• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.237-243
• /
• 2007

Phantoms are very necessary for quality assurance of radio nuclides imaging systems to maintain standards and to ensure reproducibility of test. General quality assurance and instrument quality control are essential in every hospital. The human tissue equivalent materials are aluminum, areryl, water and epoxy..etc. It is very important to select optimum equivalant materials for a phantoms in QC. Especially, paraffin is very similar with human soft tissue in X or Gamma-ray physical characteristics and easy to buy with economically. We made a paraffin thyroid phantom and compare with thyroid areryl phantom, also used commercially in practice. Two small size cold spots(3 and 6 mm diameter) and a hot spot(3 mm diameter) embeded in paraffin phantom. And imaged with $^{99m}TcO_4$ by camera for analysis about spatial resolution and noise at the hot and cold spots. We got some results as below : 1. No difference in counting rate and noise between both arcryl and paraffin thyroid phantoms. 2. The best spatial resolution can be seen 6 cm distance between pinhole collimator and thyroid phantoms(arcryl and paraffin). 3. More optimal spatial resolution could acquired in paraffin thyroid phantom. Paraffin is very similar with human soft tissue in atomic number, density and relative absorbtion function, and can be shaped easily what we wanted. So we can recommendation paraffin as quality assurance phantom because its usefulness, economical benefit and purchasability.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.95-105
• /
• 2003

Because the basic assumptions of deterministic user equilibrium assignment that all network users have perfect information of network condition and determine their routes without errors are known to be unrealistic, several stochastic assignment models have been proposed to relax this assumption. However. it is not easy to solve such stochastic assignment models due to the probability distribution they assume. Also. in order to avoid all path enumeration they restrict the number of feasible path set, thereby they can not preciously explain the travel behavior when the travel cost is varied in a network loading step. Another problem of the stochastic assignment models is stemmed from that they use heuristic approach in attaining optimal moving size, due to the difficulty for evaluation of their objective function. This paper presents a logit-based stochastic assignment model and its solution algorithm to cope with the problems above. We also provide a stochastic user equilibrium condition of the model. The model is based on path where all feasible paths are enumerated in advance. This kind of method needs a more computing demand for running the model compared to the link-based one. However, there are same advantages. It could describe the travel behavior more exactly, and too much computing time does not require than we expect, because we calculate the path set only one time in initial step Two numerical examples are also given in order to assess the model and to compare it with other methods.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.63-67
• /
• 2010

Purpose: A tension pneumothorax is a fatal condition that requires immediate intervention. Although a definitive treatment for a tension pneumothorax is a tube thoracostomy, needle decompression can provide temporary relief, that is lifesaving. The traditional procedure for needle decompression involves inserting a needle or catheter at the second intercostal space, the midclavicular line. Recent evidence suggests that the commonly used catheters do not have sufficiently penetrate the chest wall. There are also claims that a lateral approach to needle decompression is easier and safer than the traditional anterior approach. The purpose of this study is to evaluate the optimal approach for needle decompression for the Korean population by measuring chest wall thicknesses at the points used for both the anterior and the lateral approaches. Methods: The chest wall thickness (CWT) of trauma victims who visited the Emergency Center of Pusan National University Hospital was measured by computed tomography (CT) images. The CWT was measured at the points used for the anterior and the lateral methods and was compared with the length of commonly used catheters, which is 45 mm. Results: The mean CWT at the second intercostal space, the midclavicular line, was shorter than the CWT at the 5th intercostal space, the anterior axillary line. However, the percentage of patients whose CWT was greater than 45 mm was larger when measured anteriorly (8.2%) that when measure laterally (5.7%). Female patients and those older than 60 were more likely to have an anterior CWT greater than 45 mm (28.2% for females and 15.5% for those older than 60). Conclusion: The percentage of trauma victims in Korea whose CWT is greater than 45 mm is lower than the values previously reported by other countries. However, females and older patients tend to have thicker chest walls, so the lateral approach would be suggested when performing needle decompression for such patients with suspected tension pneumothoraces.

• Korean Journal of Veterinary Research
• /
• v.36 no.1
• /
• pp.109-118
• /
• 1996

The Salmonella rfb gene encoding for the biosynthesis of the oligosaccharide-repeating units of the O-antigenic determinants was cloned and sequenced. A set of nucleotide primers(a forward and reverse) was selected to target a defined region of the guanosine diphospho-mannose(GDP-Man) pyrophosphorylase synthase gene : rfbM of Salmonella C serogroup. The primer set was used to develop a PCR-based rapid and specific detection system for Salmonella C1 serogroup. Amplification bands of predicted size(1,422bp) were generated from 11 different Salmonella C1 isolates. The bands were verified to be specific for the C1 serogroup by Southern blot analysis using reference homologous DNA specificity was further confirmed by the lack of reactivity with heterologous DNA derived from non-salmonella members of the family enterobacteriaeceae. A specificity of 100% was deduced along with a very high sensitivity shown by a detection limit of 1fg of a purified DNA template. The isolated DNA sequence was found to be 99.8% homologous to S montevideo but the related primers amplified with the predicted band sizes with all the Salmonella C1 serogroups tested. It is concluded that the PCR protocol based on the rfbM gene from S cholerasuis is optimal fast and specific for the detection of Salmonella C1 serogroup and also the corresponding probe is suitable for rapid detection of all Salmonella C1 serogroup DNA tested. This technology should facilitate the identification of contaminated pig products and for any other products contaminated with the Salmonalla C1 serogroup. The immediate impact of this developed method will be in the area of food safety of pig products with the potential prospect for adaptation to other food inspection technologies.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.175-182
• /
• 2009

The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

• Korean Journal of Environmental Biology
• /
• v.32 no.4
• /
• pp.353-362
• /
• 2014

In this study, we investigated the effect of geographical variations on Sargassum thunbergii morphology to make a taxonomic reconsideration about infraspecific taxa in this species. In order to examine the morphological characteristics of S. thunbergii, total 27 matured and morphologically intact thalli were collected from the east, west and south coast in spring 2011. Interestingly, it was observed that the species populations on the west coast were characterized by short, thin and coarse thallus, and soft texture. However, the populations on the east coast showed thicker thallus, larger leaf and vesicle, and tougher texture. Thallus height of S. thunbergii was found to be similar at both east and west coast. Further, the height of the thallus and lateral branch of the species populations residing south coast were highest whereas the size of leaf and vesicle are shortest, in comparison with east and west coast species. Although morphological characteristics of the north east coast populations corresponded to the original description of S. thunbergii f. latifolium, we could not find exact morphological features and diagnostic characters to distinguish form in S. thunbergii. These results indicated that it is not the optimal characteristics to identify infraspecific form in this species. In contrast, morphological variations may signify the adaptation of this species to local environmental factors. Thus, we recommend that intraspecific morphological variation of S. thunbergii should be carefully used to identify infraspecific taxa.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.64-69
• /
• 2008

The objective of experiment was to investigate the effects of planting density on growth and yield of vegetable soybean, and to clarify the optimum planting density of vegetable soybean in the middle west region of Korea. The field experiment with 4 levels of planting density was carried out at Yesan area in $2005{\sim}2006$. The days from seeding to flowering and the days from seeding to harvesting and lodging were not significantly different among planting distance. The stem length was increased as planting distance was shortened but the number of node, branch, pod per branch, pod per individual, weight of stem and pod, one hundred pod weight and rate of 2+3 seed per pod were decreased as planting density was increased. The size of vegetable soybeans was not significantly different among planting distance, but the harvest index of vegetable soybean was decreased as planting distance was shortened. Yield of vegetable soybean was increased as planting distance was decreased. However, the approriate densities for stem and pod weight per a plant, number of pod per a branch and the vegetable soybean yield of 2+3 seed per pod were different from that density. The optimal planting distance of varieties was $60{\sim}25\;cm$ in Sunheukkong and Ilpumgeomjeongkong and was $60{\sim}35\;cm$ in Galmikong.

• Korean Journal of Animal Reproduction
• /
• v.24 no.3
• /
• pp.299-309
• /
• 2000

This study was performed 1) to establish the optimal PCR condition of sex determination in Hanwoo IVM/IVF embryos, 2) to examine the sex determination and sex ratio to the developmental stages of Hanwoo IVM/IVF embryos by two-step PCR method. The sexing of bovine IVF embryos were accurately determined by PCR methods using Y chromosome specific DNA primer(BOV 97M, 141bp) and bovine specific DNA primer(216bp). The fregment size were shown at 141 and 216 base pairs(bp) in male, and 216 bp in female. Two-steps PCR method in which the samples were amplified by 15 cycles with Y chromosome specific DNA primer and then amplified by additional 30 cycles with bovine specific DNA primer was effective in the sexing of bovine IVF embryos. The zona-free embryos were more effective than zona-intact embryos in bovine IVF embryo sexing. The appearance of Y chromosome specific band was 45.2% in embryos treated with protease K and 53.3% in embryos treated with freezing and thawing repeatedly. The optimun volume of DNA for sexing of Hanwoo IVF embryos were 2 to 10 $\mu$1 in Zona-free embryos and 12 to 13 $\mu$1 in zona-intact embryos. The sexing rate of bovine IVF embryos by PCR was 96.0% and questionable rate not identified sex was 4.0%, respectively. Among the sexed embryos, the percentage of male and female was 49.7% and 46.3%, respectively, the sex ratio was 1: 1.1. The successful rate of embryo sexing was increased to the developmental stages.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.147-155
• /
• 1991

Enterotoxigenic E. coli is one of the major causative agents of the infantile diarrhea and traveler's diarrhea. The heat-stable enterotoxin(ST) is thought to be a virulence factor in the pathogenesis of the diarrhea and to be a maker for identification of the enterotoxingeic E. coli from non pathogenic E. coli. The isolate of enterotoxigenlc E. coli was isolated from swine during 1989 year(from 5 to 10 month) in the Kyong-gi and Chung-Cheong provinces, and three strains(KM-4, KM-7 and KM-12) was selected from 189 isolates of ST producing E. coli. The detection of a ST produced of the isolated E. coli was performed by the infant mouse assay(IMA). This study was designed to know optimal conditions for the production of the ST and the molecular properties of plasmids of the enterotoxigenic E. coli. Amount of ST produced were the most at initial pH 8.5~9.0 of succinate salts medium culture. The cultural time of the same medium was accumulated the highest level of ST was at the 14 to 16 hours, and then stationary phase was at the 20 hours. From this experiment the KM-7 strain was selected among ST producing strains by IMA. Partial plasmid-curing experiment was done to select plasmid encoding for ST among other plasmids and then comparing the plasmid pattern of ST producing strain(KM-7) with those of other ST non-producing strains, it is found that ST gene exists on the about 80 Kbp plasmid. Each fragment of this plasmid digested with EcoRl was ligated to vector pBR 322 and transformed into E. coli K-12. A clone producing ST(eKT 53) was selected by IMA. The EcoRl digestion pattern of the isolated plasmid(pKD 37) from the ST producing clone it is indicated that the size of the inserted fragment in eKT 53 strain is 16 Kbp. The cultured supernatant of eKT 53 strain was positive result of ST production in IMA.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.532-538
• /
• 2020

In this study, emulsification process were conducted to manufacture the natural sunscreen from raw materials such as shea butter, olive emulsifier wax, and green tea extract. The emulsification was optimized by using the central composite design model-response surface methodology (CCD-RSM) where the response values were established as the mean droplet size (MDS) and emulsion stability index (ESI) after 7 days in addition to UV absorbance at 300nm. The amount of emulsifier and additives and emulsification time were established as operating variables and the optimal conditions of sunscreen emulsification were accepted as 3.70, 2.47 wt.%, and 15.42 min, respectively according to the result of CCD-RSM. On the other hand, the response values were estimated as 1173.80 nm and 99.56% for MDS and ESI, respectively, after 7 days, in addition to UV absorbance at 300 nm (2.47). The average error from actual experiments was a low level as about 3.0 ± 1.5%, which is mainly due to the fact that the optimization using CCD-RSM applied in this study was in the relatively high significant level.