• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.843-850
• /
• 2016

This paper introduces a novel modulation scheme for vehicular communication in taking advantage of existing LED lights available on a car. Our proposed 2-Phase Shift Keying (2-PSK) is a spatial modulation approach in which a pair of LED light sources in a car (either rear LEDs or front LEDs) is used as a transmitter. A typical camera (i.e. low frame rate at no greater than 30fps) that either a global shutter camera or a rolling shutter camera can be used as a receiver. The modulation scheme is a part of our Image Sensor Communication proposal submitted to IEEE 802.15.7r1 (TG7r1) recently. Also, a neural network approach is applied to improve the performance of LEDs detection and decoding under the noisy situation. Later, some analysis and experiment results are presented to indicate the performance of our system

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.153-156
• /
• 2004

광 전송 마이크로 셀룰라 시스템과 부반송파 다중 송신 시스템 같은 마이크로파 광 전송기술을 이용한 시스템들은 송신기의 비선형성에 의해서 발생하는 많은 왜곡 성분들, 특히 레이저 다이오드에서 발생한 왜곡 성분들에 의해서 많은 성능의 제한을 받는다. 이러한 왜곡 성분들을 제거하기 위해서 광 피드포워드 방식을 이용한 광 송신기를 제안하였다. 제작된 피드포워드 선형화 아날로그 광 송신기는 2.1 GHz 투톤 실험에서 38 dB의 IMD 개선 효과를 보였다. 여기에서 위상 천이기와 전압 가변 감쇄기는 신호 크기 허용오차를 0.1 dB, 위상 허용오차 $1^{\circ}$범위 이내에서 설계하였다. 이를 위해서 세밀한 위상과 크기의 조정이 가능한 위상 천이기와 전압 가변 감쇄기를 제작하였고, 측정한 결과, 전압 가변에 따른 위상 변화량과 크기 변화량은 각각 위상 천이기는 $90^{\circ}$, 전압 가변 감쇄기는 14 dB를 기록하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.316-323
• /
• 2018

In this paper, we newly introduce the three-level byte-inversion transmission method for preventing LED flicker in visible light communication (VLC). The VLC transmitter sequentially sends the original signal and the inverted signal in byte units using a three-level LED modulator. The average optical power of the LED is kept constant during data transmission, thus flicker-free. In the VLC receiver, the original data is easily recovered using a simple comparator. This structure is very simple because additional clock or carrier is not required for flicker prevention. The developed flicker prevention scheme could be very useful for constructing the flicker-free indoor VLC system in low cost.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.130-135
• /
• 2000

In this study the vibration behavior of the stiffened double cylinder was experimently analyzed. Due to the complex structure of the double cylinder the outside cylinder frequency responses to the exciting forces applied on various posi-tions were analyzed by using spectrum analyzer in conjunction with an accelerometer and the natural frequencies were obtained. The technique of time-averaged holographic interferometry is applied to study the vibration characteristics of outside cylinder with stiffening T frame. The experimental data showed that the T frame had salient effect of damping on the testing structure at most of resonances. however the experimental results also revealed interesting phenomenon. At some particular frequencies the T frame. The experimental data showed that the T frame had salient effect of damping on the testing structure at most of resonances. However the experimental results also revealed interesting phenomenon. At some particular frequencies the T frame seemed to behave as a transmitter. In addition it has been successfully demon-started that optical method such as holographic interferometry is well suited for the identification of mode shapes. They can give us a whole-field non-contact measurement instead of the point-wise measurement by accelerometer in classical modal testing.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.579-585
• /
• 2020

In this study, we used byte-inversion transmission method to prevent the flicker of lighting source in a visible light data communication link. In the transmitter, the non-return-to-zero (NRZ) signal with 9.6 kbps was on-off keying (OOK) modulated with a 100 kHz square wave carrier and byte-inversion signal was added after each byte to make the average optical power of the light-emitting diode (LED) constant. In the receiver, we used a band-pass filter to eliminate the interference of the 120 Hz noise which was induced from the adjacent light lamps, and an OOK demodulator to recover the original NRZ signal This scheme is useful in constructing wireless data networks using the illumination of visible light lamps.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.48-53
• /
• 2006

This paper describes the electrical characteristics of monolithic optical transceiver circuitry being used in the fiber optic modules. It has been designed and fabricated, and compared with two chips version transceiver when operates at 155.52 Mbps data rates. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. To compare the two kind of fiber optic modules using each chip, single chip version has similar properties to two chip version in the electrical characteristics as noise and others.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.1-9
• /
• 2005

We have studied the dispersion properties of a 40 channel x 10 Gbit/s wavelength division multiplexer(WDM) transmission link using standard single mode fiber with all EDFA amplification over 30 x 100 km spans. The dispersion map of the link was investigated by adding fiber sections with positive or negative dispersion at the transmitter, within each amplifier span, and at the receiver. Optimum combinations of these dispersive fiber lengths were attained to significantly enhance the overall transmission performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.787-796
• /
• 2013

In this paper, the visible light communication (VLC) techniques based on the carrier modulation are considered in order to realize the VLC application service that has the functions of the high speed optical sensing and the wide range reception from VLC transmitter. The VLC hardware circuits based on the 32.768 kHz low frequency carrier and 4 MHz high frequency carrier are designed and implemented respectively, and the signal waveform generated from the implemented circuits are observed. In addition, various performance experiments are done with the prototypes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.198-205
• /
• 2016

In the contemporary world, the breakthrough of the ultra-modern technologies has been blessed with the camera. This device has become omnipresent either integrated on with other devices such as smartphones, notebooks, laptops, handheld devices and so on. In addition, digital signage, display and monitors have also become very widespread around us everywhere. These types of scenarios have made imaginable to imagine about the consuming of the unused resources. The dual use of displayed contents can make it possible to use it as an advertisement as well as a transmitter for camera based communication. In this study, a digital watermarking algorithm based communication method has been analyzed. We have introduced Binary Pattern (BP) based a new message extracting algorithm to extract message in an efficient way from the watermarked image compared to other algorithms. Besides, the previous works using camera and display have been illustrated using comparative analysis. This paper has demonstrated an advantageous overview using the experimental results which reveals that the proposed methodology significantly reduces the complexity while augmenting the advantages of the proposed scheme. Moreover, the simulation results have shown the advantages of the proposed scheme over the other schemes.