• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.564-572
• /
• 2012

A terpolymer of vinylbenzyl chloride-co-ethyl methacrylate-co-styrene (VBC-EMA-St) was prepared for membrane capacitive deionization (MCDI) by radical polymerization and amination reaction of various amination times. Nonfluoro aminated VBC-EMA-St anion-exchange membranes were characterized by Fourier transform infrared (FTIR) spectrometry. Molecular weight, polydispersity and thermal stability were obtained by gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). The basic properties such as water uptake, ion exchange capacity, electrical resistance and CDI charge-discharge current were measured. The optimal values of ion exchange capacity, water uptake, electrical resistance and molecular weight of synthesized anion-exchange membrane were 1.69 meq/g, 23.7%, 1.61 ${\Omega}{\cdot}cm$ and $3.4{\times}10^4$ g/mol, respectively. As compared with conventional membrane, the pattern of cyclic charge-discharge current of synthesized anion-exchange membrane indicated efficient electrosorption and desorption.

• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.151-160
• /
• 2014

A series of terpolymers based on stearyl methacrylate (SMA), n-methyol acrylamide (n-MAM), and 2-(perfluorooctyl) ethyl acrylate (PFOEA) were synthesized by changing PFOEA contents up to 8 wt% in order to obtain optimal water-repellent properties. In addition, various contents of m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI) from 1 to 4 wt% were added to the above terpolymers with 4 wt% of PFOEA content. The emulsion polymerization was carried out using tridecyl alcohol (EO)7 (TDA-7) as a nonionic surfactant, alkyl dimethyl amine derivatives (ADAD) as a cationic surfactant, and 2,2'-azobis(2-amidinopropane dihydrochoride) (AAPDL) as an initiator. The synthesized copolymers were characterized by FT-IR spectroscopies, contact angle, surface energy, and water-repellency. Surface and thermal properties were analyzed by SEM, TGA, and DSC. It was found that water repellency increased with increasing the contents of PFOEA and TMI.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.99.1-99.1
• /
• 2012

The thin-film photovoltaic absorbers (CdTe and $Cu(In,Ga)Se_2$) can achieve solar conversion efficiencies of up to 20% and are now commercially available, but the presence of toxic (Cd,Se) and expensive elemental components (In, Te) is a real issue as the demand for photovoltaics rapidly increases. To overcome these limitations, there has been substantial interest in developing viable alternative materials, such as $Cu_2ZnSnS_4$ (CZTS) is an emerging solar absorber that is structurally similar to CIGS, but contains only earth abundant, non-toxic elements and has a near optimal direct band gap energy of 1.4 - 1.6 eV and a large absorption coefficient of ~104 $cm^{-1}$. The CZTS absorber layers are grown and investigated by various fabrication methods, such as thermal evaporation, e-beam evaporation with a post sulfurization, sputtering, non-vacuum sol-gel, pulsed laser, spray-pyrolysis method and electrodeposition technique. In the present work, we report an alternative aqueous chemical approach based on chemical bath deposition (CBD) method for large area deposition of CZTS thin films. Samples produced by our method were analyzed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, absorbance and photoluminescence. The results show that this inexpensive and relatively benign process produces thin films of CZTS exhibiting uniform composition, kesterite crystal structure, and some factors like triethanolamine, ammonia, temperature which strongly affect on the morphology of CZTS film.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 1999.10a
• /
• pp.1-45
• /
• 1999

To date many kinds of compounds have been obtained from plants kingdom as antineoplastic and anti-cancerous agents. However, there is no special type of compounds for ncancer therapy. Various types of substances are effective for various types of cancers and tumors: for instance, alkaloids, lignans, terpenes and steroids etc. Curcumol obtained from Curcuma aromatica was tested and noticed to be effective against cancer of the uterine cervix clinically Oridonin isolated from Rabdosia ssp.is now investigated for clinical trials in China. Moreover, camptothecine isolated from Camptotheca acuminata is also antineoplastic alkaloid, but is very toxic. Chemical modification has been tried to decrease its toxicity. This compound is now using as clinical agent. Harringtonin was investigated as an anticancerous drug in China. Taxol, a compound with a taxane ring isolated from the bark of Taxus brevifolia, has been demonstrated to have substantial anticancer activity in patients with solid tumors refractory standard chemotherapy. Supply of this drug has severely limited full exploration of its antineoplastic potential. Some efforts are continued in National Cancer Institute NCI) Washington for surveying various Taxus species for optimal taxol content, improvement in semi-synthesis from baccatin III, improvement in method of extraction, and development of alternative renewable resources. Further, there are many compounds which have been reported as antineoplastic agents. On the other hand, we have screened on higher plants collected in Japan, China, Korea, Southeast Asia and South America for antineoplastic activity, which has been done using Sarcoma 180 ascites in mice, P388 Iymphocytic leukemia in mice, Chinese hamster lung V-79 cells, P388 cells and nasopharynx carcinoma (KB) cells in our laboratory, as primary screening. In this meeting, I will present on antitumor and cytotoxic substances of the higher plants (Rubia cordifolia, Ailanfhus Vilmoriniana, Aster tataricus, Taxus cuspidata var. nana, Cephalotaxus harringtonia var drupacea, etc.) selected from above screening tests.

• Korean Journal of Materials Research
• /
• v.19 no.8
• /
• pp.427-431
• /
• 2009

ZnO wire-like thin films were synthesized through thermal oxidation of sputtered Zn metal films in dry air. Their nanostructure was confirmed by SEM, revealing a wire-like structure with a width of less than 100 nm and a length of several microns. The gas sensors using ZnO wire-like films were found to exhibit excellent $H_2$ gas sensing properties. In particular, the observed high sensitivity and fast response to $H_2$ gas at a comparatively low temperature of $200^{\circ}C$ would lead to a reduction in the optimal operating temperature of ZnO-based $H_2$ gas sensors. These features, together with the simple synthesis process, demonstrate that ZnO wire-like films are promising for fabrication of low-cost and high-performance $H_2$ gas sensors operable at low temperatures. The relationship between the sensor sensitivity and $H_2$ gas concentration suggests that the adsorbed oxygen species at the surface is $O^-$.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.297-305
• /
• 2017

The use of peroxidase in the nitration of phenols is gaining interest as compared with traditional chemical reactions. We investigated the kinetic characteristics of phenol nitration catalyzed by horseradish peroxidase (HRP) in an aqueous-organic biphasic system using n-butanol as the organic solvent and ${NO_2}^-$ and $H_2O_2$ as substrates. The reaction rate was mainly controlled by the reaction kinetics in the aqueous phase when appropriate agitation was used to enhance mass transfer in the biphasic system. The initial velocity of the reaction increased with increasing HRP concentration. Additionally, an increase in the substrate concentrations of phenol (0-2 mM in organic phase) or $H_2O_2$ (0-0.1 mM in aqueous phase) enhanced the nitration efficiency catalyzed by HRP. In contrast, high concentrations of organic solvent decreased the kinetic parameter $V_{max}/K_m$. No inhibition of enzyme activity was observed when the concentrations of phenol and $H_2O_2$ were at or below 10 mM and 0.1 mM, respectively. On the basis of the peroxidase catalytic mechanism, a double-substrate ping-pong kinetic model was established. The kinetic parameters were ${K_m}^{H_2O_2}=1.09mM$, ${K_m}^{PhOH}=9.45mM$, and $V_{max}=0.196mM/min$. The proposed model was well fit to the data obtained from additional independent experiments under the suggested optimal synthesis conditions. The kinetic model developed in this paper lays a foundation for further comprehensive study of enzymatic nitration kinetics.

• Korean Journal of Microbiology
• /
• v.23 no.2
• /
• pp.77-83
• /
• 1985

The aim of this investigation was to resolve the contradiction between the results of Sternberg and Mandels (1980, 1982)and those of Nisizawa et al., (1971) in cellulase induction by sophorose, and furthermore to study the conditional effects in sophorose-induced cellulase induction in Trichoderma reesei QM 9414. Sophorose could induce the synthesis of CMCase and ${\beta}-glucosidase$ simultaneously. Optimal induction medium by sophorose had the potassium citrate buffer solution of pH 3.0-4.0 for CMCase, but one of pH 5.0-6.0 for ${\beta}-glucosidase$. At this time, two different types of ${\beta}-glucosidase$ could be induced by sophorose: one was extracellular and had maximum at pH 5.0, the other was intracellular and had maximum activity at pH6.5. Induction study showed that $methyl-{\beta}-glucoside$ was not a true inducer of ${\beta}-glucosidase$ and that large ${\beta}-glucosidase$ induction could be obtained only by the addition of sophorose into the induction medium. Glucose repressed the induction of cellulase by sophorose. The repression of glucose could not be overcome by the addition of cyclic AMP into the induction medium.

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.2
• /
• pp.127-134
• /
• 2017

For product or process design and development, it is common to optimize multiple responses (characteristics) based on experimental data. To determine optimal conditions, we need to design the experiment, estimate a proper model for each response, and optimize the multiple responses simultaneously. There are several techniques and many research results on optimizing multiple responses simultaneously, when the experimental data are available. However, the experimental design issue for optimizing multiple responses has not been discussed yet. This paper proposes some idea on how to plan screening design when requirements for multiple performance characteristics are to be met in developing new products. A screening design procedure is developed for securing the requirements of multiple responses. Initial design factors are classified into three categories; specific, non-conflicting common, and conflicting common. After screening experiments, follow-up design region search method is suggested with respect to the most unsatisfied or important response, or overall desirability. A case study on a synthesis of melamine formaldehyde resin is presented to illustrate the procedure and to show the validity of the approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1099-1106
• /
• 2018

In this paper, we developed and then analyzed the specifications of the frequency synthesizer which was applied to long range MFR (Multi-function Radar). These specifications were able to guarantee the functions and performance of MFR. MFR was the radar system that used phase array for electronically scanning. This frequency synthesizer made various frequency signals including to STALO (Stable Local Oscillator) for MFR. By analyzing the MFR requirements, we choose the optimal frequency synthesis method and then we got the best performance and functionality including to physical size for this system. We designed and fabricated DDS (Direct Digital Synthesizer)-driven Offset-PLL (Phase Locked Loop) synthesizer to meet the requirements which were low phase noise, fast switching time and low spurious. This synthesizer had less than -131dBc/Hz@100kHz phase noise and less than $4.1{\mu}s$ switching time, respectively.

• Journal of Haehwa Medicine
• /
• v.19 no.1
• /
• pp.25-34
• /
• 2010

Background : The human being and the bacteria have accomplished a balance and have coexisted each other during long time. Probiotics have evolved with the human host to exist and the result they have operated profitably to human host. So it requires that the functions of probiotics are expounded in view of Traditional Korean Medicine. Aim : Suggest the functions of probiotics in view of Traditional Korean Medicine. Method : The author's research has been performed to review the related references. Results : Probiotics assist the absorption of the lactose, proteins and minerals and product several kinds of vitamins, organic acids. Probiotics suppresses the growth of noxious bacteria and the production of harmful substances or gases. They absorbed and discharge the bile acid, and thus help us maintain the optimal level of blood cholesterol concentration. They can reinforce the immune response of the mucous membrane and control the hypersensitivity immune reaction such as asthma, atopy on the other hand. Probiotics have right functions as above and so can be applied widely in treatment of various disease and symptom. Conclusion : Considering the functions of probiotics in view of Traditional Korean Medicine, they participate in our spleen-earth-system (digestion and synthesis) and liver-wood-system (regulation of digestion, metabolism, internal secretion etc.), assist the function of lung-metal system(respiration and regulation of water metabolism) and regulate wi-chi (reinforce/control immune system). Consequently, hereafter there would be a necessity of control a circumstance in treatment of various diseases under these categories that probiotics should be able to do their right functions inside the human body.