• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1921-1929
• /
• 2015

The smart substation is the heart of a transmission system, which is particularly emphasized as the most significant composition of smart grids in China. In order to assess the functionality performance of substation technologies, this paper presents methods used to identify the most promising solutions for smart substation design and to evaluate the technical levels of available technologies. The multi-index optimization model is presented to address the issue of smart substation planning. A mathematical model of the planning decision problem is established with multiple objectives consisting of economic, reliability, and green key indices, and many kinds of concerns including physical and environmentally friendly operations are formulated as a set of constraints. With respect to the assessment of the technical level regarding integration of advanced technologies into a substation, a modified grey whitenization weight function is adopted to structure a novel grey clustering method. The proposed grey clustering approach is used to overcome the difficulty of insufficient quantitative assessment capacity for traditional methods. The evaluation of technical effects provides the classification definition for the development phase and the maturity level of the smart substation. The effectiveness of the proposed approaches in planning decision-making and evaluation of construction efforts is demonstrated with case studies involving the actual smart substation projects of Wenchongkou substation in China Southern Power Grid (CSG) and Mengzi substation in State Grid Corporation of China (SGCC).

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1557-1566
• /
• 2007

Ten male crossbred (Thai $Native{\times}Anglo$ Nubian) goats with average live weight of $27{\pm}2$ kg were randomly assigned according to a $5{\times}5$ replicated Latin square design to receive five diets, $T_1$ = concentrate with 0% cassava chip (CC), $T_2$ = 25% CC, $T_3$ = 50% CC, $T_4$ = 75% CC and $T_5$ = 100% CC. Fresh elephant grass (FEG) was offered ad libitum as the roughage. A metabolism trial lasted for 21 days during which liveweight changes and feed intakes were measured. Based on this experiment, there were no significant differences (p>0.05) among treatment groups regarding DM intake and digestion coefficients of nutrients (DM, OM, NDF and ADF), except for $T_5$ (100% CC) which was lowest (p<0.05) in digestion coefficient of CP than $T_1$ and $T_3$. Rumen parameters (ruminal pH, $NH_3$-N and volatile fatty acids), blood urea nitrogen, blood glucose and packed cell volume were similar among treatments. Moreover, rumen microorganism populations were not affected (p>0.05) by cassava inclusion. The amount of N absorption and retention were similar among treatments, except for $T_5$ which tended to be slightly lower. Based on this experiment, it could be concluded that the optimal level of cassava inclusion to replace corn in goat diets was in the range of 25-75% of CC when fed with FEG and it was a good approach in exploiting the use of local feed resources for goat production.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.46-53
• /
• 2017

Background: The MLA is supported by both the abductor hallucis (ABH) and the extrinsic muscles. Insufficient muscular support may lower the MLA when the body's weight is applied to the foot. The short foot exercise (SFE) is effective in increasing the height of the MLA for people with flat feet. Most of the research related to the SFE has simply evaluated the efficiency of the exercise using enhanced ABH electromyography (EMG) activation. Since the tibialis anterior (TA), peroneus longus (PER), and ABH are all involved in supporting the MLA, a new experiment design examining the EMG of the selected muscles during SFE should be applied to clarify its effect. Objects: Therefore, this study aimed to clarify the effect of the SFE in different ankle position on the MLA angle and the activation of both the intrinsic and extrinsic muscles and to determine the optimal position. Methods: 20 healthy subjects and 12 subjects with flat feet were recruited from Yonsei University. The surface EMG and camera were used to collect muscle activation amplitude of TA, PER, and ABH and to capture the image of MLA angle during SFE. The subjects performed the SFE while sitting in three different ankle positions-neutral (N), dorsiflexion (DF) at 30 degrees, and plantar flexion (PF) at 30 degrees. Results: ABH EMG amplitudes were significantly greater in N and DF than in PF (p<.05). Muscle activation ratio of TA to ABH was the lowest in PF (p<.05). MLA angle in both groups significantly decreased in PF (p<.01). The TA and ABH was activated at the highest level in DF. However, in PF, subjects significantly activated the ABH and PER with relatively low activation of TA. Conclusion: Therefore, researchers need to discuss which SFE condition most effectively use the arch support muscle for flat foot.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.3
• /
• pp.120-124
• /
• 2016

Objective: Chronic lateral epicondylitis is a condition which becomes sore and tender on the lateral side of the elbow joint damaged from overuse and repetitive use of the extensor muscles of the forearm. The purpose of this study was to investigate the effects of flexion degrees in the elbow joint on extensor carpi radialis longus and brevis and biceps brachii muscles in individuals with healthy young adults. The main purpose of this study was to suggest the feasibility of optimal elbow angle during therapeutic eccentric exercise with resistance for strengthening of wrist extensors. Design: Cross-sectional study. Methods: Thirty health young adults (male 15, female 15) participated in this study. This study measured muscle activation in four different conditions of elbow flexion, $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$ during eccentric exercise with weight loading in wrist extensors, extensor carpi radialis longus and brevis and biceps brachii muscles using surface electromyography. Results: The muscle activation of extensor carpi radialis showed a negative relationship with the degrees of elbow joint flexion. With increasing elbow flexion angles, the ECRL muscle activation amount was significantly lower (p<0.05). In contrast, the muscle activation of the ECRB muscle activation amount was significanlty higher (p<0.05). Conclusions: This study suggests that the eccentric exercise of wrist extension with selected activation of wrist extensor muscles according to elbow flexion positions, and suggests that the extensor carpi radialis longus and brevis will need to be strengthened for preventing and treating chronic lateral epicondylitis regardless of degrees of elbow joint flexion.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.45-53
• /
• 2012

Hollows are easily made and bearing capacity is lowered near underground structures of concrete pavement because of poor compaction and long term settlement of the ground. Distresses occur and lifespan is shortened because of larger stress induced by external loadings expected than that in the design. In this paper, the distresses of the concrete pavement slab over box culverts were investigated at the Korea Expressway Corporation(KEC) test road. The transverse cracking of the slabs over the culverts was compared between up and down lines with different soil cover depth. The box culvert without soil cover and concrete pavement were modeled and analyzed by the finite element method(FEM) to verify the transverse cracking at the test road. Wheel loading was applied after self weight of the pavement and temperature gradient of the concrete slab at Yeojoo, Gyeonggi where the test road is located were considered. Positions of maximum tensile stress and corresponding positions of the wheel loading were found for each loading combination. Joint position minimizing the maximum tensile stress was found and optimal slab length over the culverts with diverse size were suggested.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.477-493
• /
• 2016

A single process using hot water (0% green liquor) and green liquor (GL) was investigated for pre-pulping extraction on two types of raw material. The GL was applied at different alkali charges of 0-5% on a dry wood weight basis. The extractions were performed at an H-factor 900 at $180^{\circ}C$. The 0% and 3% GL extraction detected acetic acid (AA) at 10.02 and $9.94g/{\ell}$, extracts derived from hardwood, 2.46 and $3.76g/{\ell}$, extracts derived from softwood, respectively. The single liquid-liquid extraction (LLE) was studied using tri-n-alkylphosphine oxide (TAPO). Response surface methodology (RSM) was employed as an efficient approach for predictive model building and optimization of AA recovery conditions. The extraction of AA was evaluated with a three-level factorial design. Three independent variables, pH (0.5-3.5), temperature ($25-65^{\circ}C$), and residence time (24-48 min) were investigated. Applying the RSM models obtained, the optimal conditions selected of extracts derived from hard- and softwood with a 3% GL were approximately pH 1.4, $26.6^{\circ}C$, 43.8 min and approximately pH 0.7, $25.2^{\circ}C$, 24.6 min, respectively. The predicted and experimental values of AA recovery yield were similar whilst sugar retention was 100%.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.575-579
• /
• 2007

Sludge disposal technology has been studied with many researchers since disposal of sewage sludge has been a social problem. The current technologies include incineration, carbonization, pyrolysis, landfilling and fertilization. However, all of these processes require a dry process, because sewage sludge with more than 80% high water content is difficult to be used as a raw material. This study has the purpose to establish the optimal operation conditions and the technology as changing the variables: kiln residence time, sludge load, dryer temperature, by using the previous study that is rotary kiln type dryer designed as a numerical simulation study. As the results, optimum conditions are determined as follows: kiln residence time, sludge load, dryer temperature are $62.5kg/m^3{\cdot}hr$, 26.2 min, $330^{\circ}C$, respectively. Content of water, drying efficiency, weight loss, volume loss show that the results are $10{\pm}2$, 88, 80, 60%, and the dried sludge is released by a dryer below 10 mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1969-1975
• /
• 2012

The air brake system used in heavy vehicle is very important from the point of safety due to its weight. In general, air brake system generates relatively long response time and large loss of pressure. It is known that the response time can be decreased by optimal design of brake system, i.e., by increasing the system pressure, minimizing the air line, and material of components. In this study, We developed experimental rigs for the measurement of braking response of heavy duty trucks and compared with the simulated results obtained from the net work fluid flow system analysis code (FLOWMASTER). The effect of several parameters such as, system pressure, diameter of pipe, chamber temperature on the brake response performance have been examined.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.836-843
• /
• 2014

Obesity, a condition in which an abnormally large amount of fat is stored in adipose tissue, causing an increase in body weight, has become a major public health concern worldwide. The purpose of this study was to optimize the process for fermented milk for the production of a functional product with an anti-obesity effect by using Lactobacillus plantarum Q180 isolated from human feces. We used a 3-factor, 3-level central composite design (CCD) combined with the response surface methodology (RSM). Concentration of skim milk powder (%, $X_1$), incubation temperature ($^{\circ}C$, $X_2$), and incubation time (h, $X_3$) were used as the independent factors, whereas pH (pH, $Y_1$), anti-lipase activity (%, $Y_2$) and anti-adipogenetic activity (%, $Y_3$) were used as the dependent factors. The optimal conditions of fermented milk for the highest anti-lipase and anti-adipogenetic activity with pH 4.4 were the 9.5% of skim milk powder, $37^{\circ}C$ of incubation temperature, 28 h of incubation time. In the fermentation condition, the predicted values of pH, anti-lipase activity and anti-adipogenetic activity were 4.47, 55.55, and 20.48%, respectively. However, the actual values of pH, anti-lipase activity and anti-adipogenetic activity were 4.50, 52.86, and 19.25%, respectively. These results demonstrate that 9.5% of skim milk powder and incubation at $37^{\circ}C$ for 28 h were the optimum conditions for producing functional fermented milk with an anti-obesity effect.