• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.1
• /
• pp.11-19
• /
• 2018

The gut microbiome has been studied extensively over the past decade with most scientific reports focused on the adverse role of the gut microbiome on gastrointestinal diseases. For example, the altered gut microbiome exacerbates the development of immune system-mediated damage in many diseases. The most studied pathologies include irritable bowel syndrome, inflammatory bowel diseases, and colitis-associated cancer. On the other hand, intestinal microflora is also beneficial and contributes to the intestinal physiology by the synthesis of vitamins, production of short chain fatty acids and bile acid metabolism, thereby maintaining gut homeostasis. Therefore, the balance between commensal and pathogenic bacteria populations influences mainly the maintenance of intestinal health. Changes in the intestinal microflora have been suspected to be the underlying causes of multiple diseases. Despite the immense amount of published data, the optimal gut microbiome composition is still controversial. This review briefly outlines the connection between the gut microbiome and critical gastrointestinal diseases focusing on three prominent intestinal disorders: irritable bowel syndrome, inflammatory bowel diseases, and colitis-associated cancer disorders. Finally, intervention strategies using natural products for the alleviation of these diseases and the maintenance of a health gut microbiome are suggested.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.1
• /
• pp.745-758
• /
• 2001

The purpose of study to phenomenological examine and the mechanism regarding the gene(DNA, RNA, Protein) and sports to studied, analyzed. and evaluated. This review considers the evidence for genetic effects in several determinants of endurance performance and resistance performance, namely: body measurements and physique, body fat pulmonary functions, cardiac and circulatory functions, muscle characteristics. substrate utilization, maximal aerobic power and other. Moreover, the response to aerobic training of indicators aerobic work metabolism and endurance performance is reviewed, with emphasis on the specificity of the response and the individual differences observed in training ability. This study indicate that improvement of 'Enhancer Action' in RNA genes changed by exercise or sports. Moreover exercise was effect on Central Dogma with DNA makes RNA makes Protein. and think that occurred with exercise influence on skeletal muscle into cell have to Myosin Heavy Chain (MHC) changed was after exercise performance, which accompanied into skeletal muscle that were exercise-induces gene-modulation that is, take gene mutations. This study known that existed hormone(epinephrine)-immune system with interaction. Exercise were altered insulin binding and MAP Kinase signaling increased into immune cells. This review suggested that the high rate of glutamine utilization by cells of the immune system serves to maintain a high intra cellular concentration of the intermediates of biosynthetic pathways such that optimal rates of DNA, RNA and protein synthesis can be maintained. In the absence of glutamine, lymphocytes do not proliferate in vitro: proliferation increase greatly as the glutamine concentration increase. Glutamine is synthesized in skeletal muscle. Skeletal muscle and plasma glutamine levels are lowered by sepsis, injury, bums, surgery and endurance exercise and in the overtrained athlete. The study of result show that production of ET-1 is markedly increased tissue specifically in the heart by exercise without appreciable changes in endothelin-converting enzyme and endothelial receptor expressions, suggest that myocardial ET-1 may participate in modulation of cardiac function during exercise. Conclusionally, this study indicate that improvement of 'Enhancer Action' in RNA genes changed by exercise or sports. Moreover exercise was effect on Central Dogma with DNA makes RNA makes Protein. This study is expected to contribute the area of sports science, medicine, hereafter more effort is required to establish the relation between gene alters and exercise amount.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.342-349
• /
• 2010

Lactic acid is widely used in the food, chemical and pharmaceutical industries, and there is an increasing demand for lactic acid as the raw material of poly lactic acid(PLA), which is a biodegradable polymer. Lactic acid production has been changing over from production by synthesis to production by fermentation, since the fermentation process is more nature friendly and economic. However, the fermentation method generates excess water and impurities with high boilers. The presence of high boilers and non volatility of lactic acid makes the separation of lactic acid very difficult job. Also, the purification-separation process requires the many investment costs and energy costs. Reactive distillation concept was also introduced for the process, giving higher selectivity and yield compared to the convention method. We introduce a new highly integrated process, reactive diving wall column, to reduce the capital and energy cost for producing a pure lactic acid. The reactive dividing wall column combines reactive distillation and dividing wall column. We compared capital and energy consumption required for the purification of lactic acid the between the proposed design structures. And we examined the effect of major process variables on the process performance and determined optimal process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.121-127
• /
• 2007

We have applied mechanical alloying (MA) to get $Mg_2Si$ thermoelectric material with nano-sized grains. An optimal milling and heat treatment conditions to obtain the single phase of $Mg_2Si$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry (DSC) measurement. The $Mg_{66.7}Si_{33.3}$ MA samples ball-milled for $20{\sim}180\;hrs$ exhibit two broad exothermic heat releases around $220^{\circ}C$ and $570^{\circ}C$. On the other hand, MA sample ball-milled far 260 hrs exhibits only a sharp exothermic peak at $230^{\circ}C$ Single phase Mg2Si powder can be obtained by MA of $Mg_{66.7}Si_{33.3}$ mixture for 60 hours and subsequently heated up to $620^{\circ}C$. Sintering of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $800{\sim}900^{\circ}C$ under 50 MPa. The shrinkage of sintering sample during SPS was significant at about $200^{\circ}C$. All compact bodies have a high relative density above 94% with metallic glare on the surface.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.268-272
• /
• 2008

$LiFePO_4$ material was synthesized by electrospinning method to obtain optimal particle size($50{\sim}100\;nm$) without carbon coating or ball milling. This material showed an orthorthombic structure with Pnma space group without any impurities, such as FeP or $Fe_2P$, in the XRD pattern. The particle morphology and particle shape were observed by SEM analysis. Li/$LiFePO_4$ cell showed a high initial discharge capacity of 135 mAh/g, at current density of $0.1\;mA/cm^2$ with a cut-off voltage of 2.8 to 4.0V. This cell exhibited a perfect cycle performance over 99.9% cycle retention rate up to 50 cycles.

• Composites Research
• /
• v.32 no.6
• /
• pp.355-359
• /
• 2019

The high efficient water splitting system should involve the reduction of high overpotential value, which was enhanced by the electrocatalytic reaction efficiency of catalysts, during the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) reaction, respectively. Among them, transition metal-based compounds (oxides, sulfides, phosphides, and nitrides) are attracting attention as catalyst materials to replace noble metals that are currently commercially available. Herein, we synthesized optimal monodisperse Co₃[Co(CN)₆]₂ PBAs by FESEM, and confirmed crystallinity by XRD and FT-IR, and thermal behavior of PBAs via TG-DTA. Also, we synthesized monodispersed Co₃O₄ nanocubes by calcination of Co₃[Co(CN)₆]₂ PBAs, confirmed the crystallinity by XRD, and proceeded OER measurement. Finally, the synthesized Co₃O₄ nanocubes showed a low overpotential of 312 mV at a current density of 10 mA·cm^-2 with a low Tafel plot (96.6 mV·dec^-1).

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.312-316
• /
• 2006

A optimal condition for the Ginkgo biloba extraction in ethanol and water binary solvent system has been proposed based on concentration of bilobalide and ginkgolide known as having a antimicrobial components in the range 5% to 70% ethanol in water at $80^{\circ}C$. Concentration of bilobalide as a single component of Ginkgo biloba leaves extract is the highest at the 60% ethanol and ginkgolide A and B is highest at 50% ethanol. Antimicrobial effect of Ginkgo biloba leaves extracts on the S. aureus was also examined by disc diffusion test and optical density test. In case of the disc diffusion test, the clean zone diameter was increased from 0.95 cm to 1.70 cm as ethanol concentration increased from 5 to 70%. However, over the 40% of ethanol concentration the antimicrobial effect was almost flat. Based on these results, we propose that the 40% of ethanol and 60% water solvent is most desirable for Ginkgo biloba extract considering vapor pressure problem in concentrating process after extraction. We introduced SEM and TEM to figure out the morphological change on the surface and inside body of S. aureus when Ginkgo biloba leaves extract was treated. After mixed with Ginkgo biloba leaves extract blast like blebs appeared on the surface of S. aureus cells and cell wall was not observed. From the these results, it seems that the Ginkgo biloba leaves extract including bilobalide and ginkgolide A, B prevent cell wall synthesis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.30-39
• /
• 2020

Single-phase barium ferrite powder was synthesized using the sol-gel method. At this time, an attempt was made to find the optimal experimental conditions for the production of single-phase barium ferrite by varying the Fe to Ba molar ratio (Fe/Ba) and the heat treatment temperature. In addition, cobalt-substituted barium ferrite particles were prepared using cobalt, which has an excellent effect on coercivity control for the production of ferrite fine particles having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media. The changes in the magnetic properties of these were investigated. X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA), and field emission scanning electron microscopy (FE-SEM) were used to observe the synthesis of single-phase, and Fourier transform infrared spectroscopy (FT-IR) and energy dispersive X-ray spectrometry (EDS) were used to analyze the chemical structure and composition. The coercivity of the cobalt-substituted barium ferrite powder was measured by vibrating sample magnetometry (VSM). As a result, single-phase Barium ferrites were synthesized when the Fe/Ba molar ratio was 10, and the heat treatment temperature was 900 ℃. The coercivity decreased with increasing the amount of Co added. Barium ferrite, having a coercivity of 2.5 to 5.5 kOe for use in high-density magnetic recording media, was synthesized when the Co to Fe(Co/Fe) molar ratio was less than 0.16.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.2
• /
• pp.99-110
• /
• 2001

A gem-quality yttria-stabilized zirconium oxide crystals were synthesized by the skull-melting method, using the RF electrical apparatus. Principal raw materials used were $ZrO_2$and 25 wt.% $Y_2O_3$as stabilizer and 0.03~0.05 wt.% $Nd_2O_3$decolorizing agent were added to it. The single crystals were approximately 20$\times$63 mm in size with chemical composition $Zr_{0.73}$ $Y_{0.27}$ $O_{1.87}$ . The crystals are isotropic with no appreciable anisotropism under a polarizing microscope. Their refractive indices are in the range of 2.15~2.18, specific gravity 5.85, Mohs' hardness 8~8.5, and reflectivity 13.47%. The zirconia crystals were confirmed to have cubic structure with Face-centered lattice(Z=4), space group Fm3m ($CaF_2$-type structure) and unit cell parameters are a=5.157 $\AA$. The optimal growing conditions for yttria-stabilized zirconia are 50 kW, 2.94 MHz in power and to use a crucible with 105 mm $\times$ 135 mm in size. When the lowering speed of the crucible was set 16mm/hr gave the best yield, 42%. Since the refractive index(2.15~2.18) of cubic zirconia is smaller than that of diamond, the angle between crown and pavilion should be fashioned to make it smaller than $40.5^{\circ}$ to show the maximum brilliancy and fire.