This study attempted to evaluate the process of self-forming dynamic membrane formation on mesh filter in membrane bioreactor with a two-stage method of batch (agitation) and continues (aeration) stage at different sludge concentrations. Four concentrations of activated sludge including $6{\pm}0.4$, $8{\pm}0.5$, $10{\pm}0.3$, $14{\pm}0.3g/L$ were used to demonstrate the optimal concentration of sludge for treating municipal wastewater and reducing fouling in dynamic membrane bioreactor. The formation time and effluent turbidity were decreased in the batch stage when increasing the activated sludge concentration. The minimum values of formation time and effluent turbidity were 14 min and 43 NTU for the optimum mixed liqueur suspended solids of $8{\pm}0.5g/L$, respectively. To improve operational condition and fouling reduction in the aeration stage, critical fluxes were measured for all concentrations by flux-step method. With increasing the sludge concentration, the relevant critical fluxes reduced. The optimum subcritical flux of $30L/m^2/h$ was applied as operating flux in the second stage. The maximum COD removal efficiency of 98% was achieved by the concentration of $8{\pm}0.5g/L$. Compressibility index of self-forming dynamic membrane and transmembrane pressure trend remained somewhat constant until the optimal concentration of $8{\pm}0.5g/L$ and thereafter they increased steeply.
Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.
회전교차로는 영국, 프랑스 등에서 70년대 이후부터 발전하여 현재 유럽을 비롯한 호주, 미국 등 세계 여러 나라에서 운영되어 관련 연구가 끊임없이 지속되고 있으며, 최근 회전교차로를 적극 도입하고 있는 우리나라에서도 이에 맞춰 적극적인 홍보 및 연구가 계속 되고 있다. 하지만 선행연구들은 회전교차로의 안전성 및 운영 효율성에 관한 연구들이 대부분을 차지하고 있고, 회전교차로 설계지침 및 관련연구에서 명확한 보행자 관련 설치기준 및 영향을 제시하지 않고 있다. 설계지침에서 제시하고 있는 최대 교통량에서 보행자에 의한 영향까지 고려한다면, 첨두시간과 같은 시점에서는 오히려 회전교차로가 비효율적으로 운영 될 수 있다. 즉, 첨두시 이외의 시간에는 회전교차로가 효율적으로 운영 되지만, 특정 시간대에는 차량 통행량 및 보행자 수에 따라 회전교차로의 운영개선을 검토해 볼 수 있다. 본 연구에서는 특정시간이나 첨두시의 교통량 및 보행자수를 가정하여 보행자수에 따른 회전교차로의 접근로별 용량변화를 살펴보고, 보행자 수가 증감함에 따른 회전교차로에서의 보행신호 적용 타당성 및 그에 따른 신호운영 방안을 제시하였다. 현장자료를 이용한 시뮬레이션 분석을 통해 회전교차로 보행신호의 설치효과 및 적용방안을 검토하였고, 보행신호를 적용한 회전교차로의 설치 시, 일반 회전교차로에 비해 지체감소 효과가 있는 것을 확인하였다.
본 연구는 실험실 조건에서 비스무스 필름 전극(Bismuth film Electrode)을 사용한 양극산화벗김분석법(Anodic Stripping Voltammetry)에서 비스무스의 첨가 농도와 적정 전해질을 선택하여 최적 조건을 산출하고 최적조건을 기반으로 현장에서 중금속 모니터링 가능 여부를 확인하고자하였다. 비스무스(Bi)와 혼합중금속(Pb, Cd, Zn) 실험을 통해 정확한 중금속의 측정을 위해서는 측정하고자 하는 중금속보다 1:1 이상의 비스무스가 첨가되어야 하는 것으로 나타났다. 전해질 테스트에서는 0.1 M acetate buffer (pH 4.5), 0.1 M chloroacetate buffer (pH 2.0), 0.1 M HCl (pH 2.0), 0.1 M $HNO_3$ (pH 2.0) 중 0.1 M acetate buffer가 비스무스 필름전극을 이용한 중금속 분석에 적용 가능한 것으로 나타났다. 현장 적용시, 중금속 표준용액 100 ppb 첨가 테스트 결과 Pb은 36~45 ppb, Cd는 84~91 ppb, Zn은 90~98 ppb가 측정되었다. 첨가한 중금속보다 낮은 농도로 중금속이 측정되는 것은 현장수 매질 효과에 의한 것으로 파악되었으며, 추후 현장수 매질과 중금속 측정의 상관관계에 대한 연구가 진행될 예정이다.
본 논문은 서울도시철도공사 유피스 내 전동차관리 고장데이타(BOM)을 통해 지속적으로 관리된 데이터를 활용하여 노후 철도차량부품의 신뢰성분석을 하고 개선방안을 제시하고자 하였다. 분석대상인 서울도시철도공사 7호선 2차분 보조전원장치(Static Inverter)는 객실 내 각종 서비스장치에 전원을 공급하여 직접적으로 승객 만족도에 영향을 주는 핵심적인 장치이다. 경영정보시스템의 장기간에 걸친 필드데이타를 바탕으로 고장의 패턴을 분석하기 위해 운용환경 스트레스 인자를 고려한 통계 신뢰성분석을 하였다. 보조전원장치(Static Inverter)의 하절기 집중고장현상과 관련하여 고장과 온도 스트레스인자와의 상관성에 대해 통계적 분석을 하였고 IGBT 인버터의 수명분석을 통하여 수리 전 후의 온도 스트레스 인자의 영향을 분석해 보았다. 그리고 전동차 부하량과 외기온도의 두 변수를 고려한 최적운행조건을 분석하여 고장다수 발생조건과의 냉각용량차이가 발생함을 확인할 수 있었고, 이러한 분석을 바탕으로 최적의 운행을 위한 냉각용량차이를 줄일 수 있는 방안을 제시하였다.
일반적으로 에너지파일의 열적 성능에 영향을 주는 중요한 인자로 지반의 열 물성, 열 교환기 형태, 운용방법, 파일 간 열 간섭 등이 고려될 수 있다. 본 연구에서는 지반의 실제 조건을 반영한 수치모델을 통해 이들 인자들이 미치는 영향을 살펴보았다. 지반의 포화 정도에 따라서 파일의 열 교환율은 최대 3배까지 차이를 보였으며, 열 저항은 최대 8.7%의 차이가 발생하였다. 또한 열 교환기 유형이 파일의 열 성능에 영향을 주며, 3U-Type이 W나 U-Type에 비해 상대적으로 높은 열 효율을 보였다. 운용방법에 있어서, 부분가동 시(8시간 가동, 16시간 휴지) 연속가동에 비해서 약 20%의 열효율을 보전할 수 있으며, 장기적인 열 축적현상을 방지하는데 유리하다. 지반의 조건에 따라 군 말뚝에 의한 열 간섭 정도가 달라지는데, 지반이 포화상태에서 건조 상태로 갈수록 군 말뚝에 의한 열 간섭효과는 감소한다. 일반적인 지반조건에서 열 교환 감소율 1%미만을 유지하는 적정 이격 거리는 U-Type에서 최대 3.2D, W-Type에서 최대 3.6D, 3U-Type에서 최대 3.7D로 산정되었다.
Kim, Hyun Soo;Jeong, Seong-Yeob;Woo, Sun-Hong;Han, Donghwa
International Journal of Naval Architecture and Ocean Engineering
/
제10권4호
/
pp.491-498
/
2018
The cost evaluation for voyage route planning in an ice-covered sea is one of the major topics among ship owners. Information of the ice properties, such as ice type, concentration of ice, ice thickness, strength of ice, and speed-power relation under ice conditions are important for determining the optimal route in ice and low operational cost perspective. To determine achievable speed at any designated pack ice condition, a model test of resistance, self-propulsion, and overload test in ice and ice-free water were carried out in a KRISO ice tank and towing tank. The available net thrust for ice and an estimation of the ice resistance under any pack ice condition were also performed by I-RES. The in-house code called 'I-RES', which is an ice resistance estimation tool that applies an empirical formula, was modified for the pack ice module in this study. Careful observations of underwater videos of the ice model test made it possible to understand the physical phenomena of underneath of the hull bottom surface and determine the coverage of buoyancy. The clearing resistance of ice can be calculated by subtracting the buoyance and open water resistance form the pre-sawn ice resistance. The model test results in pack ice were compared with the calculation results to obtain a correlation factor among the pack ice resistance, ice concentration, and ship speed. The resulting correlation factors were applied to the calculation results to determine the pack ice resistance under any pack ice condition. The pack ice resistance under the arbitrary pack ice condition could be estimated because software I-RES could control all the ice properties. The available net thrust in ice, which is the over thrust that overcomes the pack ice resistance, will change the speed of a ship according to the bollard pull test results and thruster characteristics (engine & propulsion combination). The attainable speed at a certain ice concentration of pack ice was determined using the interpolation method. This paper reports a procedure to determine the attainable speed in pack ice and the sample calculation using the Araon vessel was performed to confirm the entire process. A more detailed description of the determination of the attainable speed is described. The attainable speed in 1.0 m, 90% pack ice and 540 kPa strength was 13.3 knots.
본 연구의 목적은 도시 하수처리를 위한 막결합형 $A_2O$공정에 관해 실제적인 정보를 얻고자 하는 것이다. 공경 $0.25\;{\mu}m$의 평판형 정밀여과막을 공기가 주입되는 호기조에 침지시켜 처리수는 저압으로 여과된다. 인공폐수를 대상으로 최적의 처리수질과 장기운전의 안정성 확보를 위한 내부반송율과 MLSS 농도 등의 최적 운전인자를 산정하고자 하였다. 내부반송은 각각 호기조에서 무산조로 반송한 것을 type 1, 무산조에서 혐기조로 반송한 것을 type 2라고 규정지었다. 플럭스는 15 LMH, type 1을 2Q로 고정하고 실험하였을 때 최적의 운전 조건은 MLSS 농도는 11,000 mg/L, type 2가 IQ로 나타났다. 이때, BOD $COD_{cr}$, T-N, T-P의 제거율이 각각 $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$로 타 내부반송율보다 효과적이었다.
수돗물의 생산 및 공급과정에 소요되는 에너지에 대한 체계적인 분석 및 평가는 최근의 전력부족 사태와 온실가스 감축의 필요성에 따라 관심이 증가되고 있다. 본 연구에서는 기존의 연구에서 제시한 결과에 대한 검토를 통하여 실용적으로 적용 가능한 에너지 분석기법 및 평가기법을 제시하였다. 본 연구에서는 EPANET2의 수리해석 결과를 이용하여 에너지를 평가할 수 있는 모형을 MATLAB 플랫폼 기반 하에서 개발하였다. 제안된 기법은 상수관망의 입지, 관로의 상태, 누수정도 등에 따라 시설물이 내재적으로 가지는 에너지관리 효율과 운영 효율을 분리하여 평가할 수 있는 성능평가 지표를 제시하였다. 개발모형은 시험관망과 실제관망에 대하여 각각의 상수관망 구성요소에 대한 에너지 분석 및 평가결과를 제시함으로써 적용성 평가를 실시하였다. 본 연구의 결과는 상수관망 에너지관리의 최적화를 도모함으로써 피크시간대의 전력수요 관리 및 에너지 절감형 상수도 시스템 계획 및 운영에 활용될 수 있을 것으로 기대된다.
본 연구는 간헐적으로 공장폐수가 유입되고 있는 하수처리시설에 대하여 각 단위공정별 운전현황 조사와 수질 측정을 실시하여 운전특성을 파악하고자 하였다. 생물반응조의 운전조건은 MLSS 농도 2,000~3,000 mg/L, HRT 5.3~16.3 시간, SRT 2.8~66.6 일 범위를 나타내었고, SVI는, 최적 범위인 50~150을 상회하여, 200 이상의 측정값이 빈번히 발생하여 슬러지 침강성이 양호하지 않은 것으로 관측되었다. 주요 원인은 공장폐수의 유입에 기인한 것으로 판단되며, 이와 같이 공장폐수 유입 시 생물반응조내의 MLDO가 급격히 상승하고 질산화 효율이 빠르게 감소하며 이차침전지에서는 Pin floc.이 유출되는 현상이 발생하였다. 미생물 관측결과, 다양한 세균 플록과 섬모충류 등이 관측되었으나, Bulking 발생의 원인이 되는 사상균인 Sphaeotilus와 방선균 등도 발견되었다. 단위공정별 처리효율은 평균적으로는 대체로 양호한 처리효율을 나타내고 있었으나 간헐적인 공장폐수 유입의 영향으로 인한 생물반응조의 운전특성의 불안정성으로, 처리효율의 변동성이 크게 나타나고 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.