• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.192-194
• /
• 1996

This paper propose an optimal scaling gain tuning method of the fuzzy PI controller using Genetic Algorithm(GA). Scaling gains can reflect the control resolution and fuzziness of input/output variables. By the scaling gain method, the design of a fuzzy logic controller(FLC) can be simplified without affecting the system performance in comparison with multi-decision table method. In designing a fuzzy logic controller, the analytic approach method for the optimization is unavailable. Therefore GA is excellent optimization algorithms for scaling gain tuning. Using this optimal scaling gain tuning method, a good performance can be achieved both in transient and steady state.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.1-8
• /
• 2017

The optimal gain design method of a three-phase boost converter is proposed in this study. The control system has a two-loop configuration, in which each controller is coupled closely; thus, the optimal design is difficult to achieve using conventional gain-tuning method. The proposed method is adopted to the MATLAB SISO TOOL software and is based on the controller requirements, which are phase margin and cut-off frequency of the open-loop system. The optimal proportional -integral gains can be designed easily using the proposed interactive method of the SISO TOOL. The performance of the proposed system is verified through simulation and experiments.

• 대한한의학회지
• /
• 제39권4호
• /
• pp.16-29
• /
• 2018

Introduction: We aimed to investigate the predictive factors and optimal age for response to herbal medicine treatment for height gain in children. Methods: This retrospective chart review included 61 children (age range, 5-16 years) treated for height gain between 2011 and 2015. A predictive model was established by multiple linear regression analysis. Dependent variables were defined by the differences in percentile before and after herbal medicine treatment. The optimal cutoff value of patient age was determined by receiver operating curve analysis. Results : The age of initiation of herbal medicine therapy (p = 0.012) and administration of Forsythiae fructus (p = 0.002) were significant variables for treatment response. The adjusted R2 value was 0.231. The mean ages of the responder and non-responder groups were significantly different (p = 0.023). The optimal cutoff value of age for predicting treatment response was 9.75 years. Treatment response was better among children below 9.75 years of age. Conclusions: Patient age and administration of Forsythiae fructus were identified as determinants of response to herbal medicine treatment. Treatment of rhinitis and initiation of height gain treatment at an early age are critical for better response. These findings will provide fundamental data for further research.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.811-816
• /
• 2011

In this paper, we propose a optimal design using the Evolution Strategy of a high gain $4\times4$ array antenna that have the resonant frequency of a 19.05GHz with 18.86GHz~19.26GHz bandwidth. The proposed array antenna structure is designed to be allocated equally electric power by microstrip patch power splitter. Thus the optimal array antenna with power splitter are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The simulation result of $4\times4$ array antenna is confirmed that the Gain is 19.36 dBi at resonance frequency 19.05GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.219-224
• /
• 1988

A decentralised computational procedure is proposed for the optimal feedback gain matrix of large-scale discrete-time systems with time-delays. The constant feedback gain matrix is computed from the optimal state and input trajectries obtained hierarchically by the interaction prediction method. All the calculation in this approach are done off-line. The resulting gains are optimal for all the initial conditions. The interaction prediction method is applied to time-delay large-scale systems with general structures by extending the dimensions of coupling matices. A numerical exampie illustrates the algorithm.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.85-93
• /
• 2013

The proportional plus integral(PI) feedback control manner has been used in many general industrial fields such as refrigeration system because of its simple design process and favorable control performance. This paper deals with optimized PI controller design of the refrigeration system based on evaluation functions such as integrated absolute error(IAE). The suggested optimal PI gains can be easily calculated by a simple program and the optimal controllability satisfying the evaluation function can be assured. Furthermore, at the initial step of controller design, the suggested optimal gain is able to reflect some noise disturbances caused by an inverter which drives variable speed compressors. The validity of the suggested optimal gain is investigated by some simulations and experiments to verify its efficiency. From the results of comparing control performance between the optimal PI controller based on the evaluation function and the PI controller designed by the Matlab tuner which was known as the most popular gain tuner, the optimal PI controller showed more desirable control performance especially in transient responses.

• 산업공학
• /
• 제17권1호
• /
• pp.113-120
• /
• 2004

The increased use of computers has introduced a variety kind of human-computer interfaces. Mouse is one of the useful interface tools to place the cursor on the desired position on the monitor. This paper suggested a foot controlled isotonic mouse which was similar to the ordinary hand-controlled mouse except that positioning was controlled by the right foot and the clicking was performed by the left foot. Experimental results showed that both the index of difficulty(IOD) and the display-control gain(DC gain) varied the total movement time in a target acquisition task on the monitor. The present authors also drew the optimal display-control gain of the foot-controlled isotonic mouse over the index of difficulty of 1.0 to 3.0. The optimal display-control gain, i. e., 0.256, could be used when designing a foot-controlled isotonic mouse.

• 한국통신학회논문지
• /
• 제29권10C호
• /
• pp.1370-1377
• /
• 2004

시간 지연이 있는 시스템에서의 최적 제어 이득은 시간 지연이 없는 시스템에서 설계된 최적 제어 이득과 지연 시간에 대하여 계산된 상태천이 함수의 곱의 형태로 나타난다. 따라서 시간 지연이 없는 시스템에 대하여 PID제어기의 영점들을 플랜트의 최대 극점에 근접하도록 가중치 요소 Q와 R을 선택하여 최적 제어 이득을 구하고, 시간 지연이 있는 2차 시스템에서의 상태천이 함수를 계산하여 시간 지연이 있는 시스템에서의 강인한 최적 PID 제어기 설계가 가능하도록 하였다.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.41-47
• /
• 2023

This paper presents the development of a controller that can control the temperature of an heating system based on a thermoelectric module. Temperature controller using Peltier has various external factors such as external temperature, characteristics of an aluminum plate, installation location of temperature sensors, and combination method between the aluminum plate and heating element. Therefore, it is difficult to apply the simulation and simulation results of heating system using Peltier at control algorithm. In general, almost temperature controller is using PID algorithm that finds control gain value heuristically. In this paper, it is proposed mathematical model that explain correlate between the temperature of the heating system and input voltage. And then, optimal parameter of estimated thermal model of the aluminum plate are searched by using genetic algorithm. In addition, based on this estimated model, the optimal PID control gain are inferred using a genetic algorithm. All of the sequence are simulated and verified with proposed real system.

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.80-93
• /
• 1997

This paper proposes a new technique of optimal codebook design in multistage gain-shape vector quantization (MS-GS VQ) for wireless image communication. An original image is divided into a smany blocks as possible in order to get strong robustness to channel transmission errors: the original image is decomposed into a number of subband images, each of which contains a sperate spatial frequency information and is obtained by the biorthogonal wavlet transform; each subband is separated into several consecutive VQ stages, where each stage has a residual information of the previous stage; one vector in each stage is divided into two components-gain and shape. But, this decomposition genrates too many blocks and it thus makes the determination of optimal codebooks difficult. We overcome this difficulty by evolving each block's codebook independently with different genetic algorithm that uses each stage's individual training vectors. Th eimpact of th eproposed VQ technique on the channel transmission errors is compared with that of other VQ techniques. Simulation results show that the proposed VQ technique (MS-GS VQ) with the optimal codebook designe dy genetic algorithms is very robust to channel transmission errors even under the bursty and high BER conditions.