• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2013

We try to find the generalized structural equation that gives a perspective understanding for telecentric lenses through paraxial optical algebraic equations and preconditions from a highly experienced design sense. The equation is named the $f{\theta}$ formula and this formula is applied to single lenses, double Gauss lenses, Cooke triplet lenses and the compound lens composed of a Cooke triplet lens and a double Gauss lens step by step. And this formula is also applied to single fly-eye lenses plus a telecentric lens and double fly-eye lenses plus a telecentric lens in sequence. As a result, we can confirm that this $f{\theta}$ formula leads to intuitive optical design with a structural understanding for telecentric lens systems.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.165-174
• /
• 2006

The autotstigmatic null lens system is designed and constructed for the fabrication of a parabolic mirror with the diameter of 450 mm(f/2.7). And the measurement reliability is also analyzed theoretically by means of the tolerancing technique using lens design software(CODE V). From this analysis, we can precisely fabricate a parabolic mirror with the large diameter of 450 mm(f/2.7). Meanwhile, in order to confirm the fabrication results by the autostigmatic method, the mirror surface is tested again by an autocollimating method that uses only a plane mirror without any null lens.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.164-169
• /
• 2024

We applied recursive numerical computation to create a basic design of a camera optical module for mobile phones. To enhance the resolution performance for a 38-degree field of view, we constructed the optical system with six non-spherical lenses. However, to increase its applicability to a compact mobile phone, we limited the overall length to 5 mm in the design. Using the data obtained from the basic design, we proceeded with optimization design using the Zemax design tool. The optimized optical system achieved a resolution performance with a modulation transfer function value of more than 19% for a 280 lines/mm pattern and image distortion within 1.0% for all wavelength rays. In this paper, we verify the feasibility of using recursive numerical computation for the basic design of a compact mobile phone camera.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.2
• /
• pp.87-100
• /
• 2000

As a result of rapid advances in communication technology, fiber optics have begun to be adopted in most telecommunication systems 3s an economic choice Due to the trend of evolution toward broadband communication network with fiber optics and electronic devices. the network design problem for broadband communication has been received a great deal of research attention recently. In this paper, we address a topological design problem for broadband local access network with uncertain demands, which has received surprisingly little attention so far. in our problem, we select a set of hubs and links for constructing network expected penalty cost for the amount of undersupplied In addition to the usual cost terms of the fixed demand problem Our problem can be approximated as a mixed 0-1 integer programming problem by using Szwarc’s linear approximation technique. Then the problem is transformed successfully into a version of classical network design model. Some computational experiments for the model and concluding remarks are described.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.60-68
• /
• 2022

We report on the design of the secondary and the tertiary mirrors used in lightweight assemblies made entirely of silicon carbide (SiC). The essential design points are weight reduction within the acceptable deformation of the mirror surface by gravity release, temperature change, and vibration during or after space launch. To find a design that achieves the target requirements, we established finite element models for various candidate designs and subjected each one to wave front error analyses along gravity directions and in operation temperatures. We also calculated the natural frequencies of the candidate assemblies. Our study suggested that a triangular cell with bipod flexure support can satisfy the target weight within the requirements.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2013

In this paper, an optical system was designed for 3D imaging laser radar with optical scanner. In order to make it easy to scan, the system was designed to inscribe the transmitting objective lens in the receiving lens. In transmitting optics, the beam expander was designed to have a zoom mechanism so that the transmitted beam size would be 4.8 m or 6.8 m at 1 km distance, when the laser source's numerical aperture value is between 0.13 and 0.22. The beam diameter at the target 1 km away was confirmed by design program. The receiving optics for the returning beam from the target was designed for the $16{\times}16$ array detector with $100{\mu}m$ pixel width. The spot diameter in every pixel was designed and verified to be less than $55{\mu}m$. The receiving optics' obscuration ratio by transmitting optics was 11%.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.214-223
• /
• 2010

Optimization of a 30 cm lightweight mirror was proposed with the best optical performance under various loads of gravity and thermal loads with proper boundary conditions. A pattern for a lightweight mirror was generated based on the best optical performance combined with ease of manufacturing for proper design parameters of physical properties of face sheet, back sheet, rib, and web. Evaluation of the optical performances of a telescope mirror was obtained by using the finite element analysis program, NX I-DEAS. Surface errors, individual aberration terms, such as piston, tilts, focus and other aberrations were calculated by using Zernike polynomials. The proposed telescope mirror meets well the opto-mechanical design consideration of RMS surface error less than 16 nm.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.1
• /
• pp.29-39
• /
• 1996

We studied the method which would determine the appropriate additive damping factor for the damped least sequres(DLS) optimization. We calculated eigenvalues of the product of the Jacobian matrix of error function by using the singular value decomposition(SVD) method. While suitable damping factor was appiled to the additive DLS by using SVD and Gaussian elimination method, the convergence and stability of the optimization process were examined in a triplet-type camera lens-system where the condition number is well conditioned. We compared the convergence and stability of merit function when median, maximum and minimum of eigenvalues were used as a damping factor in the optimization process. When damping factor is median of eigenvalue, the convergence and stability of merit function are more excellent than in the case of two other eigenvalues. Thus, we adopt the median of eigenvalues as an appropriate damping factor. Next, by using SVD and Gaussian elimination method, we compound the convergence and stability of optimization process for triplet-type camera lens-system design. In these two method; triplet-type camera lens-system in which condition number is well conditioned, has little improvement with the combination of DLS and SVD.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.94-100
• /
• 2016

A novel optical design for high resolution, large field of view (FOV) and multispectral remote sensing is presented. An f/7.3 Korsch and two f/17.9 Cook three-mirror optical systems are integrated by sharing the primary and secondary mirrors, bias of the FOV, decentering of the apertures and reasonable structure arrangement. The aperture stop of the Korsch system is located on the primary mirror, while those of the Cook systems are on the exit pupils. High resolution image with spectral coverage from visible to near-infrared (NIR) can be acquired through the Korsch system with a focal length of 14 m, while wide-field imaging is accomplished by the two Cook systems whose focal lengths are both 13.24 m. The full FOV is 4°×0.13°, a coverage width of 34.9 km at the altitude of 500 km can then be acquired by push-broom imaging. To facilitate controlling the stray light, the intermediate images and the real exit pupils are spatially available. After optimization, a near diffraction-limited performance and a compact optical package are achieved. The sharing of the on-axis primary and secondary mirrors reduces the cost of fabrication, test, and manufacture effectively. Besides, the two tertiary mirrors of the Cook systems possess the same parameters, further cutting down the cost.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.23-27
• /
• 2007

This research was conducted to assist with domestic eyewear industry to gain better understanding of manufacturing through study relationship between purchase behaviors and selecting elements such as design, brand, price, material and nation. Domestic consumers think that the most important factor is a design when they purchase eyeglasses regardless of kinds and brands of eyeglasses, and optometrists choose the eyewear design as a primary factor when they buy eyeglasses for display and sale. As a role of eyeglasses for fashion items increases, the interest of the eyewear design will be higher. Many optometrists have plans to import and make house brand. Some of them also would like to study eyewear design.