• Animal Bioscience
• /
• 제35권7호
• /
• pp.1039-1047
• /
• 2022

Objective: The purpose of this study is to determine the optimal time of transportation of floor-feed and scatter-feed broilers. Methods: Eighty healthy Arbor Acres (AA) broilers (21-day-old, 624.4 g, male, standard error = 6.65) were selected and randomly divided into two experimental groups (floor-feed and scatter-feed), then fed for three weeks. The experiment comprised a 2×4 factorial design with 2 feed patterns (floor-feed and scatter-feed) and 4 transport periods (2, 3, 4, and 5 h), and 4 replicates of 5 broilers (54-day-old, 2243 g, standard error = 46.65) was used to compare weight loss, meat quality and behavior index of different groups. Results: It appeared that drip loss, meat color and resting behavior of experimental broilers changed as length of transportation (p<0.05), however, weight loss and pH were not significantly transformed (p>0.05). Compared with floor-feed group, broilers in scatter-feed group had lower pH at 24 hours (3 h) and different behavioral indicators (p<0.05). Especially indicators after 3 h transportation, there were obvious differences between the two feeding modes in the behavior reaction of stress events before slaughter with different transport duration (p<0.05). The fluctuation of data on resting behavior with scatter-feed was significantly higher than that of floor-feed broilers. There was no interaction between transport time and different feeding methods for index tested of our experiment (p>0.05). Conclusion: Comprehensive analysis showed that the maximum transport duration of floor-feed and scatter-feed broilers should not exceed 3 h, and scatter-feed broilers were more likely prone to fear.

• 소성∙가공
• /
• 제14권2호
• /
• pp.112-120
• /
• 2005

In the die casting process, the flow of liquid metal has significant influence on the quality of casting products and die life. For the optimal process design of gear housing of automobile transmission, various analyses were performed in this study by using computer simulation code, MAGMAsoft. The simulation has been focused on the molten metal behaviors during the mold filling and solidification stages for the sound casting products. Also internal defects were predicted by application of air pressure and feeding criteria.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2003년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.199-200
• /
• 2003

After more than 5 years of turbot culture in China, low percent survival and high occurrences of abnormally pigmented juveniles are still major problems for fish farmer. Much research has been directed toward determining the optimal feeding strategies and nutritional requirements for marine flatfish larvae, and considerable advances have been made. The most common live feeds include :Artemia, rotifer and copepods. (omitted)

• Journal of Animal Science and Technology
• /
• 제46권6호
• /
• pp.989-998
• /
• 2004

Holstein 거세우 48두를 대상으로 육성기 농후사료 급여수준 및 출하월령에 따른 산육능력 및 도체특성 구명을 위해 6개 처리(T1 : 자유채식 19개월령 출하, T2 : 제한급여 19개월령 출하, T3 : 자유채식 22개월령 출하, T4 : 제한급여 22개월령 출하, T5 : 자유채식 25개월령 출하, T6 : 제한급여 25개월령 출하)를 두어 4개월령부터 25개월령까지 사양시험 후 도체조사를 실시한 결과, 육성기 농후사료 자유채식 및 제한급여에 따른 출하월령별 체중 및 전기간의 일당증체량은 19, 22 및 25개월령에 각각 657.7${\sim}$731.3kg과 1.090${\sim}$1.245kg, 749.0${\sim}$776.5kg과 1.079${\sim}$1.130kg, 그리고 772.4${\sim}$811.9kg과 0.975${\sim}$1.030kg으로, 출하체중은 자유채식보다 제한급여가 그리고 출하월령이 높을수록 높았고, 일당증체량도 자유채식보다 제한급여가 그리고 출하월령이 낮을수록 높았으며, 제한급여가 자유채식보다 약 8.3% 증가하였고 출하월령이 경과됨에 따라 월평균 2.0%씩 감소하였다. 1kg 증체에 소요된 TDN은 평균 6.765kg 이었고, 제한급여가 자유채식보다 8.4% 적게 소요되었고, 출하시기가 1개월 늦어짐에 따라 소요량이 약 4%가 증가되었다. 도체조사 결과, 등지방두께 및 등심단면적은 4.6${\sim}$8.5mm(평균 6.7mm) 및 73.8${\sim}$81.8cm2(평균 77.1cm2)로 자유채식보다 제한급여가 그리고 출하시기가 늦어질수록 두껍거나 넓어졌고, 근내지방도는 1.17${\sim}$3.67(평균 2.46)로 자유채식보다 제한급여가 그리고 출하시기가 늦어질수록 높았다. 경제성 분석결과 총 소득은 537.2${\sim}$1,071.8천원/두으로 자유채식보다 제한급여가 그리고 출하월령이 늦어질수록 높았지만, 월평균 소득은 26.4${\sim}$52.9천원/두으로 T4>T6>T2의 순으로 높았다. 이상과 같은 결과들을 종합해 볼 때, Holstein 거세우 비육시 조사료원이 볏짚일 경우, 육성기에는 농후사료를 체중의 1.9% 수준으로 그리고 비육기에는 자유채식의 형태로 하되, 22${\sim}$25개월령 사이에 출하하는 것이 바람직 할 것으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제5권3호
• /
• pp.177-180
• /
• 1995

In horseradish peroxidase-catalyzing polymerization of phenol under the water/dioxane solvent system, the optimal concentration of hydrogen peroxide was found to be 10 mmol/I. Feeding of hydrogen peroxide at its optimal concentration improved the polymerization performance by reducing reaction time and increasing molecular weights. Monomer conversions and the molecular weights of the enzymatically produced polymer were in the ranges of 83.1~94.2$%$ and 58000~68000, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1251-1253
• /
• 2001

This paper presents on capacity design of DC-fed-traction system. The system is introduced including a characteristics of train, feeding network configuration, and design method of substation arrangements. Optimal design procedures is described, and program for capacity computation of the system is presented using the nodal equation, K.C.L, K.V.L, Ohm's law and superposition theory. For the proof of the proposed algorithm, we accomplished the simulation of DC traction system for HA-Nam LRT. By considering whole component in DC traction system the conclusion will be much precise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.130-132
• /
• 1997

In this paper, we propose a new type of tubular linear induction motor(TLIM) with two-dimensional motion. The proposed motor consists of four short primary LIMs arranged on a same circumference and a common secondary. By adopting independently energized ring-windings to the primary, we can expect the reduction of coil-end region and the freedom of alternating current supply. The secondary conductor is capable of producing anyone of rotary, linear, and helical motions by controlling the phase of supply currents in each primary winding. From the 3-D finite element analysis and the experiment, we derive the feeding conditions to increase the subsidiary rotary-force and an optimal arrangement of primary currents to reduce the number of slot.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권12호
• /
• pp.1881-1889
• /
• 2018

Objective: In dryland areas of China, alfalfa hay (AH) is a possible substitute for concentrate feed for beef cattle. To evaluate the potential benefits of this substitution, we studied the effect of the ratio of AH intake to total dry matter (DM) intake on average daily body-weight gain (ADG), dietary energy utilization status, and economic benefit in Gansu province. Methods: In each of two feeding trials in 2016 (trial 1 [T1], July 3 to 17; trial 2 [T2], August 15 to September 23), crossbred male Simmental calves were allocated to low AH (LA), medium AH (MA), and high AH (HA) feeding groups (n = 4 per group). The target ADG was set as 1 kg for both trials. In a one-way-layout design based on conventional feeding practices in the province, calves received diets containing the different AH amounts, with a constant ratio of corn stover:total DM and decreasing rations of concentrate feed proportional to the increase in AH. Calves in T1 received AH at 15% (T1-LA), 23% (T1-MA), or 31% (T1-HA) of their dietary DM allowances; those in T2 received 9% (T2-LA), 24% (T2-MA), or 34% (T2-HA) AH. Results: Among the T1 groups, both ADG and economic benefit were highest in T1-LA; whereas in T2, they were higher in the T2-LA and T2-MA groups than in T2-HA. Energy digestibility did not significantly differ among the groups in either trial. The dietary AH inclusion ratios of 14% in the warm season and 8% to 21% in the cool season appeared to yield optimal ADG, metabolizable energy intake, and economic benefit. Conclusion: Low-level inclusion of AH, ranging from 8% to 21%, is a practical approach for beef cattle feeding. This modified feeding regimen likely will promote increased growth performance during the fattening stage of beef steers in dryland areas of Gansu province, China.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1327-1338
• /
• 2013

The humanized anti-hepatocyte growth factor (HGF) monoclonal antibody (mAb) YYB-101 is a promising therapeutic candidate for treating various cancers. In this study, we developed a bioprocess for large-scale production of YYB-101 and evaluated its therapeutic potential for tumor treatment using a xenograft mouse model. By screening diverse chemically defined basal media formulations and by assessing the effects of various feed supplements and feeding schedules on cell growth and antibody production, we established an optimal medium and feeding method to produce 757 mg/l of YYB-101 in flask cultures, representing a 7.5-fold increase in titer compared with that obtained under non-optimized conditions. The optimal dissolved oxygen concentration for antibody production was 70% $pO_2$. A pH shift from 7.2 to 7.0, rather than controlled pH of either 7.0 or 7.2, resulted in productivity improvement in 5 L and 200 L bioreactors, yielding 737 and 830 mg/ml of YYB-101, respectively. The YYB-101 mAb highly purified by affinity chromatography using a Protein A column and two-step ion exchange chromatography effectively neutralized HGF in a cell-based assay and showed potent tumor suppression activity in a mouse xenograft model established with human glioblastoma cells.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.