• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1086-1093
• /
• 2013

In this paper, we propose a novel modulation that combines the spatial modulation (SM) with the subcarrier intensity-modulation (SIM) for optical wireless communications. The performance of SIM-SM scheme is compared to a conventional SIM by computer simulation. For the spectral efficiency (SE) of 2bits/s/Hz, the performance gain about 2dB is achieved. As the SE increases to 3bit or 4bits/s/Hz, the Eb/N0 gain becomes about 5dB. It is shown the attenuation for the SIM is more serious than the SIM-SM according to increasing the number of the subcarriers.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.98-101
• /
• 1998

The intermodulation distortion(IMD) due to laser diode nonlinearity of an asynhcronous direct sequence code diviion multiple access(DS/CDMA) system in wireless-optical transmission system model is analzed. A third order polynomial is used to represent laser diode nonlinearity. In DS/CDMA system, only one harmonic of the third-order intermodulation term falls on the signal frequency band and influences the system performance characteristics. To cancel multi-user interference and nonlinear distortion in a DS/CDMA wireless-optical transmission system model, the simple transversal filter structure with N-taps of (N-1) tap delay of 1 chip time delay line is used. It is necessary to select an optimal modulation index that provides a maximum signal-to-noise ratio and the results are useful for CDMA system design.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.384-389
• /
• 2009

Optical wireless communication (OWC) systems are rapidly gaining popularity as effective means of transferring data at high rates over short distances. OWC facilitates rapidly deployable, lightweight, high-capacity communication without licensing fees and tariffs. Nevertheless, the performance of this new technology depends strongly on the atmospheric conditions and the characteristics of the link. In this work, we study the influence of these parameters on both the average (ergodic) capacity and the outage capacity of an OWC system over moderate to strong turbulence channels modeled by gamma-gamma distribution. Moreover, we compare the results that we obtain estimating the average and outage capacities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1840-1846
• /
• 2014

An experimental outdoor optical wireless data communication system with an optical filter in the presence of sunlight or artificial light is presented. For the efficient blocking of light noise outdoors, we employ an optical filter made of microlouver film on the top of the photo diode. This filter is designed to block any light noise incident from an angle higher than $30^{\circ}$ on the assumption that light noise does not face the photo diode horizontally. Outdoor experiments daytime with the optical filtering have been conducted. The experimental results demonstrate that the optical filter effectively blocks nearly all light noise incident from the specified angle or higher and more than 90% of the transmitted data packets are successfully received. The proposed outdoor visible light data communication can thus facilitate a practical free space outdoor optical wireless data transmission.

• Smart Structures and Systems
• /
• v.12 no.1
• /
• pp.23-39
• /
• 2013

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.73-74
• /
• 2006

In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of wire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.660-667
• /
• 1998

In this paper, we used differential amplifiers to reduce crosstalk in a wireless in-house optical interconnection in which two channel beams are overlapped. Experimental results show that environmental optical noise is also reduced using the same principle. This method is realized very easily with differential amplifiers without any optical filters or electrical filters. It is very useful in short distance optical interconnections.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.7-11
• /
• 2008

Future electric lights will be composed of white LEDs (Light Emitting Diodes). Indoor wireless optical communication systems utilizing white LED lights have been studying about it. Generally, plural lights are installed in room. Therefore, their optical path difference must be considered. In this paper, the influence of an optical path difference has been investigated and two approaches against this problem are introduced. One uses OOK-RZ (On-Off Keying, Return-to-Zero) coding and the other uses optical OFDM (Orthogonal Frequency Division Multiplexing). From the results of computer simulations, we have found that these approaches are feasible for the wireless optical communication systems utilizing white LED lights.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.437-443
• /
• 2015

In this paper, we analyze the performance of the all-optical multihop radio over a free space optical (RoFSO) communication system with amplify-and-forward (AF) relays under varying weather conditions. The proposed channel model considers the propagation loss, attenuation and atmospheric fading modeled by the Gamma-Gamma (GG) distribution. Both the amplified spontaneous emission (ASE) noise in the all-optical relays and the background noise projected onto receiver apertures have been considered in the analysis. The lower bound analytical expressions for the end-to-end bit error rate (BER) and outage probability are derived for the multihop system employing the all-optical relays with the full channel state information (CSI). Meanwhile, the exact results for BER and outage probability are obtained via Monte Carlo simulation. Results indicate the performance of the proposed system will be improved by the multihop transmission technology. For a fixed number of relays, the BER and outage probability will be increased with the deterioration of the weather conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.166-171
• /
• 2012

In this paper, short-range underwater wireless communication technique using visible LEDs is proposed. As an alternative to conventional acoustic system, visible LED communications show high quality and high speed data transmission characteristics. We design a frequency modulation-based optical wireless audio transmission system. The CD4046B phase-locked loop device is applied to implement the frequency modulation and demodulation. With a transmission modulation of 100 kHz, audio signal has successfully received at a transmission distance of 30 cm.