• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.58-63
• /
• 2011

Recently, superconductor flywheel energy storage systems (SFESs) have been developed for application to a regenerative power of train, a power quality improvement, the storage of distributed power sources such as solar and wind power, and a load leveling. As the high temperature superconductor (HTS) bearings offer dynamic stability without the use of active control, accurate analysis of the HTS bearing is very important for application to SFESs. Mechanical property of a HTS bearing is the main index for evaluating the capacity of an HTS bearing and is determined by the interaction between the HTS bulks and the permanent magnet (PM) rotor. HTS bearing rotor consists of PM and iron collector and the proper dimension design of them is very important to determine a supporting characteristics. In this study, we have optimized a rotor magnet array, which depends on the limited bulk size and performed various dimension layouts for thickness of the pole pitch and iron collector. HTS bearing rotor was installed into a single axis universal test machine for a stiffness test. A hydraulic pump was used to control the amplitude and frequency of the rotor vibration. As a result, the stiffness result showed a large difference more than 30 % according to the thickness of permanent magnet and iron collector. This is closely related to the bulk stiffness controlled by flux pining area, which is limited by the total bulk dimension. Finally, the optimized HTS bearing rotor was installed into a flywheel system for a dynamic stability test. We discussed the dynamic properties of the superconductor bearing rotor and these results can be used for the optimal design of HTS bearings of the 10kWh SFESs.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.93-106
• /
• 2006

A Grid Database is a database management system to process effectively and use the distributed data in a grid computing environment. Spatial data is more important than other general data according to the local characteristics and requires a large storage. The grid database can be used as the optimal system for the management of the spatial data. However, contrary to the conventional distributed database systems, the Grid Database which guarantees the local autonomy has a possibility not to provide an effective system, or it is impossible to use a centralized management environment. In order to allow flexible responses to a dynamically changing environment, it is required to use effectively reorganized method. In this paper, hierarchical reorganization method is presented for dynamic reorganization in a grid database. When the reorganization is conducted, an organizer is created to collect the information of databases. In addition, the organizer which is constructed by the hierarchical structure supports information communication and reorganization, and then it allows the support of regional reorganization operation and effective balance control. The performance assessment of the proposed method shows that the processing capacity is increased after the reorganization.

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.326-331
• /
• 2006

In the present study, we examined biosorption characteristics of heavy metals onto the extracellular polysaccharide (EPS) produced by the purple nonsulfur photosynthetic bacteria Rhodopseudomonas sp. KH4, which was isolated from a stream in Anyang, Kyonggi-Do. When Cd (100 mg/L) and Cu (100 mg/L) were added to EPS (1.0 g/L) in the optimal condition (Cd; pH 8, Cu; pH 5, $40^{\circ}C$), 84.2 mg/L of Cd and 70.0 mg/L of Cu were adsorbed within 30 min and 10 min, respectively. When 100 mg/L of Cd and Cu were present as mixture, 16.8 mg/L of Cd and 48.7 mg/L of Cu were adsorbed at $25^{\circ}C$, pH 5. The maximum adsorption capacity determined by fitting Langmuir isotherms model was suitable for describing the biosorption of Cd (76.9 mg/g) and Cu (67.1 mg/g) by EPS. The neutral monosaccharide in the EPS determined by GC consisted of arabinose (2.4%), glucose (7.1%) and mannose (90.5%).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.175-182
• /
• 2009

The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2015

Recently, BIM proliferates at high speeds so that BIM planning is trying to be used in various kinds of engineering. However, when using different software during design phase and construction phase, the problem of mutual compatibility is coming out. Even the BIM technology has been used or the practical applicability has been made into result, it would be fair to say that BIM has limitations in the visual level. In this research, it is meaningless to obtain the BIM result as the primary purpose. As the usefulness of it is judged incomplete, we committed to master the trend and problems of terrain spatial information systems and BIM. Furthermore, the plan of building the BIM in the civil field, especially the civil-BIM based on the technology ofterrain spatial information has been presented. It can be judged through this research that the high-capacity DB of BIM occurred during the whole process may cause poor performance of the following stage the structure system which connects the terrain spatial information and civil-BIM. In order to manage the optimal full cycle, the spatial analysis technology of the stages after choosing the DB has been described.

• Journal of Animal Science and Technology
• /
• v.62 no.1
• /
• pp.43-51
• /
• 2020

This experiment was conducted to investigate the effects of exogenous emulsifier supplementation on growth performance, energy digestibility, and meat quality in broilers. A total of 60 Ross 308 broilers were treated for two weeks. The three dietary treatments were: (CON) basal diet; (T1) basal diet + 0.1% exogenous emulsifier, and (T2) basal diet + 0.2% exogenous emulsifier. In Period 1 (0-7 days), broilers in the T2 group showed significantly higher body weight gain (BWG) (p < 0.05) and broilers in the T1 and T2 treatment groups had significantly lower feed conversion ratios (FCR) (p < 0.05). In Period 2 (8-14 days), broilers in the T2 treatment group had significantly higher feed intake (FI) (p < 0.05). Therefore, in this experiment (from days 0 to 19), BWG and FCR were affected (p < 0.05) by the T1 and T2 treatments. Additionally, the T1 and T2 treatments with added exogenous emulsifier in the broiler feed showed significantly higher energy digestibility (p < 0.05) than the CON treatment. Broilers fed the T2 diet had higher water-holding capacity (WHC) (p < 0.05) and cooking loss than the broilers fed the CON and T1 diets. Moreover, the shearing force in the meat was decreased (p < 0.05) in broilers fed the T2 diet. In conclusion, supplementation with exogenous emulsifier to broiler diets improved growth performance, energy digestibility, and meat quality. The optimal amount of exogenous emulsifier supplementation requires further investigation.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.321-327
• /
• 2015

The optimal condition for preparation of powdered calcium acetate (LCCA) which has high solubility, from calcined powder (LCCP) of the littleneck clam shell by response surface methodology (RSM) was examined. Increased molar ratio of LCCP led to reduced solubility, yield, color values, and overall quality. The critical values of multiple response optimization of independent variables were 2.57 M of acetic acid and 1.57 M of LCCP. The actual values (pH 7.0, 96.1% for solubility, and 220.9% for yield) under the optimized condition were similar to the predicted values. LCCA showed strong buffering capacity between pH 4.89 and 4.92 on addition of ~2 mL of 1 N HCl. The calcium content and solubility of LCCA were 21.9-23.0 g/100 g and 96.1-100.1%, respectively. The FT-IR and XRD patterns of LCCA were identified as calcium acetate monohydrate, and FESEM images revealed an irregular and rod-like microstructure.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.5
• /
• pp.177-188
• /
• 2018

The scale of graph data has been increased rapidly because of the growth of mobile Internet applications and the proliferation of social network services. This brings upon the imminent necessity of efficient distributed and parallel graph processing approach since the size of these large-scale graphs are easily over a capacity of a single machine. Currently, there are two popular parallel graph processing approaches, vertex-centric graph processing and block centric processing. While a vertex-centric graph processing approach can easily be applied to the parallel processing system, a block-centric graph processing approach is proposed to compensate the drawbacks of the vertex-centric approach. In these systems, the initial quality of graph partition affects to the overall performance significantly. However, it is a very difficult problem to divide the graph into optimal states at the initial phase. Thus, several dynamic load balancing techniques have been studied that suggest the progressive partitioning during the graph processing time. In this paper, we present a load balancing algorithms for the block-centric graph processing approach where most of dynamic load balancing techniques are focused on vertex-centric systems. Our proposed algorithm focus on an improvement of the graph partition quality by dynamically reassigning blocks in runtime, and suggests block split strategy for escaping local optimum solution.

• The Korean Journal of Mycology
• /
• v.45 no.2
• /
• pp.121-131
• /
• 2017

We evaluated the antioxidant properties of Lentinula edodes upon sawdust bag cultivation with 5 oak substrates: Quercus acutissima, Q. mongolica, Q. serrata, Q. aliena, and Q. variabilis. We found that the optimal extraction conditions were 70% (v/v) methanol shaken at 150 rpm at $25^{\circ}C$ and 150 rpm for 24 h. The methanolic extracts from L. edodes contained high phenolic and flavonoid contents, they also exhibited stronger antioxidant activities. The total phenolic contents and total flavonoid contents of the mushroom extracts ranged from 2.37 to 3.12 milligrams of gallic acid equivalents per gram of dried mushroom (mg GAE/g) and 0.48 to 0.48 milligrams of quercetin equivalents per gram of dried mushroom (mg QE/g), respectively. In addition, the mushroom extracts exhibited 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (15.8% to 89.4%) at 2 to 10 mg/mL, ferric reducing antioxidant power (0.153 to 0.425) at 5 to 20 mg/mL, and reducing power (0.078 to 0.359) at 5 to 20 mg/mL, respectively. Q. aliena more effectively increased total phenolic contents, total flavonoid contents, and antioxidant activities than the other oak substrates.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.862-869
• /
• 2010

Numerical analysis was done to evaluate the gas flow distribution in small scale SCR system which has $2.4{\times}2.4{\times}3.1\;m^3$ in volume and 25,300 Sm3/hr in flue gas flow capacity. Various types of baffles proposed for controlling the flow uniformity were evaluated by the CFD analysis to find the optimal geometry of the baffle in the SCR system. By installing baffles in the SCR system, the RMS (%) value was raised up to 6.2% compared with the baffle-uninstalled state. The effect of baffle thicknesses on the RMS (%) value was not shown within 0 and 8 mm in thickness, but the RMS (%) value was raised by 2.5% in 10 mm of baffles thickness, which causes the unstability in flow. By comparison between the shape of baffles, it is known that the lattice type baffle has better performance in controlling the flow uniformity than the circular truncated cone type baffle or mixer type baffle. RMS (%) values have more that 10% difference according to the shape of baffle type.