• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

In a traditional hierarchical inventory system, direct orders are the only information for inventory management that is exchanged between the firms involved. But due to the rapid development of modern information technology, it becomes possible for the firms to share more information in real time, e.g. demand and inventory status data. And so the term Supply Chain has emerged because it is seen as an important source of competitive advantage. Now it is possible to challenge traditional approaches to inventory management. In the past, one of the de-facto assumptions for inventory management was that the demand pattern follows a specific distribution function. However, it is undesirable to apply this assumption in real situations because the demand information in the supply chain tends to be distorted due to the bullwhip effect in a supply chain. To overcome this weakness, we propose a new solution method using NN (Neural Network). Our method proceeds in three steps. First, we find the patterns of optimal reorder points by analyzing past data. Second. train the NN using these pattern data and finally decide the reorder point. Using simulation experiment, we show that the proposed solution method gives better result than that of traditional research.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.50-54
• /
• 2016

In this paper, a hybrid method is proposed to design an air-core superconducting solenoid system for 6 T axial uniform magnetic field using Niobium Titanium (NbTi) superconducting wire. In order to minimize the volume of conductor, the hybrid optimization method including a linear programming and a nonlinear programming was adopted. The feasible space of solenoid is divided by several grids and the magnetic field at target point is approximated by the sum of magnetic field generated by an ideal current loop at the center of each grid. Using the linear programming, a global optimal current distribution in the feasible space can be indicated by non-zero current grids. Furthermore the clusters of the non-zero current grids also give the information of probable solenoids in the feasible space, such as the number, the shape, and so on. Applying these probable solenoids as the initial model, the final practical configuration of solenoids with integer layers can be obtained by the nonlinear programming. The design result illustrates the efficiency and the flexibility of the hybrid method. And this method can also be used for the magnet design which is required the high homogeneity within several ppm (parts per million).

• Human Ecology Research
• /
• v.58 no.1
• /
• pp.121-130
• /
• 2020

This study evaluated the quality characteristics of semi-dried noodles prepared with various dry rice flours (0, 25, 50, 75, and 100%) in order to develop the most preferred noodle recipe and to increase rice consumption. Amylography measured the viscosity of composite dry rice flour-wheat flour and indicated that the gelatinization point and maximum viscosity decreased as the level of dry rice flour increased. Both L and a values for cooked noodle significantly increased as the dry rice flour increased; however the L value decreased for uncooked of noodles. Weight, volume and water absorption of cooked semi-dried noodles significantly decreased as the dry rice flour increased; however the turbidity of soup increased. Texture properties such as hardness, springiness, cohesiveness, and adhesiveness decreased as the level of dry rice flour increased. As the amount of rice flour added increased, large particles of gluten were reduced while smaller particles of starch increased by scanning electron microscopy (SEM). The color, taste, and overall preference of 75% noodles were the highest in the sensory characteristics. The results, showed that the addition of dry rice flour positively affects the overall sensory characteristics of semi-dried noodle with 75% representing the optimal level for addition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1237-1244
• /
• 2004

The orthodontic surgery including lingual orthodontics has recently attracted a person's attention due to its functional and esthetic appreciation. The skeletal anchorage with the miniscrew is newly adopted in the lingual orthodontics to assist the upholding ability. The appliciation needs to understand the mechanism of the orthodontic appliance and its related orthodontic correction for optimal orthodontic treatment. There is, however, few information about the qualitative and quantitative effect of the orthodontic appliance with the miniscrew has not been well identified. In this paper, three dimensional finite element analysis is introduced to the lingual orthodontics in order to investigate the effect of the anterior retraction force on the miniscrew and transpalatal arch wire. The analysis determines the adequate location of the miniscrew and the point of force application of the anchorage system in the lingual orthodontics. The analysis results demonstrate the effect of the position of the miniscrew and the transpalatal arch wire on the lingual orthodontics.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.666-674
• /
• 2016

In this paper, a high efficiency satellite electrical power supply system is proposed. The increased efficiency of the power supply system allows for downscaling of the solar array and battery weight, which are among the most important satellite design considerations. The satellite power supply system comprises two units, namely a generation unit and a storage unit. To increase the efficiency of the solar array, a maximum power point tracker (MPPT) is used in the power generation unit. In order to improve the MPPT performance, a novel algorithm is proposed on the basis of the hill climbing method. This method can track the main peak of the array power curve in satellites with long duration missions under unpredicted circumstances such as a part of the array being damaged or the presence of a shadow. A lithium-ion battery is utilized in the storage unit. An algorithm for calculating the optimal rate of battery charging is proposed where the battery is charged with the maximum possible efficiency considering the situation of the satellite. The proposed system is designed and manufactured. In addition, it is compared to the conventional power supply systems in similar satellites. Results show a 12% increase in the overall efficiency of the power supply system when compared to the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1186-1194
• /
• 2012

In order to resolve the energy efficiency in wireless sensor networks, a multihop transmission technique is utilized. However, multihop transmission in wireless sensor networks (WSN) has pros and cons. It reduces total energy consumption, while it may cause a severe decrease in network lifetime. To solve this problem, we suggest the so called strike and bargaining algorithm (SBA). The routing path is determined by wages of nodes. Each node negotiates its wage with their neighbor nodes and determine a reasonable value to reach a optimally balanced point. By analysis and simulations, we show SBA can achieve a near optimal solution.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.18-25
• /
• 2018

Both injection and injection molding dies have evolved into advanced technology. Product quality is also evolving day after day. Therefore, the conditions of the injection mold and the injection conditions are becoming important. In order to improve the quality of the product, the Hardware part of the mold has developed as an advanced technology, and the Software part has also developed with advanced technology. This study deals with the cooling part, which is part of the hardware. In addition to fluid cooling, which is commonly used in the industry, by using gas cooling identify the phenomena that appear on the surface of the product and the critical point strain of the product to find the optimal cooling. Electronic parts and automobile parts whose surface condition is important, the cooling process is important to such a degree that they are divided with good products and defective products according to the cooling process at the time of injection. By controlling this important cooling and reducing the injection time with additional cooling, the product quality can be increased to the highest production efficiency. In addition, high efficiency can be achieved without additional investment costs. This study was conducted to apply these various advantages in the field.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.759-767
• /
• 2005

This research is to substantially analyze the economic value of portable Internet (WiBro), WCDMA High Speed Downlink Packet Access (HSDPA), WiBro+VoIP, and WiBro+DMB regarded as the next generation of broadcasting. Based on the empirical analysis of economic values, we provide the optimal paths of converged communications and broadcasting services related to WiBro. 1,000 Internet users in the Seoul and Gyeonggi areas were surveyed in their homes. The collected survey was calculated as an accurate economic value distribution for relevant services, and the average and mean were taken using a parametric logit model, semi-parametric Spike model, and nonparametric Turnbull and Kernel estimations in order to analyze the contingent economic value of the amount offered to the subjects of the analysis. The contingent value analysis results varied slightly according to the different methodologies; however, all showed the following common features. The economic value of WiBro, Internet-based WCDMA, VoIP, and DMB with WiBro appeared to be similar. Therefore, if WiBro and WCDMA (HSDPA) form a competitive relationship, the types of bundled services offered as portable Internet service and the supply point of such bundled services are expected to emerge in a strategic plan for stimulating service markets and the prior occupation of the market.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.159-163
• /
• 2016

In this paper, in order to develop optimum composition ceramics with excellent piezoelectric properties, $(Na_{0.525}K_{0.443}Li_{0.037})(Nb_{0.823}Sb_{0.08}Ta_{0.037})O_3+0.3wt%Bi_2O_3+0.4wt%Fe_2O_3$ lead-free piezoelectric ceramics were synthesized by conventional soild-state method. The calcination temperature of columbite precursors were fabricated at temperature range from $950^{\circ}C$ to $1,150^{\circ}C$ and sintering aids with low melting point were added to densify these ceramics. Effect of calcination temperature on dielectric and piezoelectric properties of ceramics were investigated. the ceramics with B-site columbite precursors at temperature of $1,100^{\circ}C$ obtained the optimal values of $d_{33}=272$ [pC/N], $k_p=0.51$, $Q_m=102$, ${\varepsilon}_r=978$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.597-607
• /
• 2014

This paper proposes active power control and frequency support control schemes of wind turbine generation system by using modified Maximum Power Point Tracking(MPPT) of Permanent Magnet Synchronous Generator(PMSG). Most wind turbine generation system is completely decoupled from the power system and power output control with pitch control. According to the frequency deviation, however, MPPT control can not contribute to the frequency change of the power system due to its active power output control. For solving this, the de-loaded(DL) control scheme is constructed for the frequency support control, which is based on applying the active power output control in the rotor speed control of PMSG. The rotor speed by used in the proposed DL control scheme is increased more than the optimal rotor speed of MPPT, and then this speed improvement increases the saved kinetic energy(KE). In order to show the effectiveness of the proposed control scheme, the case studies have been performed using the PSCAD/EMTDC. The results show that the proposed active power output control scheme(DL control and KE discharge control) works properly and the frequency response ability of the power system can be also improved with the frequency support of wind farm.