v.32 no.3_4
• /
• pp.539-546
• /
• 2014

This paper introduces the approximation and a proposed method to deal the optimum location network selection problem such that the total cost is minimized. For the proposed method, we derived a feasible solution and the variance. To compare the performances of the approximation and the proposed method, computer simulation is also implemented. The result showed the solutions being optimum with 74% for the proposed method and 57% for the approximation. When the solutions is not optimum, maximum and average deviations are below 4% and 2% respectively. The results indicate a slightly better performance of the proposed method in a certain case.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2004

This paper presents an approach to optimally design the air bearing surface (ABS) of the head slider by using the approximation methods. The reduced basis concept is used to reduce the number of design variables. In the numerical calculation, the progressive quadratic response surface modeling (PQRSM) is used to handle the non-smooth and discontinuous cost function. A multi-criteria optimization problem is formulated to enhance the flying performances over the entire recording band during the steady state and track seek operations. The optimal solutions of the sliders, whose target flying heights are 12 nm and 9 nm, are automatically obtained. The flying heights during the steady state operation become closer to the target values and the flying height variations during the track seek operation are smaller than those for the initial one. The pitch and roll angles are also kept within suitable ranges over the recording band.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.453-458
• /
• 2000

Design of an in-process feedback control system has been studied for precision grinding. A grinding system consists of a grinding tool, a turn table and a disk-shaped workpiece on the table is taken as an object. A grinding process model has been deduced which gives some reasoning about the process errors. In the control system the tool position is actively controlled by an electro-magnetic actuator in-process. The ground error is feedback to compose a closed-loop control system and an optimal PID controller is applied. Some control performances such as transient response and disturbance such as transient response and disturbance attenuation have been examined, which convinces the effectiveness of the control. Some methods for implementation of the control. Some methods for implementation of the control have been suggested from a standpoint of practical application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.635-637
• /
• 2012

In Gen-2 Q-algorithm, the value of initial $Q_{fp}$ and weight C is not defined in the standard. If we let the initial $Q_{fp}$ be large or small, the number of empty slot will be large during the initial query round or almost all the slots will be collided, respectively. Also, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, it is anticipated that the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we analyze how the performances of Gen-2 Q-algorithm will be affected by the weight and initial slot-count size.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.341-345
• /
• 1998

This paper presents performance and loss analysis of Auxiliary Resonant Commutation Snubber-linked (ARCS) three phase voltage source soft switching inverter which is operated under a condition of Zero Voltage Switching (ZVS). The system performances of this ARCS soft switching inverter which is controlled on optimal type I digital servo scheme are illustrated and evaluated on the basis of experimental results.

• KSBB Journal
• /
• v.6 no.1
• /
• pp.15-25
• /
• 1991

The optimal glucose concentration for the high-density culture of recombinant yeasts was obtained using dynamic simulation. An adaptive and predictive algoritilm complimented by the rule base was proposed for the control of the fed-batch fermentation process. The measurement of process variables has relatively long sampling period and relatively long time delay characteristics. As one of the solution on these problems, prediction techniques and rule bases were added to a classical recursive identification and control algorithm. Rule bases were used in the determination of control input considering the difference between the predicted value and the measured value. A mathelnatical model was used in the estimation and interpretation of the changes of state variables and parameters. Better performances were obtained by employing the control algorithm proposed in the present study compared to the conventional adaptive control method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.10
• /
• pp.606-610
• /
• 2003

Noise subtraction using reference channel data has been used to improve signal-to-noise ratio in magnetoencephalography. In this paper, an adaptive noise subtraction model is proposed and parameters for the model are optimized. A criterion to determine an optimal update period for the filter coefficients is proposed based on the ratio of peak amplitude of evoked field (N100m) divided by the output standard deviation. Experiments are carried out using a 40 channel MEG system. From the experiments, the proposed noise subtraction method shows superior performances over existing non-adaptive methods. Two-dimensional topographic map is shown for a diagnosis with a cubic spline interpolation.