• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.2
• /
• pp.107-118
• /
• 1978

The paper illustrates a possible application of control theory to an economic growth system. Simultaneous nonlinear system of differential equations has been modeled which is different from the traditional formulation, based on the theory of economic growth for a two-sector (dual) economy. Necessary and sufficient conditions for the existence of the optimal control are derived directly from the Hamiltonian, and the optimal controls are also obtained by solving simultaneous equations. Obtaining the trajectories of the optimal control and state variables, however, should rely on the numerical procedures. Empirical application has been conducted for the case of the Korean economy as an illustration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.219-224
• /
• 1988

A decentralised computational procedure is proposed for the optimal feedback gain matrix of large-scale discrete-time systems with time-delays. The constant feedback gain matrix is computed from the optimal state and input trajectries obtained hierarchically by the interaction prediction method. All the calculation in this approach are done off-line. The resulting gains are optimal for all the initial conditions. The interaction prediction method is applied to time-delay large-scale systems with general structures by extending the dimensions of coupling matices. A numerical exampie illustrates the algorithm.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.313-321
• /
• 2004

In this paper we study the problem of three-dimensional layout optimization on the simplified rotating vessel of satellite. The layout optimization model with behavioral constraints is established and some effective and convenient conditions of performance optimization are presented. Moreover, we prove that the performance objective function is locally Lipschitz continuous and the results on the relations between the local optimal solution and the global optimal solution are derived.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2006

The purpose of this paper is to identify optimal designs of server port connections between two server system for 200-300 user group. Given 3 empirical models as user and port parallel server types under some conditions of 100 Mbps and optimal CPU temperature suggested by Lee and Kim(2005), our results are shown; port parallel model was optimal when traffic processing times measured, and 250 traffics was jumping point as a critical point in our cases.

• Nonlinear Functional Analysis and Applications
• /
• v.28 no.3
• /
• pp.659-670
• /
• 2023

In this paper, we study the distributed optimal control problem of a coupled system of the host-pathogen model. The system consists of the density of the susceptible host, the density of the infected host, and the density of pathogen particles. Our main goal is to minimize the infected density and also to decrease the cost of the drugs administered. First, we prove the existence and uniqueness of solutions for the proposed problem. Then, the existence of the optimal control is established and necessary optimality conditions are also derived.

• Journal of the Korea Institute of Building Construction
• /
• v.1 no.2
• /
• pp.174-178
• /
• 2001

This study was performed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a result, the optimal mixing conditions were : W/B 41%, unit binder 375kgf/$\textrm{m}^3$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$\textrm{cm}^2$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.533-538
• /
• 2001

This study was peformed to control the thermal crack of the mat footing slab in the multi-purposed buildings. In this study, we executed the mixing design of concrete to satisfy the workability and the quality according to the site conditions. And, we evaluated quantitatively about the possibility of thermal crack by using hydration heat analysis system. Finally, we proposed the optimal mixing conditions, curing methods and curing period which all factors are considered. As a results, the optimal mixing conditions were : W/B 41%, unit binder 375kg/$cm^{2}$, FA replacement ratio 20%. Lowest thermal stress was 22.0kgf/$cm^{2}$ and at that time thermal crack index was over 1.5, when the coefficient of thermal conductivity was lowest among the curing conditions. And, the total curing time was estimated at 6.7 days according to curing steps.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.451-457
• /
• 1995

Most important study on development of high-Tc superconducting magnet is magnetic properties with design conditions To study optimal design condition of high-Tc superconducting magnet, small size solenoid magnet was designed and simulated. Design conditions are radius of bobbin, radius of magnet, length of magnet, critical cur-rent and notch size. We know that intensity of magnetic fields was controled by critical current and uniformity of magnetic fields was controled by notch size. The optimal design conditions to get the high intensity and uniformity of magnetic field in this experiments were radius of bobbin=3[cm], radius of magnetic=12[cm], length of Z=10[cm], notch size=6[cm] and critical current=12[A].

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.53-57
• /
• 2001

A short shot is an incomplete molded part caused by insufficient material injection into the mold. Remedial actions to control the process conditions can be taken by injection molding experts based on their knowledge and experiences. However, it is very difficult for non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of optimal process conditions based upon fully logic algorithm is proposed so that trial and error can be minimized and non-experts an well at experts can also find the optimal process conditions.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.364-368
• /
• 2002

Optimal synthetic conditions of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by Box and Wilson. Barium chloride and Sodium sulfate were utilized as reactants in order to prepare barium sulfate in this study. The optimum Synthesis conditions of barium sulfate obtained from this study are as follows; Reactant temperature; 60~75$^{\circ}C$ (viewpoint of yield) and 60~71$^{\circ}C$ (viewpoint of bulkiness). Concentration of two reactants; 12.7~14.4％ (viewpoint of yield) and 5~10.5％ (viewpoint of bulkiness). Mole ratio of two reactants, [BaCl$_2$]/[Na$_2$SO$_4$]; 1.62~1.96 (viewpoint of yield) and 2.0 (viewpoint of bulkiness). Reacting time; 13~15 minutes (viewpoint of yield) and 12~14 minutes (viewpoint of bulkiness). Drying temperature of product; 86~10$0^{\circ}C$ (viewpoint of yield) and 6$0^{\circ}C$ (viewpoint of bulkiness).