• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.454-461
• /
• 2005

텔레매틱스의 주요 응용분야인 차량 항법 시스템은 CIS의 지도기술과 CPS의 측위 기술에 융합되어 탄생한 것이다. 기존의 시스템들은 정점과 정점간의 최단경로를 중심으로 한 경로 탐색을 제시하였지만 교통량의 변화와 교통사고 및 수시 병목 구간 등의 교통 변화에 대해서는 능동적인 대처를 할 수 없는 시스템이다. 바꿔 말하면 현실적으로 최단경로 탐색보다는 교통 정보를 파악하며 최단시간에 목적지로 도착하는 최적경로 탐색 시스템이 필요하다. 이 논문에서는 교통 정보를 기반으로 최적경로를 탐색하는 알고리즘을 제안한다. 구체적으로 최적 경로 탐색을 위한 시스템 구조를 제안하며 기존의 최단경로 탐색 알고리즘의 문제점을 살펴보고 수집되는 교통정보의 방향성을 활용하는 최적경로 탐색 알고리즘을 새롭게 제안한다.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.156-161
• /
• 1997

In this thesis, based on Genetic Algorithm, a new route search algorithm is presented to search an optimal route between the origin and the destination in intelligent route guidance systems in order to minimize the route traveling time. The proposed algorithm is effectively employed to complex road networks which have diverse turn constrains, time-delay constraints due to cross signals, and stochastic traffic volume. The algorithm is also shown to significantly promote search efficiency by changing the population size of path individuals that exist in each generation through the concept of age and lifetime to each path individual. A virtual road-traffic network with various turn constraints and traffic volume is simulated, where the suggested algorithm promptly produces not only an optimal route to minimize the route cost but also the estimated travel time for any pair of the origin and the destination, while effectively avoiding turn constraints and traffic jam.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.569-571
• /
• 1995

This paper compares the simulated annealing and the Hopfield neural network method for an optimal routing in a multistage interconnection network(MIN). The MIN provides a multiple number of paths for ATM cells to avoid cell conflict. Exhaustive search always finds the optimal path, but with heavy computation. Although greedy method sets up a path quickly, the path found need not be optimal. The simulated annealing can find an sub optimal path in time comparable with the greedy method.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.204-213
• /
• 1999

This paper suggests a numerical method of finding optimal geometric path and minimum-time motion for a manipulator arm. To find the minimum-time motion, the optimal geometric path is searched first, and the minimum-time motion is searched on this optimal path. In the algorithm finding optimal geometric path, the objective function is minimizing the combination of joint velocities, joint-jerks, and actuator forces as well as avoiding several static obstacles, where global search is performed by adjusting the seed points of the obstacle models. In the minimum-time algorithm, the traveling time is expressed by the linear combinations of finite-term quintic B-splines and the coefficients of the splines are obtained by nonlinear programming to minimize the total traveling time subject to the constraints of the velocity-dependent actuator forces. These two search algorithms are basically similar and their convergences are quite stable.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.189-197
• /
• 2012

본 논문에서는 위성과 모바일기기 간의 전파수신감도를 활용한 최적경로탐색 알고리즘을 제안한다. 일반적인 경로탐색은 최단경로를 기반으로 하기 때문에 위성을 이용하는 모바일기기의 안정적인 멀티미디어 서비스 제공이 어렵다. 제안된 알고리즘은 전파수신감도를 기반으로 하는 경로탐색을 통해 안정적인 통신환경의 제공을 목적으로 한다. 위성통신에서 수신환경에 따라 전파수신감도 변화가 심하기 때문에 수신환경의 특성을 정확하게 분석하는 것이 매우 중요하다. 전파감쇠 요인으로 대기감쇠, 수풀감쇠, 건물에 의한 감쇠 등을 적용하여 시뮬레이션을 통해 분석하고 전파수신감도로 활용한다. 제안된 알고리즘은 도심지에서 위성을 활용한 안정적인 멀티미디어 서비스 제공을 위한 최적경로를 찾을 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1133-1137
• /
• 1995

This paper presents a numerical method of the global search for an optimal geometric path for a manipulator arm amid obstacles. Finite term quintic B-splines are used to describe an arbitrary point-to-point manipulator motion with fixed moving time. The coefficients of the splines span a linear vector space, a point in which uniquely represents the manipulator motion. All feasible geometric paths are searched by adjusting the seed points of the obstacle models in the penetration growth distances. In the numerical implementation using nonlinear programming, the globally optimal geometric path is obtained for a spatial 3-link(3-revolute joints) manipulator amid several hexahedral obstacles without simplifying any dynamic or geometric models.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.97-108
• /
• 1997

For the purpose of decreasing economic loss from the traffic jam, a car route guidance system efficiently utilizing the existing roads has attracted a great deal of attention. In this paper, the search algorithm for optimal path and alternative paths, which is the main function of a car route guidance system, was presented using evolution program. Search efficiency was promoted by changing the population size of path individuals in each generation, applying the concept of age and lifetime to path individuals. Through simulation on the virtual road-traffic network consisting of 100 nodes with various turn constraints and traffic volumes, not only the optimal path with the minimal cost was obtained, avoiding turn constraints and traffic congestion, but also alternative paths with similar costs and acceptable difference was acquired, compared with optimal path.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.1-9
• /
• 2023

This paper presents an optimal path planning strategy for aerial searching and surveying of a user-designated area using multiple Unmanned Aerial Vehicles (UAVs). The method is designed to deal with a single unseparated polygonal area, regardless of polygonal convexity. By defining the search area into a set of grids, the algorithm enables UAVs to completely search without leaving unsearched space. The presented strategy consists of two main algorithmic steps: cellular decomposition and path planning stages. The cellular decomposition method divides the area to designate a conflict-free subsearch-space to an individual UAV, while accounting the assigned flight velocity, take-off and landing positions. Then, the path planning strategy forms paths based on every point located in end of each grid row. The first waypoint is chosen as the closest point from the vehicle-starting position, and it recursively updates the nearest endpoint set to generate the shortest path. The path planning policy produces four path candidates by alternating the starting point (left or right edge), and the travel direction (vertical or horizontal). The optimal-selection policy is enforced to maximize the search efficiency, which is time dependent; the policy imposes the total path-length and turning number criteria per candidate. The results demonstrate that the proposed cellular decomposition method improves the search-time efficiency. In addition, the candidate selection enhances the algorithmic efficacy toward further mission time-duration reduction. The method shows robustness against both convex and non-convex shaped search area.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.21-31
• /
• 2005

In state-of-the-art games, characters can move in a goal-directed manner so that they can move to the goal position without colliding obstacles. Many path-finding methods have been proposed and implemented for these characters and most of them use the A* search algorithm. When .the map is represented with a regular grid of squares or a navigation mesh, it often takes a long time for the A* to search the state space because the number of cells used In the grid or the mesh increases for higher resolution. Moreover the A* search on the grid often causes a zigzag effect, which is not optimal and realistic. In this paper we propose to use visibility graphs to improve the search time by reducing the search space and to find the optimal path. We also propose a method of taking into account the size of moving characters in the phase of planning to prevent them from colliding with obstacles as they move. Simulation results show that the proposed method performs better than the grid-based A* algorithm in terms of the search time and space and that the resulting paths are more realistic.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.565-569
• /
• 2007

최적경로 탐색은 텔레매틱스에서 효용가치가 높은 기술이다. 그렇지만 기존 시스템의 최단 경로가 항상 최적 경로라고 볼 수 없다. 즉 도로위에서는 이동시간이 최소인 경로를 최적경로라고 정의할 수 있다. 이런 최적경로를 탐색하기 위한 여러 가지의 기술 및 알고리즘들이 존재한다. 계층 경로 알고리즘은 로드 네트워크를 주, 부 레이어로 나누어 경로를 탐색한다. 2단계로 나누어 경로를 탐색하기 때문에 경로 탐색 연산시간의 성능은 뛰어나다. 탐색되는 경로 또한 최적 경로에 가까운 결과를 가진다. 2단계로 계층을 분할 할 때, 부 도로를 포함하는 주요도로 영역의 할당 방법은 성능에 큰 영향을 미친다. 본 논문에서는 계층 경로 알고리즘에서의 주요도로 선정을 위한 탐색 영역 결정 기법에 대하여 제안한다. 그리고 제안한 기법을 계층 경로 탐색에 적용하는 방법을 기술한다.