• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.626-631
• /
• 2019

The policy-making and technological development for the supply expansion of eco-friendly automobiles has been continuing, but the internal combustion engines still accounts for about 95%. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. This study is a basic study for the post-Euro-VI exhaust response of CNG buses, and it is to investigate the basic characteristics according to Pd substitution transition metal effect, catalyst volume effect and space velocity. A catalysts was prepared and tested using a model gas reactor. The NGOC catalyst with 3Pd exhibited the highest catalytic activity with 22% at $300^{\circ}C$, 48% at $350^{\circ}C$ and about 75% at $500^{\circ}C$. 3Co NGOC containing 3wt% of transition metal was excellent in oxidation ability, and it was small in size of 2nm, and the degree of catalyst dispersion was improved and de-NO/CO conversion was high. The volume of the NGOC-LNT-SCR catalyst system was optimal in the combination of 1.5+0.5+0.5 with a total score of 165, considering $de-CH_4/NOx$ performance and catalyst cost. For SV $14,000h^{-1}$, the $CH_4$ reduction performance was the highest at about 20%, while the SV $56,000h^{-1}$ was the lowest at about 5%. If the space velocity is small, the flow velocity decreases and the time remaining in the catalyst volume become long, so that the harmful gas was reduced.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.167-173
• /
• 2017

Purple-fleshed potato powder (PFPP) was investigated to determine optimal mixing ratio with milk powder and dextrin to produce a ready-to-eat mashed potato powder. The rheological characteristics, color, and anthocyanin contents were studied at a different concentration of ingredients. The power-law model was applied to explain the mechanical spectra of mashed potatoes which represented the change in structure induced by different mixing ratios. Mixture design was used to obtain the experimental points used to establish the empirical models to describe the effects of each ingredient on the characteristic of the mashed potato. The results of mechanical spectra showed that both storage and loss moduli (G' and G'') were significantly influenced by PFPP and milk powder concentration. The power law parameters n' and n'' showed higher values for the mashed potato with a lower concentration of PFPP and a higher concentration of milk powder, which showed that the gel networks involved in the mashed potato were weaker. The optimum mixing ratio with the highest redness and anthocyanin content, while maintaining the rheological properties similar to the commercial mashed potato, was determined as PFPP:milk powder:dextrin = 90.49:4.86:4.65 (w/w). The proportions of PFPP and milk powder in the formulation significantly changed the characteristics of mashed potato, whereas no significant effect of dextrin was observed in this formulation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.5
• /
• pp.1-14
• /
• 2021

Excessive development and urbanization have destroyed animal, plant, habitats and reduced biodiversity. In order to preserve species diversity, habitat prediction studies are have been conducted at home and overseas using various modeling techniques. This study was conducted to suggest optimal habitat modeling research by comparing HSI and MaxEnt, which are widely used among habitat modeling techniques. The study was targeted on the endangered species of Prionailurus bengalensis in nearby areas (5460.35km2) including Cheonan City, and the same data were used for analysis to compare those models. According to the HSI analysis, Prionailurus bengalensis's habitat probability was 74.65% for less than 0.5 and 25.34% for more than 0.5 and the top 30% were forest (99.07%). MaxEnt's analysis showed that 56.22% of those below 0.5 and 43.79% of those above 0.5 were found to have a high explanatory power of 78.3% of AUC. The Paired Wilcoxn test, which evaluated the significance of thoes models, confirmed that the mean difference between the two models was statistically significant (p<0.05). Analysis of the differences in the results of those models using the matrix table shows that score 24.43% HSI and MaxEnt was accordance,12.44% of the 0.0 to 0.2 section, 7.22% of the 0.2 to 0.4 section, 2.73% of the 0.4 to 0.6 section, 1.96% of the 0.6 to 0.8, and 0.08% of the 0.9 to 1.0. To verify where the score difference appears, the result values of those models were reset to values from 1 to 5 and overlaid. Overlapping analysis resulted in 30.26% of the Strongly agree values, 56.77% of the agree values, and 11.92% of the Disagree values. The places where the difference in scores occurs were analyzed in the order of forest (45.23%), agricultural land (34.57%), and urbanization area (7.65%). This confirmed that the analysis of the same target species within the same target site also has differences in forecasts depending on the modelling method. Therefore, a novel analysis method combining the advantages of each modeling in habitat prediction studies should be developed, and future study may be used to select Prionailurus bengalensis and species-protected areas and species protection areas in the future. Further research is judged to require higher accuracy studies through the use of various modeling techniques and on-site verification.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.203-216
• /
• 2021

Analyzing various wave interactions with oscillating wave surge converters (OWSC) is essential because they must be operated efficiently under a wide range of wave conditions and designed to extract optimal wave energy. In the conceptual design and development stage of OWSC, numerical analysis can be a good alternative as a design tool. This study performed a numerical analysis on the behavioral characteristics of the inverted triangle flap against the incident waves using open source CFD to examine the essential behavioral attributes of OWSC. Specifically, the behavioral characteristics of the structure were studied by calculating the free water surface displacement and the flap rotation angle near the inverted triangular flap according to the change of the period under the regular wave conditions. By comparing and examining the numerical analysis results with the hydraulic model experiments, the validity of the analysis performed and the applicability in analyzing the wave-structure interactions related to OWSC was verified. The numerical analysis result confirmed that the hydrodynamic behavior characteristic due to the interactions of the wave and the inverted triangle flap was well reproduced.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1811-1821
• /
• 2021

Objective: A trial was conducted to investigate the effects of supplemental levels of Mn provided by organic and inorganic trace mineral supplements on growth, tissue mineralization, mineral balance, and antioxidant status of growing broiler chicks. Methods: A total of 500 male chicks (8-d-old) were used in 10-day feeding trial, with 10 treatments and 10 replicates of 5 chicks per treatment. A 2×5 factorial design was used where supplemental Mn levels (0, 25, 50, 75, and 100 mg Mn/kg diet) were provided as MnSO₄·H₂O or MnPro. When Mn was supplied as MnPro, supplements of zinc, copper, iron, and selenium were supplied as organic minerals, whereas in MnSO₄·H₂O supplemented diets, inorganic salts were used as sources of other trace minerals. Performance data were fitted to a linearbroken line regression model to estimate the optimal supplemental Mn levels. Results: Manganese supplementation improved body weight, average daily gain (ADG) and feed conversion ratio (FCR) compared with chicks fed diets not supplemented with Mn. Manganese in liver, breast muscle, and tibia were greatest at 50, 75, and 100 mg supplemental Mn/kg diet, respectively. Higher activities of glutathione peroxidase and superoxide dismutase (total-SOD) were found in both liver and breast muscle of chicks fed diets supplemented with inorganic minerals. In chicks fed MnSO₄·H₂O, ADG, FCR, Mn balance, and concentration in liver were optimized at 59.8, 74.3, 20.6, and 43.1 mg supplemental Mn/kg diet, respectively. In MnPro fed chicks, ADG, FCR, Mn balance, and concentration in liver and breast were optimized at 20.6, 38.0, 16.6, 33.5, and 62.3 mg supplemental Mn/kg, respectively. Conclusion: Lower levels of organic Mn were required by growing chicks for performance optimization compared to inorganic Mn. Based on the FCR, the ideal supplemental levels of organic and inorganic Mn in chick feeds were 38.0 and 74.3 mg Mn/kg diet, respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.481-495
• /
• 2020

After the resonator on the basis of the wave-filter theory was designed to control the waves with a specific frequency range surging into the harbor, the several case with the use of resonator have been reported in some part of sea, including the port of Long Beach, USA, and yacht harbor at Rome, Italy in order to control the long-period wave motion from the vessels. Recently, the utility and applicability of the resonator has been sufficiently verified in respect of the control of tsunami approximated as the solitary wave and/or the super long-period waves. However, the case with the application of tsunami in the real sea have not been reported yet. In this research, the respective case with the use of existing resonator at the port of Mukho and Imwon located in the eastern coast of South Korea were studied by using the numerical analysis through the COMCOT model adapting the reduction rate of 1983 Central East Sea tsunami and 1993 Hokkaido Southwest off tsunami. Consequently, the effectiveness of resonator against tsunami in the real sea was confirmed through the reduction rate of maximum 40~50% at the port of Mukho, and maximum 21% at the port of Imwom, respectively. In addition, it was concluded that it is necessary to study about the various case with application of different shape, arrangement, and size of resonator in order to design the optimal resonator considering the site condition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.496-505
• /
• 2020

In the previous research, the effectiveness of resonator was confirmed through the numerical analysis on two cases with the use of existing resonator at the Mukho and Imwon ports located in the eastern coast of South Korea by discussing the reduction rates of 1983 Central East Sea tsunami, and 1993 Hokkaido Southwest off tsunami, respectively. In this study, the reduction rates of tsunami height with three different resonators, Type I, II-1, and II-2, at the Samcheok port were examined respectively through the numerical analysis using COMCOT model under the same condition as the previous study. It was discussed the spatial distribution of maximum height of tsunami, change of water level, and effectiveness of resonator with the presence of new types of resonator, and change of their sizes. As a result, the effectiveness of resonator was verified through the application of new types of resonator reducing about maximum 40% of tsunami height. In order to design the optimal resonator for the variety of site condition, it is necessary to research about the various cases applying different shape, arrangement, and size of resonator as further study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.30-35
• /
• 2021

The present study examined the effects of various guide fin structures and boundary parameters on the thermal performance of heat exchangers used in heat recovery thermoelectric generators. The heat transfer rate and pressure drop of the heat exchangers without fins, with circular fins, with triangular fins, and with combined circular and triangular fins were simulated numerically using ANSYS 19.1 commercial code to confirm the effect of the guide fin structures. The heat transfer rate of the heat exchanger with combined fins was 27.0%, 5.2%, and 1.5% higher than those without fins, with circular fins, and with triangular fins, respectively. The pressure drop characteristic of the heat exchanger with the combined fins was 28.3% higher than that without fins but 9.2% and 10.5% lower than those with circular fins and with triangular fins, respectively. The heat exchanger with combined fins as the optimal model showed the highest heat transfer rate of 5664.9 W and pressure drop of 1454.02 Pa for highest hot gas temperature, maximum flow rates of hot gas and coolant, and lowest coolant temperature.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.6
• /
• pp.57-74
• /
• 2021

Purpose: Before COVID-19 pandemic, Chinese mid/low-priced hotel industry has been steadily growing in recent years, and internal and external competition has been intensifying. Under these circumstances, this study started with a strategic objective to increase the quality of service, thus enabling customer satisfaction and revisit intention. For enhancing the competitiveness of Chinese mid/low-priced hotel business, we plan to establish a model using SERVQUAL, O2O platform, and identify their relationship through empirical analyses. Research design, data and methodology: Through the consideration of the existing literature, this study intended to identify the characteristics of service quality in Chinese mid/low-priced hotels and to consider their impact on customer satisfaction and revisit intention. We also wanted to examine the moderating effect of the O2O platform between the characteristics of service quality and customer satisfaction. A survey was carried out on customers using mid/low-priced hotels in China and empirical analyses were conducted using regression analyses. Results: First, in the hypothesis of service qualities' effects on customer satisfaction were identified with significant positive effects. Second, in the hypothesis of service qualities' effects on revisit intention, "tangibles, reliability, and empathy" have shown significant positive. Third, in the verification of the moderating effect of the O2O platform, there were "positive partial moderating effects" between service qualities and customer satisfaction. Finally, the effect of customer satisfaction on revisit intention was positive significant. Conclusions: In order to satisfy their customers, improvements in service quality should be made first. In addition, customer satisfaction had a positive impact on revisit intention. In order to revitalize Chinese mid/low-priced hotels, differentiation strategy is also needed for specialized customers such as college students, and basically, efforts should be made to optimize the O2O platform. O2O platforms should establish optimal platform construction strategies based on the customer's perspective. After all, in the case of Chinese mid/low-priced hotels, it is necessary to strengthen the construction of the latest hardware infrastructure and O2O platform of software infrastructure, and to improve customers' advanced online and offline experiences. Finally, regarding the hypothesis that was rejected among service qualities' characteristics, we tried to discuss the reason and find the implications of these.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.55-61
• /
• 2011

This study investigate the use of ultraviolet(UV) light with hydrogen peroxide($H_2O_2$) for Methyl Tert Butyl Ether(MTBE) degradation in photolysis reactor. The process in general demands the generation of OH radicals in solution at the presence of UV light. These radicals can then attack the MTBE molecule and it is finally destroyed or converted into a simple harmless compound. The MTBE removal by photolysis were mathematically described as the independent variables such as irradiation intensity, initial concentration of MTBE and $H_2O_2$/MTBE ratio, and these were modeled by the use of response surface methodology(RSM). These experiments were carried out as a Box-Behnken Design(BBD) consisting of 15 experiments. Regression analysis term of Analysis of Variance(ANOVA) shows significantly p-value(p<0.05) and high coefficients for determination values($R^2$=94.60%) that allow satisfactory prediction of second-order regression model. And Canonical analysis yields the stationery point for response, with the estimate ridge of maximum responses and optimal conditions for Y(MTBE removal efficiency, %) are $x_1$=25.75 W of irradiation intensity, $x_2$=7.69 mg/L of MTBE concentration and $x_3$=11.04 of $H_2O_2$/MTBE molecular ratio, respectively. This study clearly shows that RSM is available tool for optimizing the operating conditions to maximize MTBE removal.