• 한국식품저장유통학회지
• /
• 제13권2호
• /
• pp.216-222
• /
• 2006

포도씨 유용성분을 효과적으로 추출하고자 마이크로웨이브를 이용하여 허용된 용매들(물, 에탄올, 아세톤)의 가열 특성을 확인하고 몇 가지 기능성분의 추출특성을 평가하였다. 이 때 추출조건의 설정을 위하여 microwave power(0, 50, 100, 150 W), 추출시간(1, 3, 5, 7, 9 min), 시료와 용매비(1:20, 1:10, 1:5, 1:2.5), 시료 입자크기(whole, 20, 40, 60 mesh) 별로 구분하여 추출하였으며, 추출물의 총 수율, 총 페놀성 화합물 함량, 카테킨 함량, 전자공여능, 갈색도 등을 측정하여 추출효율을 알아보았다. 용매의 가열특성 확인에서 본 실험은 100 W에서 $2{\sim}6$분 범위의 조사가 필요한 것으로 나타났다. 마이크로웨이브 용량이 높아질수록 물과 에탄올은 총 수율 및 유효성분의 함량이 증가되었으나, 아세톤은 100W 이상에서는 오히려 감소되는 경향이었다. 모든 용매에서 추출시간이 길어질수록 총 수율과 유효성분 함량이 증가하였으나, 5분 경과부터는 둔화되었다. 전반적인 추출효율과 용매회수 등을 고려한다면 포도씨 유용성분의 추출용매는 에탄올, 에너지 용량은 100 W 내외, 용매비는 1:10, 입자크기는 10 mesh 조건이 적합한 것으로 나타났다.

• 한국지열·수열에너지학회논문집
• /
• 제17권4호
• /
• pp.79-90
• /
• 2021

This paper presents a study to reduce the effect of blast pressure on the blast valves installed in protection tunnels, where the shape of the tunnel entrance and the blast pocket is optimized based on the predetermined basic shape of the protective tunnels. The reliability of the numerical tunnel models was examined by performing analyses of mesh convergence and overpressure stability and with comparison to the data in blast-load design charts in UFC 3-340-02 (DoD, 2008). An optimal mesh size and a stabilized distance of overpressure were proposed, and the numerical results were validated based on the UFC data. A parametric study to reduce the blast overpressures in tunnel was conducted using the validated numerical model. Analysis was performed applying 1) the entrance slope of 90, 75, 60, and 45 degrees, 2) two blast pockets with the depth 0.5, 1.0, and 1.5 times the tunnel width, 3) the three types of curved back walls of the blast pockets, and 4) two types of the upper and lower surfaces of the blast pockets to the reference tunnel model. An optimal solution by combining the analysis results of the tunnel entrance shape, the depth of the blast pockets, and the upper and lower parts of the blast pockets was provided in comparison to the reference tunnel model. The blast overpressures using the proposed tunnel shape have been reduced effectively.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권2호
• /
• pp.65-92
• /
• 2019

We survey a recently developed immersed finite element method (IFEM) for the interface problems. The IFEM uses structured grids such as uniform grids, even if the interface is a smooth curve. Instead of fitting the curved interface, the bases are modified so that they satisfy the jump conditions along the interface. The early versions of IFEM [1, 2] were suboptimal in convergence order [3]. Later, the consistency terms were added to the bilinear forms [4, 5], thus the scheme became optimal and the error estimates were proven. For elasticity problems with interfaces, we modify the Crouzeix-Raviart based element to satisfy the traction conditions along the interface [6], but the consistency terms are not needed. To satisfy the Korn's inequality, we add the stabilizing terms to the bilinear form. The optimal error estimate was shown for a triangular grid. Lastly, we describe the multigrid algorithms for the discretized system arising from IFEM. The prolongation operators are designed so that the prolongated function satisfy the flux continuity condition along the interface. The W-cycle convergence was proved, and the number of V-cycle is independent of the mesh size.

• 한국버섯학회지
• /
• 제21권3호
• /
• pp.110-117
• /
• 2023

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 ㎛) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 ㎍/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 ㎍/mL across three replicates, thus confirming the model's accuracy.

• 센서학회지
• /
• 제25권6호
• /
• pp.399-405
• /
• 2016

Scent diffuser using micro-pore piezo actuator achieved a commercial success because of its cheap production cost, but it is easy to be use for IT-based contents due to difficulty of scent intensity control. To solve this problem, we control the emission amount of scent diffuser by changing amplitude and frequency of input voltage applied to micro-pore piezo actuator. And, we analyzed the effect of density of cotton core on emission amount and a relationship between hole-size of mesh in piezo actuator and viscosity of scents to design a mechanically optimal scent device.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.96-101
• /
• 2015

In the previous study, we investigated the physical properties of new organic fillers made from major agricultural byproducts, including rice husks, peanut husks and garlic stems, and we estimated that rice husk was the best candidate for use as new organic fillers in paperboard. In this study, an organic filler prototype was produced with rice husk and the mill trials were carried out in a white liner chipboard (duplexboard) mill. The rice husk organic filler was added to the middle ply of SC $350g/m^2$ to determine the optimal conditions for the manufacture of rice husk organic fillers. The mill trials were performed three times and the bulk improvement and drying energy reduction were measured to identify the functionality of the rice husk organic filler compared to that of the commercial wood powder. In the first mill trial, the test failed because the surface roughness of the duplexboard had deteriorated after the rice husk organic filler was added to the OCC stock. As all of the particles remaining on the 60 mesh sieves were removed and the particle size was decreased by increasing the length of the grinding process, the surface roughness of the duplexboard did not be deteriorated in the second mill trial. However, the bulk improvement and drying energy reduction were not observed. In the final mill trial, as the particle size of the rice husk organic filler was controlled by increasing the portion of particles passing through the 60 mesh sieves and remaining 100 mesh sieves, higher bulk improvement and drying energy reduction were acquired compared to the commercial wood powder.

• 한국식품과학회지
• /
• 제26권3호
• /
• pp.305-309
• /
• 1994

이축압출성형기를 사용하여 붉은 통팥과 옥수수전분을 원료로 하여 압축성형하고 이를 건조, 분쇄, 배합하여 즉석팥죽 분말을 제조하였으며 이때의 제조공정과 제품의 품질을 검토하였다. 원료의 수분함량 $24{\sim}26%$, 압출성형온도 $150{\sim}155^{\circ}C$, 스크류의 회전속도 350 rpm 및 원료투입량 60 kg/hr의 압출성형조건으로 제품을 생산하였을 경우 팥죽 고유의 냄새와 색상을 유지하는 제품을 얻을 수 있었다. 압출성형중 분말원료에 가해지는 가수량이 6 kg/hr에서 2 kg/hr로 감소됨에 따라서 압출성형온도는 $150^{\circ}C$에서 $198^{\circ}C$로, 기계적소모에너지는 134 kwh/ton에서 144 kwh/ton으로 증가하였다. 건조분말상태에서 caking이 형성이 되지 않는 수분함량인 4% 이하로 건조되는 열풍건조 조건은 건조온도 $80^{\circ}C$ 에서는 4시간, $100^{\circ}C$ 에서는 1.5시간 이었다. 압출물의 분쇄후 분말의 입도분석은 체목이 0.5 mm인 것을 사용하였을 경우 약 80%가 65 mesh 체를 통과하였고, 1 mm인 체목인 경우는 약 65%가 65 mesh 체를 통과하였다. 최종배합제품의 수분흡수속도는 설탕배합구가 100% RH하에서 13시간이 경과된 후 caking이 형성되었다. 팥압출물분말, 옥수수전분 및 설탕의 배합비를 달리한 제품의 기호도 검사에서 팥의 함량이 줄어듬에 따라 팥죽냄새가 감소하여 기호성이 저하되었다.

• 한국작물학회지
• /
• 제68권1호
• /
• pp.20-26
• /
• 2023

고구마 괴근에 함유되어 있는 섬유질 함량은 품종에 따라 차이가 있다. 일부 품종에서 찌거나 구워서 섭취 시 입안에서 감지되는 섬유질 함량이 많아 식감을 떨어뜨리는 요인이 되고 있다. 본 시험은 섬유질 분리를 위한 거름망(체)의 적정 눈 크기를 탐색하여 분리 방법을 확립하고, 분리된 섬유질의 조성성분, 염색법을 이용한 섬유질 간이검정 가능성, 그리고 품종 간에 섬유질 함량 차이를 구명하고자 수행한 결과는 다음과 같다. 1. 찐 고구마를 으깬 후 3회 세척하여 섬유질 함량을 측정한 결과 143.3 mg/100 g으로 5회 세척(128.4 mg/100 g)에 비해 분리된 섬유질 양이 많아 3회 세척이 유리하였다. 2. 호감미 품종은 체의 눈이 큰 10 mesh (85.9%)와 30 mesh (9.6%)에서 95.5%가 잔류되었고 진율미 품종은 10 mesh (74.9%) 및 30 mesh (16.7%)에서 87.6%가 잔류되어 섬유질 분리를 위한 체의 눈은 30 mesh (600 ㎛)가 적당하였다. 3. 고구마 품종별 섬유질 함량 분석 결과, 진홍미가 가장 낮았고(24.8 mg/100 g), 호감미(111.4 mg/100 g)으로 가장 높아 호감미의 섬유질 함량은 진홍미의 4.5배 이상이었다. 4. 호감미와 진율미 품종에서 분리된 섬유질의 셀룰로스, 헤미셀룰로스 및 리그닌의 함량은 비슷한 함량을 나타내었고 2품종의 평균은 각각 32.5, 22.3 및 29.6%이었다. 5. 염색된 면적의 분포도와 섬유질 함량과의 상관계수는 0.79 (p < 0.001)로 유의성이 있었으며, 품종 간 염색 분포도가 다르게 나타나 생고구마를 이용한 염색방법으로 섬유질 함량에 대한 간이검정이 가능할 것으로 판단되었다.

• Journal of Forest and Environmental Science
• /
• 제24권1호
• /
• pp.53-59
• /
• 2008

목질 바이오매스(wood biomass)를 효율적으로 분해하는 최적 배양조건을 확립하기 위하여 국내 침엽수 4수종(소나무, 낙엽송, 잣나무, 리기다소나무)의 목질바이오매스를 혼합하여 목분의 적정입도, 배양기간, 기질첨가농도별 균주의 균체외효소 활성을 측정하였다. 연구 결과, 혼합목분을 기질로 했을때 Fomitopsis palustris가 분비하는 균체외효소 활성은 효소 종류에 따라 기질농도, 목분입도, 및 배양기간등의 배양조건에 따라 다른 효소활성 값을 나타냈다. 침엽수 혼합목분을 기질로 했을 때 대부분의 cellulase 분비를 유도하는 최적 조건은 목분 입도, 80~100 mesh, 기질 농도는 7.5%가 적정한 것으로 밝혀졌다. 또한 최적의 목분입도 및 투입농도 조건에서 배양기간은 4~8주로 적절한 것으로 구명되었다.

• 한국버섯학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2021

The choice of the culture medium is an important factor for the mass production of mycelia in submerged cultures. The influence of liquid medium on the mycelial dry weight of Paecilomyces tenuipes was investigated in this study. The regression equation is expressed as Y=-1292.94187+17.78612X1+18.92425X2+2.11464X3-0.019375X1X2-0.006276X1X3+0.008177X2X3-0.070169X12-0.292175X22-0.008818X32, where Y represents the value of the mycelial dry weight (g/L), X1 is the particle size of wood sawdust in liquid medium (mesh), X2 is the concentration of the wood sawdust in liquid medium, and X3 is incubation time (h). The medium was optimized using a response surface methodology, and the optimal medium contained 30 g of wood sawdust (140 mesh), 20 g of glucose, and 10 g/L of peptone. Under these conditions, the mycelial dry weight reached 38.1 g/L (actual value). The culture medium containing wood sawdust is simple and easy to use, highly efficient, and eco-friendly, and its effectiveness in large preparations of P. tenuipes mycelia with low material costs has been demonstrated.