• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.101-111
• /
• 2008

This paper introduces a high-speed Reed-Solomon(RS) decoder, which reduces the hardware complexity, and presents an RS decoder based FEC architecture which is used for 40Gb/s optical communication systems. We introduce new pipelined degree computationless modified Euclidean(pDCME) algorithm architecture, which has high throughput and low hardware complexity. The proposed 16 channel RS FEC architecture has two 8 channel RS FEC architectures, which has 8 syndrome computation block and shared single KES block. It can reduce the hardware complexity about 30% compared to the conventional 16 channel 3-parallel FEC architecture, which is 4 syndrome computation block and shared single KES block. The proposed RS FEC architecture has been designed and implemented with the $0.18-{\mu}m$ CMOS technology in a supply voltage of 1.8 V. The result show that total number of gate is 250K and it has a data processing rate of 5.1Gb/s at a clock frequency of 400MHz. The proposed area-efficient architecture can be readily applied to the next generation FEC devices for high-speed optical communications as well as wireless communications.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.139-150
• /
• 2023

Despite various light detection and ranging (LiDAR) architectures, it is very difficult to achieve long-range detection and high resolution in both vertical and horizontal directions with a wide field of view (FOV). The scanning architecture is advantageous for high-performance LiDAR that can attain long-range detection and high resolution for vertical and horizontal directions. However, a large-area photodetector (PD), which is disadvantageous for detection speed, is essentially required to secure the wide FOV. Thus we propose a PD based on the static unitary detector (STUD) technique that can operate multiple small-area PDs as a single large-area PD at a high speed. The InP/InGaAs STUD PIN-PD proposed in this paper is fabricated in various types, ranging from 1,256 ㎛×949 ㎛ using 32 small-area PDs of 1,256 ㎛×19 ㎛. In addition, we measure and analyze the noise and signal characteristics of the LiDAR receiving board, as well as the performance and sensitivity of various types of STUD PDs. Finally, the LiDAR receiving board utilizing the STUD PD is applied to a 3D scanning LiDAR prototype that uses a 1.5-㎛ master oscillator power amplifier laser. This LiDAR precisely detects long-range objects over 50 m away, and acquires high-resolution 3D images of 320 pixels×240 pixels with a diagonal FOV of 32.6 degrees simultaneously.

• The Journal of the Korea Contents Association
• /
• v.6 no.9
• /
• pp.98-107
• /
• 2006

By improving performance of mobile machine(3D engine, 3D accelerator chip set, etc) and developing wireless network technology, a demand for actual contents of users is being increased rapidly. But, there are some difficulties yet for the speedy development of actual contents because of the limitation of development resources that is dependent on each mobile device's different performance. In general, much of the animated character-creation work for mobile environment is still done manually by experienced animator with the method of key frame processing. However, it needs a lot of time and more costs for creating motion. Additionally, it is possible to cause a distortion of motion. In this paper, I solved the difficulties by using a optical motion capture system, it was able to acquire accurate motion data more easily and quickly, and then it was possible to make 3D dance contents efficiently. Also, I showed techniques of key reduction and controlling frame number for using huge amounts of motion capture data in mobile environment which requires less resources. In making 3D dance contents, using an optical motion capture system was verified that it was more efficient to make and use actual-reality contents by creating actual character motion and by decreasing processing time than existing method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.60-67
• /
• 2010

In the ubiquitous age, applications of wireless personal area network (WPAN) technology using LEDs are in progress. However, visible light communications (VLC) using the LEDs have weakness which deteriorate performance of communication because of multi-path fading that occurs propagation delay by interior walls or other things in indoor environments. In this paper, orthogonal frequency division multiplexing (OFDM) scheme is adapted to decrease multi-path fading and multi-path dispersion and to provide high speed data transmission. Besides, to reduce information losses caused by optical noise (incandescent lamps, fluorescent lamps, sunbeam etc.) also proposed channel coding using turbo codes. The encoding and decoding of the proposed system is described, and simulation results are analyzed. We can know that performance of proposed system is increased about 4 [dB] through the simulation results. Also, when the system take doppler effect, the system performance worsened.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.116-120
• /
• 2014

Visible Light Communication is one of the promising technologies for wireless communication due to the possibility to use existing LED lightening infrastructure to transmit data. LED has the ability to turn on and off very fast enough that our human eyes can't recognize so it can be used to transmit data via visible light along with illumination. But it faces flicker problem due to the brightness discrepancies between '1' and '0' bit patterns inside a data frame. Various run length limited (RLL) coding scheme like Manchester code, 4B6B, 8B10B or VPPM can be used to solve flickering problem. So we propose pseudo Manchester codding which can transmit data without modifying LED modulator and demodulator circuit as well as solve flickering problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.755-762
• /
• 2014

In recent year, along with the rapid development of LED technology, many applications using LEDs with Visible Light Communication(VLC) have been researched. Since it is easy to provide LOS communication environment along with cheap deployment cost, the indoor positioning system based on VLC has been actively studied. In this paper, we propose an accurate indoor positioning algorithm using a stereo image sensor and white-light LEDs with the visible light communication. Indoor white-light LEDs are located at the ceiling of a room and broadcast their position information by VLC technology. Mobile receiver with stereo image sensor receives LED position information by VLC and estimates its position and angle information. Simulation results are given to show the efficiency of proposed indoor positioning algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.905-910
• /
• 2010

In this paper, visible light communication(VLC) system modulated by a switching driver circuit of lighting light emitting diode(LED), not only for illumination but also for optical wireless communication, is implemented. Presented system could overcome the drawbacks of prior linear modulation technique such as low efficiency, heat generation, and limits to realization of high power lighting LED. Experimental results from the realized digital audio system are presented to confirm the superiority of the proposed circuit. Our prototype achieves a transmission data rate of 10 Mbps with a radius of 1.5 meters using 20 W output power, and the signals were detected successfully.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.189-195
• /
• 2006

Sea operation monitoring system is a system for the automatic ship operation that is used on the variety sea operations such as laying optical cables on the sea between the countries, laying cables on the seabed for a remote island, laying pipelines for the natural gas, and so forth. This system processes data which obtained through setting up environment and input from several sensors, and display GPS information with ENC data. And this system processes not only data of route file about sea operation, but also realtime information from PDA of client wirelessly connected with AP on wireless LAN. In addition, this system can improve efficiency of the operation as a result of enabling free movement within valid range. This paper design and implementation monitoring system from above appropriate to the embedded system, and improve competitive power of ship through prevention of a ship accident, to keep minimizing operation loads and support both the automatic ship operation and the safety voyage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.799-808
• /
• 2016

The IEEE 802.15.7r1 Task Group (TG7r1), known as the revision of the IEEE 802.15.7 Visible Light Communication standard targeting the commercial usage of visible light communication systems which mainly use either image sensors or cameras, is of interest in this paper. The vast challenge in Image Sensor Communications (ISC), as it has been addressed in the Technical Consideration Document (TCD) of the TG7r1, is the Image Sensor Compatibility to support the variety of different commercial cameras available on the market. The on-going ISC standard must adhere to compatible image sensors regulations. This paper brings an inside review of the TG7r1 and an inside look of related works on Image Sensor Communications. The paper analyzes the compatibility features by introducing a revised model of receiver to explain how those features are necessary. One of the most challenging but interesting features is the capability in being compatible to camera frame rates. The variation of camera frame rate is modeled from verified experimental results. Noticeably, three singular approaches to support frame rates compatibility, including temporal approach, spatial approach, and frequency-domain approach, are proposed on the paper along with concise definitions. Those schemes have been presented as valuable proposals on the call-for-proposal meeting series of the TG7r1 recently.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.97-103
• /
• 2017

In this paper, we aim to investigate the generalization of ZRC codes by performing performance analysis on various coding rates and channel conditions of Zero Reduction Code (ZRC) for dimming control in VLC system. Simulation results show that the ZRC codes with relatively high coding rate achieve the enhanced BER performance as the RMS (Root Mean Square) delay spread value increases in the NLOS channelse. Therefore, it is expected that the designing of the dimming control technology using ZRC in the future visible light communication system will help to determine the coding rate according to the channel state through the analysis result in this study.