• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.1003-1020
• /
• 2017

Purpose: The purpose of this study is to find the optimum working conditions for spot welding of wire Cu alloys to achieve high-level quality. The parts subject to spot welding are brush card assemblies, which are the main module of the electric movement method of the car seat. Methods: In this study, the signal-to-noise ratio(SN ratio) and the loss function [L(y)] are used as Taguchi method for dynamic characteristics. Results: The results of the study are as follows. First, the analysis of variance using SN ratio showed 6 significant factors(p = 0.1% or less) among 7 factors except press force. Second, the optimal design of the dynamic characteristics is the tip exchange cycle: 50,000 ea., the welding time is 110 ms, the pressing force is 11 kgf/cm2, the rise time is 40 ms, and the tip dressing is 3,000 ea., Tip angle is 12o and electric current is 1,800 A. Conclusion: The validity of the spot welding process of the manufacturer's brush card assembly was verified and proved to be consistent with the study results. The results of this study are expected to standardize the welding conditions and guarantee the quality level required by the customers.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.75-79
• /
• 2010

The Remote welding system(RWS) using $CO_2$ laser equipment has focusable distance of laser beam longer than 800 mm from workpiece and can deflect the laser beam by the scanner mirrors very rapidly. In the case of normal welding system based on robot, there is a limit to move the shortest path in short time and this causes interference between robot and workpiece. On the other hand, RWS is the optimized equipment to get big merits with advanced sequence of welding and short cycle time. However, there is still a pending task such as the control of plasma in the welding process of thick sheets therefore, it requires high power laser beam because of the absence of assist gas equipment in itself. In this study, high-tensile steel plates were overlap welded with $CO_2$ RWS for the production of car body and the influence of penetration depth according to the existence of assist gas was analyzed. Excellent tensile strength with enough width of molten zone independent to penetration depth was observed under welding condition with 3.6 kW laser power and 2.8 m/min welding speed without assist gas. Finally, the proto-type automotive parts were produced by applying the deduced optimal welding condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.123-134
• /
• 2012

A typical cooling system of an engine relies on a water pump that circulates the coolant through the system. The pump is typically driven by the crankshaft through a mechanical link with engine starting. In order to reduce the friction and warm-up time of an engine, the clutch-type water pump (CWP) was applied in 2.0 liter diesel vehicle. The clutch-type water pump can force cooling water to supply into an engine by the operation of an electromagnetic clutch equipped as the inner part of pump system. The onset of CWP is decided by temperature of cooling water and engine oil. And, the control logic for an optimal operation of the clutch-type water pump was developed and applied in engine and vehicle tests. In this study, the warm-up time was measured with the conventional water pump and clutch-type water pump in engine tests. And the emission and the fuel consumption were evaluated under NEDC mode in vehicle tests. Also, tests were carried out for the various temperature conditions starting the operation of CWP. From the results of the study, the application of CWP can improve the fuel consumption and $CO_2$ reduction by about 3%.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.4
• /
• pp.149-155
• /
• 2015

Objective: The goal of this study was to investigate the relationship between serum progesterone (P4) levels on the day of human chorionic gonadotropin (hCG) administration and the pregnancy rate among women undergoing controlled ovarian stimulation for in vitro fertilization (IVF) or intracytoplasmic sperm injection-embryo transfer (ICSI-ET) using a flexible antagonist protocol. Methods: This prospective study included 200 IVF and ICSI-ET cycles in which a flexible antagonist protocol was used. The patients were divided into five distinct groups according to their serum P4 levels at the time of hCG administration (0.80, 0.85, 0.90, 0.95, and 1.00 ng/mL). The clinical pregnancy rate (CPR) was calculated for each P4 interval. Statistically significant differences were observed at a serum P4 level of 0.9 ng/mL. These data suggest that a serum P4 concentration of 0.9 ng/mL may represent the optimal threshold level for defining premature luteinization (PL) based on the presence of a significant negative impact on the CPR. Results: The CPR for each round of ET was significantly lower in the PL group defined using this threshold (25.8% vs. 41.8%; p=0.019), and the number of oocytes retrieved was significantly higher than in the non-PL group ($17.3{\pm}7.2$ vs. $11.0{\pm}7.2$; p=0.001). Elevated serum P4 levels on the day of hCG administration were associated with a reduced CPR, despite the retrieval of many oocytes. Conclusion: Measuring serum P4 values at the time of hCG administration is necessary in order to determine the optimal strategy for embryo transfer.

• Journal of Veterinary Clinics
• /
• v.19 no.4
• /
• pp.418-425
• /
• 2002

Estrus was induced in 13 anestrus Korea Jin-do bitches by intramuscular injection of pregnant mare serum gonadotropin (PMSG) in a dose of 500 lU once daily for ten consecutive days, followed by an additional single intraveneous injection of 1,000 lU of human chorionic gonadotropin (hCG) on the tenth day. Day-changes of vaginal epithelial cells during the hormone treatment were investigated in each experimental bitches and compared with the those of spontaneous estrus bitches. The first days of vulval bleeding and male acceptance after PMSG treatment were on Day 6.0$\pm$ 1.5 (mean$\pm$ SD) and Day 9.0$\pm$ 1.9, respectively. And in all of 13 bitches, vulval swelling and perineal reflex were shown. The mean durations of proestrus and estrus were 2.9$\pm$ 1.4 (mean$\pm$ SD, range ; 1-6) and 11.5: 1.7 (range ; 8-14) days, respectively, that is, duration of proestrus was significantly shorter than that of the spontneous estrous bitches but duration of estrus was longer than that of the spontaneous estrous bitches. Characteristic features of vaginal cytology during the estrous cycle were the high proportions of large intermediate cell, superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell and anuclear cell in estrus and parabasal cell, small intermediate, large intermediate cell, and leukocyte in diestrus, respectively. The comification index (Cl) was significantly high proportion in proestrus and estrus, when Day 0 was timed from the first day of male acceptance, the Cl was first increased above 80% on Day 0 and maintained above 80% until Day 0 to Day 5 during 6 days and showed a peak on Day 2. Also it was maintained above 90% until Day 2 to Day 3 during 2 days. These results indicated that all 13 ekperimental bitches showed positive estrus detection by the estrus behavior and vaginal smear test after treated with PMSG and hCC. It suggested that vaginal cytology was used to estimate the optimal mating and ovulation time, in consideration of the day when the Cl was maintained above 80% in estrus-induced Korea Jin-do bitches.

• Journal of Fashion Business
• /
• v.7 no.1
• /
• pp.38-54
• /
• 2003

This study looked into the present status of e-mail marketing, which is conducted in local Internet fashion shopping malls and is being used as a one-to-one marketing method in the e-CRM concept so as to establish an effective e-mail marketing policy by grasping problems based on the current status and by presenting solutions to the problems. This study analyzed the e-mail letters received during a certain period of time by 30 professional Internet fashion shopping malls of with famous goods, brands and non-brands. Four individuals subscribed to shopping mall through the procedure for membership applying for e-mail services. The analysis showed that there were no shopping malls that were doing a differentiated e-mail marketing among Internet shopping malls. As for time factor, they were sending e-mail letters irregularly regardless of a certain cycle. And as for visual factor, they didnt have any standard for the content of the mail. As for content factor, the contents of their mail were not differentiated and all the same. The comparison of fashion malls showed that the brand shopping malls were the most active in e-mail marketing. On the basis of the problems, the direction for the effective e-mail marketing of Internet shopping malls are presented as follows: First, individualized contents fitting for customers should be developed, and differentiated mailing services should be provided thereby. Second, each shopping mall should make periodic tests of mailing to find out the optimal time and day to provide e-mail services to the customers at the designated time. Third, e-mail should be differentiated fitting for the website according to a certain on a certain standard for visual effects and the identity of shopping mall should be established. Firth, in the contents of e-mail, the image and message elements should be properly harmonized and creative policies should be made with interactive or recreational elements. Fifth, a homepage policy which can satisfy customers demand for information when the e-mail is clicked on..

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.86-89
• /
• 2018

To develop Grifola frondosa as a new commercial product, we investigated the optimal primordium formation method for bottle cultivation. Primordium formation was initiated on the sixth day in all treatments, but in the T7 treatment, which consisted of removing old spawn and turning the bottle upside-down, was initiated on the ninth day. The ratio of primordium formation was at its highest value, 98.9%, in T3 and T7. Among the treatments, T7 produced the highest quality fruiting bodies and a mushroom yield of 112.8 g in each 850 mL bottle, but its crop cycle time was somewhat longer than those of the other treatments. These results indicate that appropriate methods for primordium formation in bottle culture could enhance mushroom quality and productivity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.115-123
• /
• 2010

Cool-down performance after soaking is important because it affects passenger's thermal comfort. The cooling capacity of HVAC system determines initial cool down performance in most cases, the performance is also affected by location, and shape of panel vent, indoor seat arrangement. Therefore, optimal indoor designs are required in developing a new car. In this paper, initial cool down performance is predicted by CFD(computational fluid dynamics) analysis. Experimental time-averaging temperature data are used as inlet boundary condition. For more reliable analysis, real vehicle model and human FE model are used in grid generation procedure. Thermal and aerodynamic characteristics on re-circulation cool vent mode are investigated using CFX 12.0. Thermal comfort represented by PMV(predicted mean vote) is evaluated using acquired numerical data. Temperature and velocity fields show that flow in passenger's compartment after soaking is considerably unstable at the view point of thermodynamics. Volume-averaged temperature is decreased exponentially during overall cool down process. However, temperature monitored at different 16 spots in CFX-Solver shows local variation in head, chest, knee, foot. The cooling speed at the head and chest nearby panel vent are relatively faster than at the knee and foot. Horizontal temperature contour shows asymmetric distribution because of the location of exhaust vent. By evaluating the passenger's thermal comfort, slowest cooling region is found at the driver's seat.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.2
• /
• pp.127-136
• /
• 2015

We present a by-product of our long term photometric monitoring of cataclysmic variables. 2MASS J18024395 +4003309 = VSX J180243.9 +400331 was discovered in the field of the intermediate polar V1323 Her observed using the Korean 1-m telescope located at Mt. Lemmon, USA. An analysis of the two-color VR CCD observations of this variable covers all the phase intervals for the first time. The light curves show this object can be classified as an Algol-type variable with tidally distorted components, and an asymmetry of the maxima (the O'Connell effect). The periodogram analysis confirms the cycle numbering of Andronov et al. (2012) and for the initial approximation, the ephemeris is used as follows: Min I. BJD = 2456074.4904+0.3348837E. For phenomenological modeling, we used the trigonometric polynomial approximation of statistically optimal degree, and a recent method "NAV" ("New Algol Variable") using local specific shapes for the eclipse. Methodological aspects and estimates of the physical parameters based on analysis of phenomenological parameters are presented. As results of our phenomenological model, we obtained for the inclination $i=90^{\circ}$, $M_1=0.745M_{\odot}$, $M_2=0.854M_{\odot}$, $M=M_1+M_2=1.599M_{\odot}$, the orbital separation $a=1.65{\cdot}10^9m=2.37R_{\odot}$ and relative radii $r_1=R_1/a=0.314$ and $r_2=R_2/a=0.360$. These estimates may be used as preliminary starting values for further modeling using extended physical models based on the Wilson & Devinney (1971) code and it's extensions

• Journal of Information Processing Systems
• /
• v.5 no.1
• /
• pp.33-40
• /
• 2009

Ever since the network-based malicious code commonly known as a 'worm' surfaced in the early part of the 1980's, its prevalence has grown more and more. The RCS (Random Constant Spreading) worm has become a dominant, malicious virus in recent computer networking circles. The worm retards the availability of an overall network by exhausting resources such as CPU capacity, network peripherals and transfer bandwidth, causing damage to an uninfected system as well as an infected system. The generation and spreading cycle of these worms progress rapidly. The existing studies to counter malicious code have studied the Microscopic Model for detecting worm generation based on some specific pattern or sign of attack, thus preventing its spread by countering the worm directly on detection. However, due to zero-day threat actualization, rapid spreading of the RCS worm and reduction of survival time, securing a security model to ensure the survivability of the network became an urgent problem that the existing solution-oriented security measures did not address. This paper analyzes the recently studied efficient dynamic network. Essentially, this paper suggests a model that dynamically controls the RCS worm using the characteristics of Power-Law and depth distribution of the delivery node, which is commonly seen in preferential growth networks. Moreover, we suggest a model that dynamically controls the spread of the worm using information about the depth distribution of delivery. We also verified via simulation that the load for each node was minimized at an optimal depth to effectively restrain the spread of the worm.