• 대한산업공학회지
• /
• 제34권2호
• /
• pp.151-159
• /
• 2008

An efficient location registration scheme is essential to accommodate continuously increasing mobile subscribers and to offer a variety of multimedia services with good quality. In this study, we consider a distance-based registration scheme where the number of location areas varies on the basis of cell-by-cell, not of ring-by-ring, to analyze the optimal size of the location area. Using our proposed cell-by-cell distance-based registration scheme with random walk mobility model, we analyze a variety of circumstances to obtain the optimal number of cells for location area that minimizes total signaling traffic on radio channels. From our analysis results, we show that the optimal number of cells for location area is between 4 and 6 in most cases, and our cell-by-cell distance-based location registration scheme has less signaling traffic than optimal ring-by-ring distance-based location registration scheme where optimal distance threshold is 2 (thus the optimal number of cells for location area is 7).

• 한국수자원학회논문집
• /
• 제51권5호
• /
• pp.451-459
• /
• 2018

역거리법에 포함된 지수 값을 제곱으로 고정하지 않고 변수로 취급하여 강수량 자료를 바탕으로 지수 값의 최적치를 산출하였다. 이를 위해서 한강 상류부, 한강 하류부, 금강 상류부, 낙동강 중류부 등 4개 Group으로 나누고 각 Group 내 7개 관측소에 대하여 총 52개의 Case를 분석하였다. 각 Group에서 기준 관측소 1개와 주변관측소 4개를 조합한 Case별로 거리 지수 값의 최적치를 구하였다. 이 최적치를 산출하기 위해서 황금비 분할조사법을 적용하였고 강수 자료는 10년(2004~2013년) 간의 시우량 자료를 사용하였다. 이와 같이 구한 최적치를 최근 3년(2014~2016년) 간에 대하여 검증하였다. 본 연구에서 구한 최적의 거리 지수 값은 4개 Group에서 평균적으로 각각 3.280, 1.839, 2.181, 2.005로 나타났고 전체 평균하면 2.326이었다. 그리고 최적의 지수 값을 적용한 역거리법은 지수 값을 제곱으로 한 기존 역거리법과 비교하여 우수함을 보였다.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.123-129
• /
• 2013

Among various manual materials handling tasks, pushing/pulling was known to be one of the risk factors for the low back and shoulder musculoskeletal disorders (MSDs). This study was conducted to find out an optimal solution set of the handle height and distance for 4-wheel cart with two vertical handles. Ten male college students participated in the pushing force measurement experiment. The face-centered cube design, one of the central composite designs, was applied for the experiment, and the isometric voluntary pushing force was measured in 9 treatment conditions. The second order response surface model was predicted by using the pushing strength as a response variable, and the handle height and distance as independent factors. According to the 2nd order response model, the handle height and distance showed nonlinear relationship with the isometric pushing strength. To maximize the 2nd order response model (pushing force), the handle height and distance were optimized. The optimal handle height was 'xyphoid process height - stature', and the optimal handle distance was '$1.25{\times}shoulder$ width'. When calculated using the anthropometric data of the subjects of this study, the optimal handle height was $115.4{\pm}3.4$ cm, slightly higher than the elbow height, and the handle distance was $52.9{\pm}2.3$ cm.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권8호
• /
• pp.390-396
• /
• 2003

This paper is focused on an optimal block sectioning technique which are widely used in conventional railway system. We studied braking distance with pure train braking performance to generalize train braking. We tried to apply the braking distance to wayside signaling system to decide optimal block sectioning to reduce headway. The braking distances are obtained for 2 aspects, 3 aspects, 4 aspects and n aspects such that step speed control, are longer than the pure braking distance. We found an optimal solution with the generalized n aspects, and a minimum block distance for ATO mode.

• 응용통계연구
• /
• 제25권6호
• /
• pp.1027-1036
• /
• 2012

Among various biometrics recognition systems, statistical fingerprint recognition matching methods are considered using minutiae on fingerprints. We define similarity distance measures based on the coordinate and angle of the minutiae, and suggest a fingerprint recognition model following statistical distributions. We could obtain confidence intervals of similarity distance for the same and different persons, and optimal thresholds to minimize two kinds of error rates for distance distributions. It is found that the two confidence intervals of the same and different persons are not overlapped and that the optimal threshold locates between two confidence intervals. Hence an alternative statistical matching method can be suggested by using nonoverlapped confidence intervals and optimal thresholds obtained from the distributions of similarity distances.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.57-60
• /
• 2003

As the business dependency to information systems and the frequency of the large scale disasters increase, implementing the disaster recovery center has been a common practice. However, since there has been little quantitative decision method for the distance between the data center and the disaster recovery center, the distance decision has been commonly made by qualitative guidelines. In this research, the decision method for the optimal distance between the data center and the disaster recovery center is developed, using the cost analysis including the operation cost and the expected disaster cost. An illustrative numerical example is provided.

• 한국정보처리학회논문지
• /
• 제4권9호
• /
• pp.2173-2184
• /
• 1997

공간 데이타베이스 시스템에서 취급되는 여러 유형의 공간질의들 중 주어진 위치에서 가장 가까운 공간객체를 찾는 최근접질의는 매우 빈번히 발생한다. 최근접질의 성능을 높이기 위해서는 색인에서 검색되는 노드의 수를 최소화할 수 있어야 한다. 기존의 방법은 이차원 검색공간에서 최근접질의의 처리만을 고려하였으며, 검색되는 노드의 수를 정확히 줄이지 못하였다. 본 논문에서는 최적탐색거리를 제안하고 그 특성을 정리하였었다. 제안된 최적탐색거리는 최근접질의 처리시 검색될 노드들을 정확히 선정하기 위한 새로운 검색거리 측도이다. 우리는 최적탐색거리를 R-트리에 적용한 최근접질의 처리 알고리즘을 제안하고 기존의 방법에 비해 질의처리의 결과가 더 정확함을 증명하였다.

• 정보처리학회논문지D
• /
• 제18D권5호
• /
• pp.323-328
• /
• 2011

정확한 내용 기반 이미지 검색을 위하여 Earth mover's distance와 Optimal color composition distance와 같은 거리함수들이 제안되었다. 이 거리함수들은 정확도가 높은 검색 결과를 가져오지만 검색 시간이 매우 크기 때문에 대용량 데이터베이스에서 사용하기 어렵다는 문제점을 가지고 있다. 본 논문에서는 이러한 문제를 해결하기 위하여 선형 시간에 근사 Earth mover's distance를 구하기 위한 새로운 거리 함수를 제안한다. 제안하는 방법은 선형 시간에 두 이미지의 거리를 계산하기 위하여 공간 채움 곡선을 이용한다. 다양한 실험을 통하여 본 논문에서 제안하는 방법의 우수성을 검증한다. 실험 결과, 제안하는 기법이 Earth mover's distance에 비해 약 160배 정도의 검색 속도 향상 효과를 보이면서도 매우 유사한 결과를 검색하는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.79-83
• /
• 2016

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If thhe distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.239-242
• /
• 2003

In this paper, we propose how to determine the optimal camera position using inverse kinematics of virtual link model and manipulability measure. We model the variable distance and viewing direction between a target object and a camera position as a virtual link. And, by using inverse kinematics of virtual link model, we find out regions that satisfy the direction and distance constraints for the observation of target object. The solution of inverse kinematics of virtual link model simultaneously satisfies camera accessibility as well as a direction and distance constraints. And we use a manipulability measure of active camera system in order to determine an optimal camera position among the multiple solutions of inverse kinematics. By using the inverse kinematics of virtual link model and manipulability measure, the optimal camera position in order to observe a target object can be determined easily and rapidly.