• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.6
• /
• pp.25-37
• /
• 2000

The trajectories of feature points can be defined by the correspondences between points in consecutive frames. The correspondence problem is known to be difficult to solve because false positives and false negatives almost always exist in real image sequences. In this paper, we propose a robust feature tracking algorithm considering incomplete trajectories such as entering and/or vanishing trajectories. The trajectories of feature points are determined by calculating the matching measure, which is defined as the minimum weighted Euclidean distance between two feature points. The weights are automatically updated in order to properly reflect the motion characteristics. We solve the correspondence problem as an optimal graph search problem, considering that the existence of false feature points may have serious effect on the correspondence search. The proposed algorithm finds a local optimal correspondence so that the effect of false feature point can be minimized in the decision process. The time complexity of the proposed graph search algorithm is given by O(mn) in the best case and O($m^2n$) in the worst case, where m and n arc the number of feature points in two consecutive frames. By considering false feature points and by properly reflecting motion characteristics, the proposed algorithm can find trajectories correctly and robustly, which has been shown by experimental results.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.55-61
• /
• 2009

This paper describes a point of production(POP) system which collects and manages real-time shop floor machining information in a wafer dicing process. The system are composed of POP terminal, line controller and network. In the configuration of the system, LAN and RS485 network are used for connection with the upper management system and down stratum respectively. As a bridge between POP terminal and server, a line controller is used. The real-time information which is the base of production management are collected from information resources such as machine, product and worker. The collected information are used for the calculation of optimal cutting condition. The collection of the information includes cutting speed, spout of pure water, accumulated count of cut in process for blade and wafer defect. In order to manage machining information in wafer dicing process, production planning information is delivered to the shop floor, and production result information is collected from the shop floor, delivered to the server and used for managing production plan. From the result of the system application, production progress status, work and non-working hour analysis for each machine, and wafer defect analysis are available, and they are used for quality and productivity improvements in wafer dicing process. A case study is implemented to evaluate the performance of the system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.216-225
• /
• 2023

This paper describes the finite element analysis and die design change of cold heading punching process to increase the cold forging tool life and reduce the tool wear and stress concentration. Through this study, the optimization of punch tool design has been studied by an analysis of tool stress and wear distribution to improve the tool life. Plastic deformation analysis was carried out in order to understand the cold heading process between tool and workpiece stress distribution. Cold heading punch die design was set up to each process with different four types analysis progressing, the cold heading punch dies shapes with combination of point angle and punch edge corner radius shapes of cold forging dies, punch die material properties and frictional coefficient. The design parameters of point angle and corner radius of punch die geometry, die material properties and frictional coefficient were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the cold heading punch die design parameters optimization for bolt head cold forging process, it was possible to expect an reduce the cold heading punch die wear to the 37 % compared with current using cold heading punch in the shop floor.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.103-111
• /
• 2020

Performance indicators have often investigated and developed in order to identify foundational elements and factors for an enhancement of performance in sports. In order to identify the valid performance indicators it is important that the indicators used within a performance analysis system discriminate between the winning and losing performances within a match (Hughes and Bartlett, 2002). However, the performance indicators proposed in research studies on basketball performance have not been used for real-time analysis and feedback within a coaching context. Such real-time support for the coach and players has been described within research on other sports (Choi et al., 2004; O'Donoghue, 2001; Palmer et al., 1997). Within the process of real-time feedback, the identification of relevant performance indicators that distinguish winning and losing performances should be the first stage of the development of a real-time analysis system. Therefore, this study investigated the differences between winning and losing teams in terms of a set of performance indicators gathered during the analysis of 10 English National Basketball League matches. Winning and losing teams were compared using whole match data (N=10) as well as individual quarters (N=40). A series of Wilcoxon Signed Ranks tests was used to identify the relevant performance indicators that discriminate between winning and losing performers within whole matches and individual quarters. The tests found that 3 point shots made (p<0.05) and Assists (p<0.05) were significantly different between winning and losing teams within matches. However, 2 point shots made (p<0.05), 2 point shots attempted (P<0.05), percentages of 2 point shots scored (p<0.05), 3 point shots made (p<0.05), Defensive Rebounds (p<0.05) and Assists (p<0.05) were significantly different between winning and losing performance within quarters. The analysis task should be based on relevant performance indicators which explain the current performances to performance analysts and coaches. Within a real-time analysis and feedback scenario, this will have the additional benefit of supporting a decision based on immediate performance within the most recent quarter. Consequently, the real-time analysis system would use performance indicators which have the property of construct validity to support the decisions of the coach.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.203-211
• /
• 2014

Tunnel reduces travel time as and it is essential facilities for the eco-friendly road construction. In recent years, It has been accelerating the tunnel construction to provide a higher level of traffic service but a driver driving in the narrow and dark tunnel takes characteristically psychological anxiety and the restriction of the sight. Moreover, A driver passing through more than 1,000m long tunnel, as to pass inside the monotonous form of the tunnel for a long time can cause drowsiness and increase the driver load. This driver load can degrade road-holding of the inside of the long tunnel highly and pose a high risk of accidents. Accordingly, In this study is to present the proper length of the Tunnel, considering the characteristics of traffic accident. For this, this study is that the long tunnel that affects traffic safety traffic safety variables are selected and classified. Traffic safety variables are classified in detail as a variable of the traffic accident and velocity one, the applicable variables the number of the traffic accident, the ratio of the traffic accident, driving velocity, the individual vehicle velocity etc. Traffic safety variables are categorized as more than a pole length of the tunnel in order to examine its impact on correlation analysis. The results indicate significant results in traffic accidents in accordance with traffic accidents, traffic safety, selects the variable was Variable depending on the length of the tunnel traffic safety point of significantly increasing the possibility of an accident can be seen as a high point. And the point of the Distribution of selected variables in order to create a traffic safety was a significant increase in traffic safety variables was set at critical intervals. Before reaching the critical point and the corresponding length of the long tunnel was set at the proper length. In this study, the optimum length of the proposed long tunnel through the long tunnel that occur in the future to contribute to reducing traffic accidents would be able to be determined.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.55-64
• /
• 2022

The potassium cream soap with fatty acid called cleaning foam has a crystal gel structure, and unlike an emulsion system, it is weak to shear stress and shows characteristics that are easily separated under high temperature storage conditions. The crystal gel structure of cleansing foams is significantly influenced by the nature and proportion of fatty acids, degree of neutralization, and the nature and proportion of polyols. In order to investigate the effect of these parameters on the crystal gel structure, a ternary system consisting of water/KOH/fatty acid was investigated in this study. The investigation of differential scanning calorimeter (DSC) revealed that the eutectic point was found at the ratio of myristic acid (MA) : stearic acid (SA) = 3 : 1 and ternary systems were the most stable at the eutectic point. However, the increase in fatty acid content had little effect on stability. On the basis of viscosity and polarized optical microscopy (POM) measurements, the optimum degree of neutralization was found to be about 75%. The system was stable when the melting point (T_m) of the ternary system was higher than the storage temperature and the crystal phase was transferred to lamellar gel phase, but the increase in fatty acid content had little effect on stability. The addition of polyols to the ternary system played an important role in changing the T_m and causing phase transition. The structure of the cleansing foams were confirmed through cryogenic scanning electron microscope (Cryo-SEM), small and wide angle X-ray scattering (SAXS and WAXS) analysis. Since butylene glycol (BG), propylene glycol (PG), and dipropylene glycol (DPG) lowered the T_m and hindered the lamellar gel formation, they were unsuitable for the formation of stable cleansing foam. In contrast, glycerin, PEG-400, and sorbitol increased the T_m, and facilitated the formation of lamellar gel phase, which led to a stable ternary system. Glycerin was found to be the most optimal agent to prepare a cleansing foam with enhanced stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2199-2214
• /
• 1994

In order to sufficiently utilize the potential effectiveness of ATM networks, systematic and effective network management and control systems must be employed. In addition to network design, planning, and call routing techniques used in traditional circuit-switched networks. ATM networks can provide logical VP(Virtual Path) reconfiguration capabilities which can adapt to changes in the network environment. With a proper application of the VP reconfiguration technique, ATM networks can reduce the overhead of frequent network redesign and the overhead of call routing processing. However, ATM VP reconfiguration is a very complex and difficult problem which consists of many facets of optimization subproblems such as VP routing. VP sizing, VP terminating point location and VC routing. Most previous research on the ATM logical network reconfiguration problem dealt with the subset of the problem. This paper mathematically formulates the ATM network reconfiguration problem completely considering all subproblems. Since it is very difficult to derive the optimal solution of the formulated problem, we develop a heuristic method based on a Max min bandwidth allocation principle. We show the feasibility of the proposed heuristic method with a simple example.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.680-686
• /
• 2011

The purpose of this study was to analyze information about food and nutrition topics presented throughout the television broadcast media, thereby find out the optimal communication method to give desirable information to the general public. To perform this study were recruited and trained by monitoring education before and during the study. 3 domestic TV channels were selected to be monitored, for 3 months. Results of this study were as follows: First, the total reporting cases of information about foods and nutrition were 154, When each monitored contents was seen from the domain of programs, 128 cases(83.1%) were from current affairs and information program, and 26(16.9%) were from entertainment program. Second, according to survey by channel cases are 26(16.9%) from KBS, 54 cases(35.1%) from MBC, 74 cases(48.1%) from SBS, which means SBS reported the most about nutritional foods. Third, the frequency of reporting information on the overall diet and food & ingredient, cuisine & cookey, health & diet therapy and obesity & diet in order. Forth, among the 26 cases of positive or negative implications made by each cannel of KBS, 18 cases were delivered in positive ways, 7 cases had positive and negative point of views mix together, and 1 cases was negatively delivered. Finally, the most important thing is to organiae the advisory team by connecting mass media and specialist, and the educational program of nutrition should be developed for the communication of right information about foods and nutrition.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.216-221
• /
• 2008

Shape design optimization for linear elasticity problem is performed using isogeometric analysis method. In many design optimization problems for real engineering models, initial raw data usually comes from CAD modeler. Then designer should convert this CAD data into finite element mesh data because conventional design optimization tools are generally based on finite element analysis. During this conversion there is some numerical error due to a geometry approximation, which causes accuracy problems in not only response analysis but also design sensitivity analysis. As a remedy of this phenomenon, the isogeometric analysis method is one of the promising approaches of shape design optimization. The main idea of isogeometric analysis is that the basis functions used in analysis is exactly same as ones which represent the geometry, and this geometrically exact model can be used shape sensitivity analysis and design optimization as well. In shape design sensitivity point of view, precise shape sensitivity is very essential for gradient-based optimization. In conventional finite element based optimization, higher order information such as normal vector and curvature term is inaccurate or even missing due to the use of linear interpolation functions. On the other hands, B-spline basis functions have sufficient continuity and their derivatives are smooth enough. Therefore normal vector and curvature terms can be exactly evaluated, which eventually yields precise optimal shapes. In this article, isogeometric analysis method is utilized for the shape design optimization. By virtue of B-spline basis function, an exact geometry can be handled without finite element meshes. Moreover, initial CAD data are used throughout the optimization process, including response analysis, shape sensitivity analysis, design parameterization and shape optimization, without subsequent communication with CAD description.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.421-434
• /
• 2018

Decision-makers have different and sometimes conflicting goals with utilities in operating dam reservoirs. As repeated interactions exist between decision-makers in the long-term, and the utility of each decision-making organization is affected not only by its selected strategy, but also by other rivals' strategies; selecting and prioritizing optimum strategies from a decision maker's point of view are of great importance while interacting with others. In this paper, a model based on a fuzzy set theory, for determining the priority of decision-makers' strategies in optimal qualitative-quantitative operation management of dam reservoir is presented. The fuzzy priority matrix is developed via defining membership functions of a fuzzy set for each decision maker's strategies, so that all uncertainties are taken into account. This matrix includes priorities assigned to possible combination for other decision makers' strategies in bargaining with each player's viewpoint. Here, the 15-Khordad Dam located in the central part of Iran, suffering from low water quality, was studied in order to evaluate the effectiveness of the model. Then, the range of quality of water withdrawal agreed by all decision-makers was determined using the prioritization matrix based on fuzzy logic. The results showed that the model proposed in the study had high effectiveness model.