• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.19-26
• /
• 2016

본 논문은 국내 주요 시설 및 국가 기반 시설로 변화되고 있는 터널 및 지하 공동구의 조기화재탐지설비시스템 설치에 이용되고 있는 광센서 선형 화재 감지 시스템에 대한 특성 분석을 목적으로 연구를 수행하였다. 연구 방법으로는 저온 환경인 $-20^{\circ}C$에서 5일간 5가지의 열감지기 중에서 작동 여부를 확인한 결과 광센서 선형 감지기만 작동하는 것을 알 수 있었다. 또한 터널과 같은 풍속이 발생되는 곳을 가정하여 축소 모형 터널을 제작하여 0 m/s와 1 m/s를 변수로 하여 광센서 선형 감지기의 작동 특성을 분석하였다. 그 결과로서 광센서 선형 감지 시스템의 온도 변화에 있어서는 풍속이 없을 때인 0 m/s 때의 값이 높게 나타나는 것을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.47-50
• /
• 2000

Optical triangulation is one of the most common methods for acquiring range data. Using this method. We have developed a new type of Laser Displacement Sensor. We used Area CCD instead of linear CCD and PSD (Position Sensitive Detector). And we have developed the robust algorithm for increasing the accuracy and used USB instead of RS-232C for increasing speed. We present results that demonstrate the validity of our method using optical triangulation technique, Area CCD, and USB.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.27-38
• /
• 2016

본 논문은 현재 국외기술에 의존하고 있는 광센서 선형감지기를 이용한 화재감지시스템인 분산온도감지(DTS) 시스템을 국산화 기술로 개발하기 위한 연구이다. 이에 본 연구에서는 광섬유 내에서 발생되는 빛의 역산란광 중 온도감지에 주로 사용되는 라만산란광의 전기적 신호파형을 오실로스코프를 이용하여 분석하였다. 측정결과 Stokes 신호파형은 온도가 상승해도 변화량이 거의 없었으나, 온도에 민감한 anti-Stokes 신호파형은 상대적으로 그 값이 증가하는 것을 확인할 수 있었다. 그리고 라만산란광을 이용하여 화재를 감지할 수 있는 광중계기 및 광수신기로 구성된 광센서 선형 화재감지시스템인 K-DTS 시스템을 개발하였다. 개발된 K-DTS 시스템에 대하여 차동식 및 정온식 감도시험기를 이용하여 차동식 및 정온식 감지기로서의 감도시험을 진행해 본 결과 형식승인 기준을 만족하고 있는 것을 확인할 수 있었다. 또한, 개발된 K-DTS 시스템의 성능평가를 위해 국외에서 수입되어 가장 많이 사용되고 있는 S-DTS 시스템과 성능비교실험을 진행하였다. 모형터널을 이용한 성능실험결과 화재감지위치 및 화재온도 측정에서 유사한 성능을 나타내는 것을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.64-72
• /
• 2003

This paper presents a small loading and positioning device using VCM (voice coil motor). The developed device consists of a VCM-based linear actuating system, a capacitance displacement sensor and a cantilever deflection sensing system. The trust force of the VCM proportional to applied current moves the column supported on two pairs of parallel leaf springs. The infinitesimal displacement of moved column is detected by capacitance displacement sensor with a resolution of 0.1nm and a repeatability of 1nm. Also, a micro cantilever with known stiffness (200N/m), which is mounted on the end of the column, is used as a force sensor to detect the load applied to a specimen. After the cantilever contacts with the specimen, the deflection of cantilever and the load applied to the specimen are measured by using an optical lever system which consists of a diode laser, a mirror and a PSD (position sensitive detector). In this paper, an experimental system was constructed and its actuator and sensing parts were tested and calibrated. Also, the constructed system was applied to the indentation experiment and the load-displacement curve of aluminum was obtained. Experimental results showed that the developed device can be applied for performing nano indentation.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1038-1046
• /
• 2008

This study was carried out to develop a small-sized biosensor based on surface plasmon resonance (SPR) for the rapid identification of insecticide residues for food safety. The SPR biosensor module consists of a single 770 nm-light emitting diodes (LED) light source, several optical lenses for transferring light, a hemisphere sensor chip, photo detector, A/D converter, power source, and software for signal processing using a computer. Except for the computer, the size and weight of the sensor module are 150 (L)$\times$70 (W)$\times$120 (H) mm and 828 g, respectively. Validation and application procedures were designed to assess refractive index analysis, affinity properties, sensitivity, linearity, limits of detection, and robustness which includes an analysis of baseline stability and reproducibility of ligand immobilization using carbamate (carbofuran and carbaryl) and organophosphate (cadusafos, ethoprofos, and chlorpyrifos) insecticide residues. With direct binding analysis, insecticide residues were detected at less than the minimum 0.01 ppm and analyzed in less than 100 sec with a good linear relationship. Based on these results, we find that the binding interaction with active target groups in enzymes using the miniaturized SPR biosensor could detect low concentrations which satisfy the maximum residue limits for pesticide tolerance in Korea, Japan, and the USA.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.456-460
• /
• 2020

In this research, a radiation detection backpack to be used discreetly or by a wide range of users was developed using array silicon-photomultiplier (SiPM) and CsI (Tl), and its characteristics were evaluated. The R-squared value, which indicates the responsiveness of a detector based on the signal intensity, was determined to be 0.981, indicating a good linear responsivity. The energy resolutions for gamma radiation energies of Co-57 (122 keV), Ba-133 (356 keV), Cs-137 (662 keV), and Co-60 (1332 keV) were found to be 13.40, 10.50, 6.77, and 3.16%, respectively. These results confirm good energy resolution characteristics. Furthermore, in the case of mixed sources, the gamma radiation peaks were readily distinguishable, and the R-squared value for energy linearity was calculated to be 0.999, demonstrating an exceptional energy linearity. Further research based on the results of this study would enable the commercialization of lightweight SiPM-based wireless radiation detection backpacks that can be used for longer durations by replacing the photomultiplier tube, which is mainly used as the optical sensor in existing radiation detection backpacks.

• 한국광학회지
• /
• 제16권4호
• /
• pp.354-360
• /
• 2005

[ $480{\times}6$ ] 배열 HgCdTe(MCT) 검출기를 사용하는 고성능의 원적외선(LWIR) 줌 열상센서를 개발하였다. 광학계는 대략 190 mm 직경을 갖는 대물 망원경과 광학적으로 잘 정렬된 주사장치로 구성된다 망원경의 줌 비율은 3:1이며 배율의 변환은 2개의 렌즈 그룹을 이동시킴으로써 수행된다. 이동하는 2개의 렌즈 그룹으로 열상장비의 비열화도 함께 수행한다. 비열화 수행을 통해 광범위한 운용온도 범위에서도 시스템의 성능 저하 없이 활용이 가능하다. 한편 개발된 열상장비는 16:9 양상비를 갖는 고화질 텔레비전(HDTV)에 시현도 가능하다. HDTV 형태의 경우 주사장치는 62만 화소까지 영상 시현이 가능하다. 이 기능은 일반적인 TV 시현의 경우보다 성능의 저하 없이 수평 시계각을 넓혀 주는 역할을 한다. 설계 및 제작된 원적외선 열상장비의 고배율에서 최소분해가능온도차(MRTD)를 측정한 결과, 2 cycles/mrad의 공간주파수에서 0.04 K 이하 및 8 cycles/mrad의 공간주파수에서 0.23 K의 우수한 결과를 보였다.

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.97-101
• /
• 2018

Purpose: This study evaluated the radiopacity of contemporary luting cements using conventional and digital radiography. Materials and Methods: Disc specimens (N=24, n=6 per group, ø$7mm{\times}1mm$) were prepared using 4 resin-based luting cements (Duolink, Multilink N, Panavia F 2.0, and U-cem). The specimens were radiographed using films, a complementary metal oxide semiconductor (CMOS) sensor, and a photostimulable phosphor plate (PSP) with a 10-step aluminum step wedge (1 mm incremental steps) and a 1-mm-thick tooth cut. The settings were 70 kVp, 4 mA, and 30 cm, with an exposure time of 0.2 s for the films and 0.1 s for the CMOS sensor and PSP. The films were scanned using a scanner. The radiopacity of the luting cements and tooth was measured using a densitometer for the film and NIH ImageJ software for the images obtained from the CMOS sensor, PSP, and scanned films. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Multilink (3.44-4.33) showed the highest radiopacity, followed by U-cem (1.81-2.88), Panavia F 2.0 (1.51-2.69), and Duolink (1.48-2.59). The $R^2$ values of the optical density of the aluminum step wedge were 0.9923 for the films, 0.9989 for the PSP, 0.9986 for the scanned films, and 0.9266 for the CMOS sensor in the linear regression models. Conclusion: The radiopacities of the luting materials were greater than those of aluminum or dentin at the same thickness. PSP is recommended as a detector for radiopacity measurements because of its accuracy and convenience.

• 천문학회보
• /
• 제41권2호
• /
• pp.64.3-65
• /
• 2016

The NISS (Near-infrared Imaging Spectrometer for Star formation history) is the near-infrared instrument optimized to the Next Generation of small satellite series (NEXTSat). The capability of both imaging and low spectral resolution spectroscopy in the near-infrared range is a unique function of the NISS. The major scientific mission is to study the cosmic star formation history in local and distant universe. For those purposes, the main observational targets are nearby galaxies, galaxy clusters, star-forming regions and low background regions. The off-axis optical design is optimized to have a wide field of view ($2deg.{\times}2deg.$) as well as the wide wavelength range from 0.95 to $3.8{\mu}m$. Two linear variable filters are used to realize the imaging spectroscopy with the spectral resolution of ~20. The mechanical structure is considered to endure the launching condition as well as the space environment. The compact dewar is confirmed to operate the infrared detector as well as filters at 80K stage. The electronics is tested to obtain and process the signal from infrared sensor and to communicate with the satellite. After the test and calibration of the engineering qualification model (EQM), the flight model of the NSS is assembled and integrated into the satellite. To verify operations of the satellite in space, the space environment tests such as the vibration, shock and thermal-vacuum test were performed. Here, we report the test results of the flight model of the NISS.