• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.200-202
• /
• 1999

This paper describes the optimization problem of real power rescheduling and present an algorithm based linear programming for studying the load-shedding and generation reallocation problem when a portion of the transmission system is disabled and at power flow solution cannot be obtained for the overload of some lines. And in case initial is infeasible, solution could not be converge. So this paper gives an algorithm being lie infeasible quantities within limit. The paper describes a LP-based algorithm to obtain the solution in power dispatch related to overload situations in power system and it is easily extened under various objective. The optimization procedures is based in linear programming with bounded variables and use the multi-segment curve method for a objective function and the validity of the algorithm is verified with two examples : 10-bus system and 57-bus system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.238-239
• /
• 2013

It is a crucial requirement to utilize an economical battery capacity for the wind energy conversion system. In this paper, the optimal BESS capacity is determined for the wind farm whose dispatched power is assigned by the min-max dispatching method. Based on a lifetime cost function that indicates the BESS cost spent to dispatch 1kWh wind energy into grid, the battery capacity can be optimized so as to obtain the minimum system operation cost. Moreover, the battery state of charge (SOC) is also managed to be in a safe operating range to ensure the system undamaged. In order to clarify the proposed optimizing method, a 3MW permanent magnet synchronous generator (PMSG) wind turbine model and real wind speed data measured each minute are investigated.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권1호
• /
• pp.1-5
• /
• 2001

In this paper, a new method for calculating the penalty factors of all generators including the slack bus is presented. A simple transposition of the angle reference, from the conventional slack bus to another bus where no generation exists, enables the derivation of the loss sensitivity of the slack bus. Penalty factors are obtained without any physical assumption through a simple substitution of the bus loss sensitivities. Penalty factors calculated by proposed method are not dependent on reference bus and can also be directly substituted into the general ELD equation for computing the optimal dispatch. Equations for loss sensitivities, Penalty factors and ELD are calculated simultaneously in normal power flow computation. A case study on a test system has proved the effectiveness of the proposed' angle reference transposition' method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.714-716
• /
• 1996

This paper presents an optimization method for optimal reactive power dispatch which minimizes real power loss and improves voltage profile of power systems using evolutionary computation such as genetic algorithms(GAs), evolutionary programming(EP). and evolution strategy(ES). Many conventional methods to this problem have been proposed in the past, but most these approaches have the common defect of being caught to a local minimum solution. Recently, global search methods such as GAs, EP, and ES are introduced. The proposed methods were applied to the IEEE 30-bus system. Each simulation result, compared with that obtained by using a conventional gradient-based optimization method, Sequential Quadratic Programming (SQP), shows the possibility of applications of evolutionary computation to large scale power systems.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.809-815
• /
• 2018

Distributed generations (DGs) using renewable energy resources in power systems have been widely integrated, and many of these DGs have intermittency. DGs can significantly affect the overall voltage profile of the system through the reactive power control for a voltage support. Therefore, in the planning stage of the optimal operation and dispatch of voltage regulation devices, DGs' hosting capacity with the reactive power control scheme should be considered. In this paper, we model the IEEE 34-bus test feeder, including all essential equipment. An optimization method is utilized to determine the optimal siting and operation of the voltage regulation devices in the presence of DGs with reactive power control scheme. Finally, we compare the optimal results of the each case to analyze the relationship among the hosting capacity of the DGs and voltage regulation devices operation.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.253-262
• /
• 2016

본 논문은 경제급전 최적화 문제에 균형-교환 방법을 제안하였다. 제안된 알고리즘은 모든 발전기를 가능한한 밸브지점으로 운영한다고 가정한다. 초기치로 최대 발전량 $P_i{\leftarrow}P_i^{max}$로 설정하고, 각 발전기의 밸브지점 $v_k$까지 발전량을 감소시켰을 때의 평균 발전단가 $c_i=\frac{F(P_i)-F(P_{iv_k})}{(P_i-P_{iv_k})}$가 최대가 되는 $_{max}c_i$ 발전기 i의 발전량을 밸브지점 발전단가 $P_{iv_k}$로 감소시켰으며, ${\Sigma}P_i-P_d$ > 0이면 $c_i=F(P_i)-F(p_i-1)$의 $_{max}c_i$ 발전기 발전량을 $P_i{\leftarrow}P_i-1$로 감소시켜 ${\Sigma}P_i=P_d$의 균형을 맞추었다. 다음으로, $_{min}\{_{max}(P_i-P_i^{min}),\;_{max}(P_i^{max}-P_i)\}$>${\alpha}{\geq}10$의 범위에 대해 "-10" 간격으로 감소시키는 성인걸음법으로, 10>${\alpha}{\geq}1$ 범위에 대해서는 "-1"의 아기걸음법으로, $P_i=P_i{\pm}{\alpha}$에 대한 $_{max}[F(P_i)-F(P_i-{\alpha})]$>$_{min}[F(P_j+{\alpha})-F(P_j)]$, $i{\neq}j$이면 $P_i=P_i-{\alpha}$, $P_j=P_j+{\alpha}$로 발전량을 교환하는 방법으로 최적화를 수행하였다. 다음으로 ${\alpha}=\text{0.1, 0.01, 0.001, 0.0001$에 대해 미세한 교환을 수행하였다. 동적 경제급전 문제의 시험 사례에 제안된 알고리즘을 적용한 결과 기존의 휴리스틱 알고리즘 최적화 발전비용을 크게 감소시켜 경제적인 이익을 극대화 시켰다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1261-1268
• /
• 2013

This study proposes a voltage and reactive coordinative control strategy with distributed generator (DG) in a distribution power system. The aim is to determine the optimum dispatch schedules for an on-load tap changer (OLTC), distributed generator settings and all shunt capacitor switching on the load and DG generation profile in a day. The proposed method minimizes the real power losses and improves the voltage profile using squared deviations of bus voltages. The results indicate that the proposed method reduces the real losses and voltage fluctuations and improve receiving power factor. This paper proposes coordinated voltage and reactive power control methods that adjust optimal control values of capacitor banks, OLTC, and the AVR of DGs by using a voltage sensitivity factor (VSF) and dynamic programming (DP) with branch-and-bound (B&B) method. To avoid the computational burden, we try to limit the possible states to 24 stages by using a flexible searching space at each stage. Finally, we will show the effectiveness of the proposed method by using operational cost of real power losses and voltage deviation factor as evaluation index for a whole day in a power system with distributed generators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.99-101
• /
• 2000

Different optimization algorithms have been proposed to solve real and reactive power optimization problems. Most of all, linear programming techniques that employed a simplex method have been extensively used. But, the growth in the size of power systems demands faster and more reliable optimization techniques. An Interior Point(IP) mehod is based on an interior point approach to aim the solution trajectory toward the optimal point and is converged to the solution faster than the simplex method. This paper deals with the use of Successive Linear Programming(SLP) for the solution of the Security Constrained Economic Dispatch(SCED) problem. This problem is solved using the IP method. A comparison with simplex method shows that the interior point technique is reliable and faster than the simplex algorithm.

• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.228-234
• /
• 2005

This paper presents the evaluation of reactive power pricing through the control of generator voltages under the assumption that the reactive power market has been transformed into the real power market. By applying the concept of economic dispatch, which minimizes the total cost of real power generation to reactive power generation, the algorithm for implementing reactive power pricing is proposed to determine the optimum voltage profiles of generators. It consists of reactive power voltage equation, the objective function that minimizes the total cost of reactive power generation, and linear analysis of inequality constraints in relation to the load voltages. From this algorithm, the total cost of the reactive power generation can be yielded to the minimum value within network constraints as the range of load voltages. This may provide the fair and reasonable price information for reactive power generation in the deregulated electricity market. The proposed algorithm has been tested on the IEEE 14-bus system using MATLAB.