• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.75-93
• /
• 2006

The ship selection by consignors has two steps to carry their cargo. The first step is to select according to time schedule of ships and amount of cargo, and the second one is re-selection by concentrating different consignors' cargo into a unit that can be carried by single ship. Up to now, these steps are usually done by hands leading to inefficiency. The purpose of our paper is to form a logistics chain to minimize the overall sum of logistics cost by selecting ships for consignors' cargo using negotiation methodology between agents. Through concentration and distribution of cargo, maximization of global profit derived from searching optimal point in trade-off between inventory cost and freight rate cost. It is settled by the negotiation between consignors. In the experiments, two methods of the first-step of ship selection: EPDS(Earliest Possible Departure-Date Scheduling) and LPDS(Latest Possible Departure-Date Scheduling) coupled with the second-step ship concentration method using the negotiation were shown. From this, we deduced inventory cost, freight rates and logistics cost according SBF(Scheduling Bundle Factor) and analyzed the result. We found it will minimize the total logistics cost if we use negotiation method with EPDS.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.65-69
• /
• 2005

A construction project of Incheon 2nd bridge, which is connected between the Incheon Song-Do New Town and the Incheon International Airport in Young-Jong-Do, has been proposed by the private capital in 1999. But the optimal width of the main span has not been decided in spite of the three investigations into the feasibility of ship's safe transit in this planned bridge. In this paper, we study the economic analysis on port operational efficiency according to traffic schemes, one-way or two-way of vessels over 10,000G/T, in the main span of this bridge. In this comparative result, total queueing time due to the one-way in the bridge main span is evaluated 20,362 hours in 2011 and 24,544 hours in 2020. Therefore the demurrage cost and the accumulation cost of freight are evaluated 19.7 billion won in 2011, and 23.3 billion won in 2020, then total accumulated costs during 33 years from 2008 until 2040 are evaluated about 768.9 billion won.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.158-166
• /
• 2007

After constructing the high-speed railroad, KORAIL acquired advanced maintenance techniques about Rolling-stocks. Also RCM theory is applied to maintenance field like as inspection period and method. In the meantime, the development of the maintenance methode for Rolling-stock is slow when it compares to the components and system technology. For this reason KORAIL tries to build the optimal maintenance system which can lead the Rolling-stock maintenance technique. The existing vehicle except High Speed train KTX are separated to electric motor car, electric locomotive, diesel locomotive, diesel car, passenger car and freight car. The inspection period and methode for existing vehicles which mentioned above will be examined and the optimal Rolling-stock maintenance technique will be applied.

• Journal of Power System Engineering
• /
• v.7 no.1
• /
• pp.51-59
• /
• 2003

The recent amount of container freight continuously has been increased, but the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. It is required that the working velocity and safety are improved by control of moving the trolley as quick as possible without large overshoot and any residual swing motion of container at the destination. In this paper, a LQ Fuzzy controller for a container crane is proposed to accomplish an optimal design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally, the effectiveness of the proposed controller is verified through computer simulation.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.13-21
• /
• 1998

This is a study on the natural vibration characteristics of Vehicle frame. Nowadays, many trucks freight the over-load, do the car designers consider the over-load about 200% in the design. It's necessary to make the model of a vehicle and simulate it for the test of driving condition, durability and vibration behavior before the vehicle is manufactured. If it is possible to make a simulation using the static and dynamic analysis, this is very useful in accomplishing an optimal design of the vehicle. In this paper, we studied the vibration characteristics of a truck body frame. The automobile body frame model for experiment is made smaller than real size frame with the ratio of 1/10. The vibration characteristics of a frame is considered as one of main factors in analyzing and improving the problem for ride comfort, noise and vibration reduction. Therefore, we experimented two method to neglect the nonlinearity. First is bolting and second is welding at the joint section. We compared computer simulation results and experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.5
• /
• pp.544-553
• /
• 2002

The recent amount of container freight continuously has been increased, but the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. It is required that the working velocity and safety are improved by control of moving the trolley as quick as possible without large overshoot and any residual swing motion of container at the destination. In this paper, a LQ controller for a container crane is proposed to accomplish an optimal design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally, the effectiveness of the proposed controller is verified through computer simulation.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.971-976
• /
• 2004

The management of railroad structures is more difficult and complicate because there are many structures such as rail, bridge, tunnel, station, and so on. Therefore, LCC(Life Cycle Cost) analysis of railroad structures as public infrastructure must contain a maintenance cost as well as an initial cost in order to make a more effective management during the life cycle on the design phase. This paper presents a cost classification scheme considering user costs such as value of delayed time of passenger and freight. Also, in this study it is developed a probabilistic life cycle cost(PLCC) analysis model of railroad structures taking into account uncertainties and variations of input variables in order to analyze LCC. It may be stated that the model proposed in this study can greatly contribute to the making optimal decision, the estimate of the maintenance cost and the allocate of budget in the project of railroad structures.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2461-2463
• /
• 1998

The container crane is more expensive than other cranes, and is designed for efficient use. Since there are more control variables than other crane has more fault factors. Therefore it is important to reduce these factors efficiently and also to increase the capacity to move more freight in due time. To solve the above problems the velocity relation of the motor will be examined. In this paper the velocity relation of the motor will be expressed in a mathematical equations for efficient control.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.212-221
• /
• 2022

Currently, issues related to freight at Vietnamese logistics companies are becoming more and more urgent because of typical problems in Vietnam such as traffic, infrastructure, and application of information technology. This problem has been studied by applying many different approaches such as Integer Programming (LP), Mixed Integer Programming (MIP), hybrid, meta search, … In this paper, we applied the ILP model in order to deal with the VRP problem in a small size logistics company which is very popular in Vietnam. The experiments showed promising results with some optimal solutions with some small extra costs.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.633-639
• /
• 2007

This study proposes an optimal condition to recognize a train using RFID. In order to recognize a moving train, bandwidth, an angle of antenna and the location of a tag should be considered. In this study, a field test was conducted using two different bandwidths (900MHz and 2.45GHz), four angles of antenna(0, 30, 45, and $60^{\circ}$), different velocities (10, 30 and 50km), and three different locations of tags. The field test verified the optimal condition for recognition of a train, The present study convinced that location detection and tracking of rail freight can be monitored in real time. The present technology can be applied to railway signals including detecting and tracking such as EURO Balis.